- Research Article
1
- 10.1016/j.cemconcomp.2026.106542
Cellulose-reinforced polyacrylamide cement composite electrolyte for structural supercapacitors
- May 01, 2026
- Cement and Concrete Composites
- Anur Oumer + 2 more +2
Publications from 2021 to 2026
Showing 10 of 565 papers
Cellulose-reinforced polyacrylamide cement composite electrolyte for structural supercapacitors
Effects of <scp> NH <sub>3</sub> </scp> co‐firing ratios on performance of a 500 <scp> MW <sub>e</sub> </scp> pulverized coal combustor using a compartment model
Abstract This study developed a 1D compartment model with 21 continuous stirred tank reactors to evaluate NH 3 co‐firing (0%–30%) with bituminous coal (BC) and Ninh Binh anthracite (NB) in a 500 MWe pulverized coal (PC) combustor, advancing low‐emission power generation for using Vietnam's coal resources. The model employs 341 reactions, including 117 nitrogen‐related, and accurately predicts combustion performance and emissions. Without NH 3 co‐firing, BC and NB show comparable combustion, with NB's higher fixed carbon (61.8 wt.% vs. 54.7 wt.%) driving faster heat release. At 10% NH 3 , NO x emissions remain stable (123.6–126.5 ppm vs. 122.3–125.5 ppm at 0%), the pathway favouring N 2 O conversion to N 2 . At 30% NH 3 , NO x increases significantly (639.8 ppm for BC, 565.7 ppm for NB) due to the NH 3 ➔ NH 2 ➔ HNO ➔ NO pathway, amplified by the BC's higher volatile matter (29.5 wt.% vs. 13.3 wt.%). CO 2 emissions decrease by 28.2% for BC and 28.0% for NB, leveraged by NH 3 's carbon‐free nature. However, increased NO x emissions at 30% NH 3 indicate trade‐offs which require further investigation. This model can be used for evaluating NH 3 co‐firing ratios in industrial‐scale combustors, balancing NO x control and CO 2 reduction while elucidating emission formation pathways.
Read moreHydrodynamic evaluation of paddy field dams for flood mitigation using the SWMM model
This study investigates the flood mitigation potential of paddy field dams (PFD) in a flood-prone agricultural catchment in central Taiwan using a coupled hydrological-hydrodynamic modeling approach with the Storm Water Management Model (SWMM). Simulations incorporating bi-directional weir structures in paddy field boundaries demonstrate substantial flood peak attenuation, with discharge reductions exceeding 60% in minor drainage channels, while reductions in primary conduits reached 11.5% during a historical storm event and ranged from 10.4% to 17.6% across 10- and 50-year design storm scenarios. Spatial analysis reveals that PFD performance is highly heterogeneous and governed by localized hydrodynamic-topographic coupling. Besides, the retention capacity of PFD is significantly enhanced in low-lying fields near drainage confluences where backwater effects prolong hydraulic interaction. Moreover, a dynamic interaction was identified between the temporal evolution of piezometric pressure within the PFDs and the hydraulic head fluctuations associated with the flood peak in adjacent drainage channels. This hydraulic coupling governs the directionality of transverse weir flow and modulates the effective floodwater storage capacity of the PFDs, thereby exerting a first-order control on their overall flood mitigation performance. These findings demonstrate that the effectiveness of PFDs can be substantially improved when their design and placement account for field elevation gradients and local channel hydraulics, rather than following uniform or spatially arbitrary installation strategies. This study establishes a hydrodynamically informed framework for targeted implementation of decentralized flood mitigation measures, offering a practical alternative to conventional uniform deployment approaches, and highlight the potential of multifunctional paddy field infrastructure to enhance flood resilience. • Evaluates the spatial performance of Paddy Field Dam (PFD) through a sophisticated hydrodynamic model - SWMM. • Assesses hydrodynamics governing bidirectional exchanges between PFD units and drainage channels. • Introduces a strategic framework for the spatial optimization of PFD placement to identify mitigation hotspots. • Demonstrates that PFD performance is sensitive to localized spatial configurations and weir crest elevations.
Read moreEcological-health risks assessment and source apportionment of potentially toxic elements (PTEs) in surface dust near copper mine.
Development of future-oriented alternative poultry livestock products utilizing Protaetia brevitarsis seulensis larvae
Integration of advanced technologies from the Fourth Industrial Revolution is accelerating the growth of the food technology sector. Rising global meat consumption driven by population growth raises concerns about food security, environmental impact, and animal ethics, increasing interest in alternative protein sources. Among these, Protaetia brevitarsis seulensis larvae have drawn attention due to their high nutritional value and functional properties such as antioxidant, anti-inflammatory, and anticancer effects. Compared with conventional livestock, they offer enhanced sustainability, efficient resource use, and high-quality protein and micronutrient content. In the Republic of Korea, Protaetia brevitarsis seulensis larvae are approved as food ingredients and are increasingly applied to processed products. Incorporating these larvae into meat products, particularly chicken-based items like sausages and patties, has shown improvements in nutritional and functional quality. Unlike general reviews of edible insects, this study focuses specifically on their potential in poultry-based applications, offering a novel perspective. This targeted approach highlights their advantages as functional ingredients in health-oriented meat alternatives. Despite promising attributes, challenges such as consumer acceptance, regulatory clarity, and mass production remain. Future research should aim to optimize rearing and processing technologies and develop public education strategies to facilitate adoption. Overall, Protaetia brevitarsis seulensis larvae represent a promising alternative protein that could support sustainable food systems while reducing the environmental footprint of livestock production.
Read morePredictive modeling of Salmonella Thompson growth in unpasteurized liquid egg products.
Salmonella Thompson is a major cause of large-scale foodborne disease outbreaks worldwide; however, research on S. Thompson remains limited. This study investigates the development of a predictive model for the growth of S. Thompson in unpasteurized liquid egg products, such as liquid egg white, liquid egg yolk, and liquid whole egg, to understand the associated health risks. Unpasteurized liquid egg products, confirmed to be free of Salmonella spp., were inoculated with S. Thompson and incubated at various temperatures. Growth kinetic parameters were estimated using both primary and secondary predictive models, including the Baranyi and Roberts model and second-order polynomial models. The effects of environmental factors on S. Thompson growth were analyzed to establish a comprehensive risk assessment framework. The growth curves of S. Thompson exhibited a typical bacterial sigmoidal pattern characteristic of bacterial proliferation, with the Baranyi model providing the best fit for describing the growth kinetics. The secondary model accurately predicted the effect of temperature on growth rate, demonstrating that S. Thompson proliferates rapidly under specific environmental conditions. Model validation indicated high accuracy, confirming the reliability of the developed model for risk assessment applications. The established predictive model enables quantitative assessment of the growth behavior of S. Thompson in unpasteurized liquid egg products. This model can be used in risk assessment and food safety management strategies to mitigate the risk of foodborne pathogen contamination in the food industry.
Read moreNanomaterial-based total analysis systems for isolation and detection of exosomal biomarkers in cancer diagnosis
Optimization and mechanistic insights pertaining to cadmium removal using the biochar derived from waste mushroom logs
Changes of Growth and Hyperspectral Reflectances in <i>Paspalum distichum</i> <scp>var.</scp> <i>indutum</i> Under Different Water and Nutrient Conditions
ABSTRACT Paspalum distichum var. indutum is an invasive species problematic in South Korea, particularly in river basins. The study aimed to determine how soil moisture and nutrient conditions affect its growth. Experiments involved moderate moisture (T1), flooding (T2), flooding with nitrogen (T3), and flooding with nitrogen and phosphorus (T4). The research found that P. distichum var. indutum grew better under flooded conditions (T2–T4) compared to nonflooded conditions (T1), with the best growth observed in T4 due to increased plant height, root number, and stem thickness. Photosynthetic rate and aboveground biomass were highest when both nitrogen and phosphorus were present under flooded conditions. The presence of other plant species was greater in T1 and T2, indicating that as P. distichum var. indutum became more dominant, the diversity of other species declined. Vegetation indices calculated with hyperspectral reflectance were highest in T1 during the initial growth after transplanting. Among the vegetation indices, EVI, PSSRa, PSSRb, and PSSRc functionally assessed the growth status of P. distichum var. indutum under various growing conditions. P. distichum var. indutum requires flooding conditions for vigorous growth, and when nitrogen and phosphorus are sufficient, it grows more robustly than other plant species. Therefore, controlling the influx of nutrients is required to prevent the proliferation of this invasive species along this riverside.
Read moreEnergy-Efficient Cooperative Inference in Multi-Device Edge Networks: A Lyapunov-Based Approach
In mobile edge computing (MEC) networks, the limited computational capabilities of edge devices present challenges in achieving energy-efficient and high-accuracy inference, highlighting the critical role of cooperative inference with an edge server. This study proposes a cooperative inference framework in which edge devices employ dual confidence thresholds to filter ambiguous images, which are stored in task buffer queues, and offloaded to the edge server for more accurate inferences. We conduct a numerical analysis of the inference accuracy and energy consumption for the proposed cooperative inference method and formulate a joint optimization problem to determine the optimal confidence thresholds, offloading ratio, transmit power, and transmission/reception time, aiming to minimize energy consumption while ensuring accuracy and queue stability. We employ a Lyapunov-based optimization approach to convert this optimization problem into a time-independent real-time decision problem. Subsequently, we decompose it into tractable subproblems and propose an iterative algorithm based on the block coordinate descent method to derive suboptimal variables efficiently. The experimental results reveal a trade-off between inference accuracy and cooperation penalty depending on the confidence thresholds. In particular, optimizing these thresholds in conjunction with radio resources significantly reduces energy consumption and queue backlog while maintaining the required accuracy in diverse MEC environments, compared with the conventional inference methods.
Read more