- Research Article
- 10.1016/j.cej.2026.174794
Superamphiphobic coating with microskeleton-filler structure for cooking fume: Excellent anti-wear and anti-corrosion
- Apr 01, 2026
- Chemical Engineering Journal
- Yang Liu + 4 more +4
Publications from 2021 to 2026
Showing 10 of 15 papers
Superamphiphobic coating with microskeleton-filler structure for cooking fume: Excellent anti-wear and anti-corrosion
An information resource for facilitating food consumption trend research from flavor perspectives
Numerical Investigation of the Aerodynamic and Aeroacoustic Characteristics of a Double-suction Centrifugal Fan under Different Operating Conditions
Centrifugal fans are widely used in the ventilation and domestic appliance industries. Their aerodynamic and aeroacoustic characteristics vary significantly in different application scenarios and operating conditions. This study applied a double-suction multiblade centrifugal fan to a range hood. The full three-dimensional flow and acoustic field were calculated synchronously using direct computational aeroacoustics (CAA) based on the lattice Boltzmann method (LBM) to investigate the internal flow, aerodynamic noise, and acoustic source characteristics of the fan under different operating conditions. We focused on two typical operating conditions: the maximum volume flow rate and working volume flow rate. The accuracy of the numerical simulation was verified using experimental data measured from the performance test bench and the semianechoic chamber. The flow field results show that more than 70% of the airflow enters the volute from the main wind inlet; this asymmetric wind intake condition creates an asymmetric flow pattern inside the volute. Acoustic waves radiate to the far-field mainly through the inlet and outlet of the range hood. The propagation characteristics of a dipole source are not very obvious and the tonal noise associated with the blade passage frequency (BPF) is not significant. In addition to the acoustic sources identified in the impeller region, the volute tongue, and the gap between the impeller and the inlet nozzle, two other significant acoustic sources are identified in the outlet collector and inlet nozzle regions.
Read moreThe chemical components and adhesion performance of the oil fume fouling sourced from cooking: Experimental investigation and molecular simulation
Analysis of Performance and Noise on an Asymmetric Double-Suction Fan with Non-Uniformity Inlet Conditions
Asymmetric double-suction centrifugal fans are commonly employed in home kitchens to remove cooking pollutants, and their performance is critical to maintaining a healthy indoor environment. However, inlet condition variations significantly influence the aerodynamic efficiency and noise levels. This study utilizes a combination of performance testing and a large eddy simulation to analyze the impact of different inlet conditions on the performance curve, impeller outlet pressure pulsation, unsteady flow structures, and sound quality of an asymmetric double-suction centrifugal fan. A non-uniform air distribution at the inlet is proposed to enhance the fan’s aerodynamic and noise characteristics. The findings reveal that when the inlet area is reduced to less than 70% of its fully open state, the aerodynamic performance declines with decreasing intake area. The amplitude of the superimposed blade-passing frequency is minimized when only the left inlet is open; the pressure coefficient’s fluctuation amplitude in the time domain reaches 0.4, with sharpness peaking at 3.1. In the optimized design, the maximum deviation in total pressure efficiency is limited to 1.96%, with loudness reduced by four sones and improved sharpness and roughness. These results provide valuable insights into the design and noise reduction of asymmetric double-suction squirrel-cage fans.
Read moreTorque Quality Optimization of Combined-Halbach Array AFPMM with Asymmetric Skewed Poles Based on SMPSO Algorithm
Due to its high torque density and compact structure, axial-flux permanent magnet machine (AFPMM) shows obvious advantages in direct drive and miniaturization. In order to further adapt the machine to the requirements and improve the performance, an asymmetric bidirectional skewed poles combined-Halbach array rotor structure is proposed and applied to the AFPMM to improve the torque density, suppress the torque ripple and improve the stability of the machine. Firstly, a 3D finite element method (FEM) was used to establish the machine. Then, the XGBoost (eXtreme Gradient Boosting) model was used to predict the machine parameters, and establish high-precision surrogate model. Finally, the speed-constrained multi-objective particle swarm optimization (SMPSO) algorithm was used to optimize the rotor skewing angle, phase shifting angle, permanent magnet (PM) thickness and pole-arc coefficient, aiming at average torque, torque ripple and unit volume magnet torque. Compared with the machine without skewed pole, the machine proposed in this paper showed obvious advantages, the average torque increased by 5%, the torque ripple decreased by 50%, and the unit volume magnet torque increased by 23.5%.
Read moreControl of thermal uniformity in microwave heating process by BPNN and adaptive particle swarm optimization
Stencil printing and sintering formation performance of tempered vacuum glazing support pillar
Shock tube experiments and numerical study on ignition delay times of ethane in super lean and ultra-lean combustion
Investigation of Unsteady Pressure Pulsation in New Type Dishwasher Pump with Special Double Tongue Volute
Through numerical simulations, this work analyzes the unsteady pressure pulsation characteristics in new type of dishwasher pump with double tongue volute and single tongue volute, under volute static and rotation conditions. Likewise, the performance tests were also carried out to verify the numerical results. Multiple monitoring points were set at the various positions of new type dishwasher pump to collect the pressure pulsation signals, and the relevant frequency signals were obtained via Fast Fourier Transform, to analyze the influence of volute tongue and its passive speed on the pump performance. The results reveal that when the double tongue volute is stationary, the pressure pulsation amplitudes increase from the impeller inlet to the impeller outlet. Under the influence of shedding vortex, the pressure pulsation in the lateral region of tongue becomes disorganized, and the main frequency of pressure pulsation changes from blade frequency to shaft frequency. In addition, compared with the static volute, double tongue volute can effectively guide the water flow out of the tongue during the rotation process, thus ensuring good periodicity for pressure pulsation in the tongue region. Accordingly, a volute reference scheme with passive rotation speed is proposed in this study, which can effectively improve the pressure pulsation at tongue position, and provides a new idea for rotor-stator interference to guide the innovation of dishwasher.
Read more