- Research Article
2
- 10.1016/j.ijfatigue.2025.109457
An effective approach for identifying fatigue-critical defects from X-ray 3D reconstruction: Example in L-PBF AlSil0Mg alloys
- May 01, 2026
- International Journal of Fatigue
- Zhengkai Wu + 8 more +8
Publications from 2021 to 2026
Showing 10 of 298 papers
An effective approach for identifying fatigue-critical defects from X-ray 3D reconstruction: Example in L-PBF AlSil0Mg alloys
Glycosaminoglycan-mimetic Gelatin-Methacrylate/κ-Carrageenan bioink: A synergistic approach for enhanced printability, osteogenesis, and apatite mineralization in bone constructs.
Engineering bioinks that integrate printability, mechanical stability, and osteoconductivity remains a significant challenge for generating mineralizing bone tissue models. While numerous gelatin methacrylate (GelMA)-based bioinks have been developed, comprehensive demonstration of cell-mediated, apatite-like mineral formation within bioprinted constructs remains limited. Here, we present a synergistic gelatin-methacrylate/κ-carrageenan (GelMA/κCGN) composite hydrogel that couples printability with mineralization potential. Incorporation of κCGN increases pre-gel viscoelasticity, improves shear-thinning, and maintains rapid photocrosslinking of GelMA, enabling uniform filament extrusion, multilayer stacking, and high shape fidelity. The composite hydrogels display reinforced compressive properties and improved structural stability compared to GelMA. Human mesenchymal stem cells (hMSCs) embedded in these constructs remain viable and exhibit a strong osteogenic programme. Histological staining demonstrates abundant collagen matrix deposition, accompanied by calcium accumulation. Localized SEM-EDS compositional analysis of discrete domains reveals calcium‑phosphorus co-localization and Ca/P ratios consistent with early-stage, calcium-deficient apatite-like phases, supporting cell-mediated matrix mineralization within the 3D hydrogel microenvironment. Bioprinted constructs retain these characteristics, supporting homogeneous cell distribution, sustained osteogenic differentiation, and robust matrix deposition. Collectively, these findings demonstrate that engineered GelMA/κCGN composite hydrogels, integrating optimized rheological performance with biologically driven, apatite-like mineralization, offer a promising platform for bone tissue engineering and advanced in vitro models.
Read moreAggregation‐induced enhanced emission for quantification of recycled content in automotive plastics
Abstract The use of plastics in the automotive industry is increasing due to their versatility, light weight and affordability. To improve their sustainability credentials, incorporation of recycled content is desired, driven by recent European Union mandates for 25% recycled content for automotive plastics. Current methods to quantify recycled content, however, are imprecise and could promote fraud. This paper extends a method to quantify recycled content in packaging plastics using a fluorescent brightener, 4,4′‐bis(2‐benzoxazolyl)stilbene (BBS), to automotive‐grade polymers. BBS aggregates above threshold concentrations to exhibit aggregation‐induced enhanced emission (AIEE). This study investigates whether fluorescence emission, lifetime and colour analyses can be used to quantify recycled content in four automotive plastics with different chemical structures, matrices or fillers. Quantification using BBS AIEE was most successful for semicrystalline polymers with minimal additives (polyamide‐6 and polyamide‐6,6), with high confidence correlations between fluorescence emission and lifetime measurements and recycled content. Detection was suppressed in amorphous polycarbonates and filled polypropylenes, suggesting this quantification technique may be application‐limited. These new insights into quantifying recycled content in automotive plastics point to both opportunities and limitations for fluorescence‐based techniques in assuring a more circular world. © 2026 The Author(s). Polymer International published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
Read moreFibre phantom generation using FibreSimulator: an open-source Python tool.
Fibre-reinforced polymer composites are utilized across many industries for their stiffness and strength. Visualization of their internal structure is critical to understand their mechanical properties, with computed tomography serving as apopular non-destructive method. While classical tomographic reconstruction algorithms do not rely on training data, modern machine-learning-based methods require large datasets that realistically reflect experimental imaging conditions. However, acquiring such datasets for composites is challenging due to limited access to the ground truth and the high cost of repeated scans. There is therefore a need for realistic, controllable and labelled synthetic phantoms. To address this gap, we present FibreSimulator, an open-source Python tool that generates 3D synthetic phantoms of unidirectional fibre-reinforced polymers with customizable material properties, fibre orientations and geometrical features. The simulator is integrated with the ASTRA toolbox to simulate tomographic scans of the generated phantoms. We demonstrate its capacity through experiments evaluating how tomographic scan settings affect reconstruction and segmentation. Simulated tomographic experiments show that reducing the number of X-ray projections or lowering beam intensity (i.e. increasing noise) leads to blurred fibre boundaries, overestimated fibre diameters and fewer detectable fibres. While these qualitative effects are well known, FibreSimulator enables their systematic and quantitative investigation under fully controlled conditions, with access to the ground truth. In particular, by varying acquisition parameters and composite properties, we observe a nonlinear trend in detection accuracy arising from undersampling and fibre-overlap artefacts. Such controlled studies are difficult to perform experimentally due to cost, limited repeatability and absence of the ground truth. These results highlight FibreSimulator as a valuable tool for optimizing parameters and guiding experimental design under controllable conditions.
Read moreTi Nb alloy coatings for anode PTLs in PEM water electrolyzers
The characterisation of SiCf/SiC composites made by conventional and particle enhanced polymer infiltration pyrolysis
Multivalent ligands regulate dimensional engineering for inverted perovskite solar modules.
Multivalent, resonance-stabilized amidinium ligands enable stronger chemical coordination and reduced deprotonation compared with conventional monovalent ammonium ligands in low-dimensional perovskites. Here, we introduce a controllable one- to two-dimensional (1D-to-2D) structural transition strategy by systematically tuning ligand conformation, thereby modulating hydrogen bonding, π-π stacking, and basicity to elucidate the relationship between molecular structure, interfacial interactions, and resulting dimensionality. The 1D-amidinium perovskite structure, with its pronounced geometric anisotropy, impedes uniform surface coverage and defect passivation. In contrast, the 2D-amidinium perovskite forms a continuous, homogeneous interfacial layer, enabling more effective defect passivation and favorable energy-level alignment. With dimensionality control, inverted 3D/2D-amidinium perovskite solar cells deliver 25.4% power conversion efficiency (1.1 square centimeters, steady-state certified) and maintain >95% of their initial efficiency after 1100 hours of continuous 1-sun operation at 85°C.
Read moreGraphene nanoplatelets and chemical crosslinker enhanced water-based polyurethane elastomer nanocomposites
In this work, graphene nanoplatelets (GNP) and water-based crosslinker (WCL) were systematically employed to reinforce water-based polyurethane (WPU) matrix, offering strong enhancement in mechanical and thermal properties. It should be noted that unfunctionalised GNP as used in this study is known to be incompatible with water-based systems. Therefore, dispersing GNP in water-based elastomers (WBE) such as WPU was one of the problems addressed in this work by employing a novel water-bath technology. In addition, WCL was synergistically employed with GNP for the first time as a reinforcement in WPU. The research presents robust enhancement in mechanical properties realised through thorough static and dynamic mechanical analysis. With GNP/WPU and GNP/WPU/WCL nanocomposites achieving ∼13 – 25% and ∼2.5–fold enhancement in modulus respectively across loadings of 0.05 – 1 wt% at low-strain, which is extremely crucial for high-performing elastomers. Interestingly, the effective toughening in mechanical properties achieved via GNP-alone was realised without loss in elongation, contrary to the result obtained for WCL-infused nanocomposites. As the unfunctionalised GNP showed only a slight crosslinking effect, in contrast to the huge crosslinking observed for the WCL-infused nanocomposites. Hence, the GNP-alone reinforced nanocomposites appear to offer effective recycling potential over those of WCL-infused nanocomposites, which is highly desirable for sustainable industrial applications. Understandably, through detailed analysis undertaken in this investigation employing state-of-the-art techniques such as Raman spectroscopy and scanning electron microscopy (SEM), this work has provided in-depth knowledge on the interaction of GNP and WCL with the WPU matrix. As well as their effects on elastomeric nanocomposites fracture-mechanisms, and structure-property relationship, which are desirable for wide-scale industrial applications. • Unfunctionalised GNPs were successfully integrated in WPU matrix, with and without a crosslinker, with uniform dispersion • Both GNP and WCL increase the strength and modulus of WPU by comparable levels • WCL integration contributed to reduction in elongation, but GNP does not • WCL and GNP together increase the strength beyond each individually • GNP provides mechanical enhancement without crosslinking the WPU, hence, can be recycled more easily than crosslinked WPU
Read moreBis-prodrug cryopreserved lipid nanoparticles with enzymatically triggered release.
Lipid nanoparticle (LNP) formulations have emerged as a versatile platform for the delivery of therapeutics. However, achieving long-term stability and effective delivery of water-soluble small molecule drugs remains a challenge. In this study, we demonstrate a cryopreservable LNP formulation incorporating a hydrophobically modified bis-prodrug of lamivudine. By systematically varying the surfactant composition by combining a PEGylated surfactant (Brij S20) with an unPEGylated, zwitterionic lipid (Lipoid S100), we identify formulations that maintain colloidal stability following freeze-drying and redispersion in the presence of 10% w/v sucrose. Particle size measurements before and after lyophilisation indicate that surfactant ratio significantly impacts redispersibility, with 50/50 Brij/lipoid compositions offering the best performance. A core composition comprising the prodrug and tricaprin at either 1 : 1 or 3 : 1 ratio was evaluated, with the 3 : 1 formulation achieving redispersed particle sizes below 150 nm and low polydispersity. Enzymatic studies using porcine liver esterase confirm slow, sustained conversion of the bis-prodrug to active lamivudine over up to 9 weeks. This work highlights the opportunity of a prodrug-based strategy to formulate water-soluble APIs into stable, freeze-dried LNPs, enabling controlled, enzyme-responsive release. These findings offer insight into how surfactant composition influences freeze-drying compatibility and provide a platform for the development of LNP systems for small molecule delivery.
Read moremicrostructureFoam: A phase-field framework for thermofluid dynamics and microstructural evolution