- Research Article
1
- 10.1021/acs.estlett.5c00642
Comment on “Scientists’ Statement on the Chemical Definition of PFASs”
- Oct 20, 2025
- Environmental Science & Technology Letters
- Timothy J Wallington + 11 more +11
International audience
Publications from 2021 to 2026
Showing 10 of 216 papers
Comment on “Scientists’ Statement on the Chemical Definition of PFASs”
International audience
Towards the Direct Observation of the Local and Electronic Structure Evolution of Positive Electrode Materials by X-Ray Raman Scattering and X-Ray Emission Spectroscopy
The emergence of high brilliance synchrotron sources and the availability of more sophisticated infrastructure have opened doors to advanced material characterization, enabling a profound understanding of new processes and mechanisms in battery research. [1] More specifically, non-resonant Valence-to-Core X-ray emission spectroscopy (VtC-XES) and X-ray Raman scattering (XRS) stand out as complementary photon-in/photon-out X-ray spectroscopy techniques. The unique capability of these techniques lies in their access to soft X-ray edges using a hard X-ray beam, providing comprehensive information on both the electronic and local structure, due to their high sensitivity to local structure and coordination. [2,3] In this work, two different families of materials with different compositions and crystal structures are studied using XES and XRS.The first part focuses on the detailed study of oxygen substituted KVPO4F1-xOx (x = 0, 0.25, 0.5, 0.75, 1) using VtC-XES combined to ab initio theoretical calculations. The average working potential increases with increasing oxygen content by activating the V3+/4+ and V4+/5+ redox couples and replacing the VO4F2 “ionic” entity by {V=O}O5 unit with a highly “covalent” vanadyl-type bond. [4] VtC-XES allowed us to distinguish the contributions of V-F, V-O, and V=O bonds in the local environment, with spectral intensities highly correlated to the F- and O2- anionic composition. In addition, specific spectral evolutions are also associated to the presence of highly covalent V=O bonds, strongly influencing the electrode potential of the material.The second part examines a series of electrochemically obtained LiyNiO2 layered oxide materials (y = 0.02, 0.25, 0.33, 0.5, 0.67, 1.0). VtC-XES performed at the Ni Kβ emission line allows to study the local structure evolution around Ni, whereas XRS spectroscopy at both the O K-edge and Ni L2,3 L-edges gives an access to the interplay between Ni and O through the hybridized states of Ni 3d and O 2p. [5] This work provides a survey on both the cationic and anionic redox processes, and unveils the underlying phenomena related to the charge compensation processes occurring in this material.Overall, we present a comprehensive study of different polyanionic and layered oxide positive electrode materials using complementary X-ray spectroscopic techniques to probe both the local and electronic structures. We demonstrate that they allow to follow and understand evolution and changes in the local structure in materials of intricate crystal structures.AcknowledgementThis work was supported by the DESTINY Marie Skłodowska-Curie Actions COFUND PhD Programme (Grant Agreement #945357) co-funded by the European Union's Horizon2020 research and innovation program and the Synchrotron SOLEIL. ANR is also acknowledged for funding the RS2E network through the STORE-EX Labex Project ANR-10-LABX-76-01. Alistore-ERI network is also acknowledged.
Read moreRoom Temperature Efficient Regeneration of Spent LiFePO4 by Direct Chemical Lithiation
The exponential production of lithium-ion batteries for electric vehicles (EVs) and electronic applications leads to the creation of a huge stock of batteries at the end of life. Considering the current economic, geopolitical and environmental context, the recycling of these spent batteries is becoming an urgent need in order to mitigate environmental pollution and limit the waste of valuable and critical resources1.In this work, we report a rewarding direct recycling process of spent LiFePO4 cathode material by direct chemical lithiation in solution2. After safe opening of the spent commercial battery, a structural, morphological, spectroscopic and electrochemical characterization of the spent LFP cathode was carried out to identify the reason(s) of battery failure. The results obtained by XRD (Fig 1a) and Mössbauer spectroscopy (Fig 1b) show that the loss of lithium in the cathode (up to 50%) consumed during formation and growth of the SEI during cycling, is the major reason of the end of life of these batteries, in total agreement with the literature3.To address the lithium shortage problem, a recycling process via direct chemical lithiation in organic solution at room temperature of the LFP cathode has been implemented. Lithium iodide (LiI) dissolved in several solvents such as acetonitrile, cyclohexane, ethanol, DMSO, methanol and propan-1,2-diol was used as both the reductant and the lithiation agent. The best results were obtained with the cathode regenerated in ethanol, which is also the most captivating and environmentally friendly solvent. The different characterizations of this regenerated cathode allow evaluating the efficiency of the regeneration process. Mössbauer spectroscopy (Fig. 2a) confirms the total reduction of FeIIIPO4 to LiFeIIPO4, while electrochemical characterization (Fig. 2b) shows encouraging properties with a reversible capacity of ~168 mAh/g for the regenerated LFP.
Read moreMetal-Free Decarboxylative Allylation of Oxime Esters under Light Irradiation.
Allylation reactions, often used as a key step for constructing complex molecules and drug candidates, typically rely on transition-metal (TM) catalysts. Even though TM-free radical allylations have been developed using allyl-stannanes, -sulfides, -silanes or -sulfones, much less procedures have been reported using simple and commercially available allyl halides, that are used for the preparation of the before-mentioned allyl derivatives. Here, we present a straightforward photocatalytic protocol for the decarboxylative allylation of oxime esters using allyl bromide derivatives under metal-free and mild conditions. This methodology yields a diverse variety of functionalized molecules including several pharmaceutically relevant molecules.
Read moreSelf-pillared pentasil zeolites: adjusting the thickness of nanosheets through a simple and direct dual templating approach
A one-step synthesis method allows tuning the silicalite nanosheets’ thickness from 2 to 30 nm in self-pillared zeolites. The adjustement is achieved by mixing two simple organic structure-directing agents (OSDAs): tetrapropylammonium (TPA) and tetrabutylammonium (TBA). The proportion of incorporated TBA, known to favour silicalite nanosheets, determines the morphological variations observed.
Read morePhosphorus acid: an asset for flame-retardant sustainable vitrimers
Three biobased epoxy resins from vanillic alcohol, linseed oil and cardanol were crosslinked with phosphoric acid to prepare vitrimers.
Read moreEasily deposited ZnO nanorods on siloxene nanosheets: investigation of morphological, dielectric, ferroelectric, and energy storage properties.
The integration of metal oxides onto two-dimensional layered siloxene has proven to be an effective strategy for expanding potential applications across diverse fields. Herein, we present the synthesis and detailed characterization of zinc oxide (ZnO) nanorods deposited on siloxene nanosheets using the wet chemical precipitation method without the need of alkali. The presence of ZnO nanorods was confirmed through electron microscopy analyses. X-ray diffraction analysis further verified the presence of characteristic peaks of ZnO in the hexagonal wurtzite crystal structure. Dielectric measurements demonstrated the moderated stability of interfacial polarization in siloxene nanosheets doped with zinc oxide (SX-ZnO) over a broad frequency spectrum, coupled with minimal electrical loss values under 0.4 within the 100 Hz to 1 MHz frequency range. In addition, the ferroelectric study of SiNSs-ZnO composites revealed a slim hysteresis loop with maximum polarization and remnant polarization values that varied with reaction times. The SX-ZnO sample prepared for 5 h exhibited the best stored energy properties, featuring a moderate stored energy density (Ws = 771.94 mJ cm-3) and a high energy efficiency of 83.38%. This investigation underscores that the modification of siloxene layers through the deposition of nanostructured transition metal oxide materials leads to stabilized interfacial polarization and enhanced efficient energy storage.
Read moreCold-sintering and Li doped ZnO sintering aid for the densification of BaZr0.7Ce0.2Y0.1O3-δ proton conducting ceramics
Sorption of water and ethanol pure vapours and vapour mixtures by four hardwoods
Enantioselective Aldol Reaction with Difluoroenoxysilanes Catalyzed by Cationic Palladium Aqua Complexes
Abstract The enantioselective addition of difluoroenoxysilanes to aromatic aldehydes, catalyzed by cationic palladium aqua complexes, has been described. The reaction is operationally simple, does not require anhydrous conditions and performs at room temperature. The palladium catalysts, previously discovered and reported by Sodeoka, are easily prepared in two steps from PdCl2(MeCN)2. The aldol compounds were obtained in good yields and with enantiomeric ratios up to 93 : 7, the reaction being more efficient using electron‐rich aldehydes.
Read more