- Research Article
- 10.1007/s13571-026-00398-y
Fertility Transition in India, 1985–2020: Selection of the Aggregation Function Matters
- Mar 25, 2026
- Sankhya B
- Aalok Ranjan Chaurasia + 1 more +1
Publications from 2021 to 2026
Showing 10 of 635 papers
Fertility Transition in India, 1985–2020: Selection of the Aggregation Function Matters
Silica- and Garcinia mangostana Fruit Peel Extract-Modified SuperparamagneticParticles for EfficientDNA Isolation
Three types of superparamagnetic iron oxide particles(SPIOPs)were employed for the efficient isolation of salmon sperm DNA, includingpristine SPIOP, silica-functionalized SPIOP (SPIOP@SiO2), and SPIOP modified with xanthones extracted from the fruit peelof Garcinia mangostana (SPIOP@XAN).The SPIOP@XAN variants were synthesized with different xanthone loadings(2.5, 5, 10, 20, and 25 g). Structural and physicochemical characterizationof the synthesized particles was conducted using dynamic light scattering(DLS), vibrating sample magnetometry (VSM), field emission scanningelectron microscope (FESEM), X-ray diffraction (XRD), Fourier-transforminfrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS),confirmed the crystalline nature and successful modification of theparticles. Among the materials tested, SPIOP@XAN with 10 wt % xanthone(SPIOP@X10/W90) exhibited the highest salmon sperm DNA adsorptionefficiency at 30 min, achieving over 93%. The adsorption of salmonsperm DNA onto SPIOP followed the Langmuir isotherm model, with amaximum adsorption capacity of 228.8 mg·g–1, and conformed to pseudo-first-order kinetics, indicating a monolayeradsorption mechanism. In contrast, SPIOP@X10/W90 exhibited the bestfit to the Freundlich and Redlich–Peterson isotherms, witha maximum adsorption capacity of 198.2 mg·g–1, and followed pseudo-second-order kinetics, suggesting a more complexand heterogeneous adsorption process. In similar vien, SPIOP@SiO2 was best described by the Freundlich and Redlich–Petersonisotherms, showing a maximum adsorption capacity of 38.0 mg·g–1, and conformed to pseudo-first-order kinetics, implyingthat the adsorption was predominantly governed by physical interactions.These findings underscore the potential of SPIOP@X10/W90 for high-efficiencymagnetic DNA extraction and its applicability in future DNA biosensingtechnologies.
Read moreConstructing Hierarchical Metal–Organic Framework/Poly(m-phenylenediamine) Composites with Nanosheet Arrays via Phase Transition for Photothermal Catalysis
Considering the abundance and pollution-free nature of solar energy, it is necessary to design photothermal catalysts to obtain high-value chemicals driven by the endothermic catalytic reaction. Herein, PC-1/PmPD and PC-2/PmPD with hierarchical nanostructure assembled from nanosheet arrays are fabricated by phase transition from metastable precursor metal–organic frameworks (MOFs) under the stimulation of methanol and m-phenylenediamine (mPD). This phase transition involves dissolution-recrystallization and polymerization in one step, which not only completes precise morphology transformation but also attaches functional polymer in the composites. Owing to the photothermal effect and catalytic activity provided by the poly(m-phenylenediamine) (PmPD) and hierarchical nanostructures, such as abundant optical traps and more exposed active sites on the outer surface, PC-1/PmPD and PC-2/PmPD achieve efficient photothermal catalytic activity in the cycloaddition reaction of carbon dioxide driven by simulated sunlight at room temperature. The construction of hierarchical MOFs/polymer composites with nanosheet arrays as photothermal catalysts may open opportunities to expand their diversity and range of potential applications.
Read moreReaxFF ParameterSet for Boron Clusters and IcosahedralBoron Crystals: Comparison with Density Functional Theory and Machine-LearningPotentials
Icosahedral boron materials, which include regular icosahedraof12 boron atoms have gained increasing attention due to their potentialapplications as superhard materials, semiconductors, and energy storagemedia. However, the synthesis of high quality crystals of these materialshas been a major barrier to the development of these applications.To enable computational prediction of synthesis conditions yieldinghigh-quality icosahedral boron crystals, herein we tested and refineda set of ReaxFF parameters for the nucleation and growth of such crystals.We focused on matching the relative energies of small boron clustersobtained by density functional theory since such small clusters andsimilar motifs are likely present in crystal nuclei and at the interfaceof growing crystals. Using a training set of B80 clusters,including a low-energy core–shell structure containing a B12 icosahedron core and a high-energy single-shell structureproduced in preliminary ReaxFF simulations, the ReaxFF parameter setwas refined to better reproduce energies calculated by density functionaltheory (DFT). Among existing ReaxFF parameter sets and the machine-learninginteratomic potentials MACE-MP-0, MACE-MP-0b3, MACE-MPA-0, PFP v7.0.0,and SevenNet-MF-ompa, only our new parameter set and PFP v7.0.0 correctlyranked these B80 clusters. This refinement led to improvedagreement with DFT for a test set of 58 clusters consisting of 8–103boron atoms. Furthermore, our refined parameter set yielded greaterlocal icosahedral structure than the previously existing ReaxFF parameterset for larger scale simulations of crystallization from supercooledliquid boron. Additionally, simulations of solid boron in contactwith molten nickel using our refined ReaxFF parameters yielded a boronsolubility value that agrees moderately well with experimental expectations,while the previous boron parameters gave a value that was much toolow.
Read moreModeling Metal Electrocatalysts as Cathodes: The Urgent Need to Look Beneath the Surface
Optimizing Biomedical Image Compression Through Haar and Discrete Wavelet Transforms
Data may be compressed in two ways i.e. lossless or lossy. The lossless process has little possibility for huge compression of data while lossy one can pack enormous measure of information further developing the general pressure proportion with a decent quality factor. Wavelet transformation is broadly utilized in this field, especially Haar wavelet on account of its great attributes. Haar wavelet permits data to be encoded by the “levels of detail”. Discrete wavelet transformation comprises of deterioration of picture into detail coefficients & approximation. The available wavelet coefficients are threshold utilizing hard thresholding. The threshold image is dependent upon inverse discrete wavelet to acquire the restored image. In this paper, Haar wavelet as well as discrete wavelet transform is executed for compacting DICOM images. Different MR images are evaluated utilizing different parameters like MSE, PSNR, Average difference etc. It is found that Haar wavelet transform has possible application in compression however the use of Discrete wavelet is more productive for image compression in biomedical.
Read moreMultiple Sourcesof Riparian Wetland Suspended Solidsduring Episodic Rain Events: Influence on Uranium Transport
Suspended solids can be the primary vector for transportingcontaminantsin streams. The objective of this study was to determine whether changesin the properties of suspended solids during rain events impactedcontaminant transport. Stream water was collected during five episodicevents downstream from a U-contaminated wetland located in South Carolina,USA. The suspended particles were initially composed of Fe-flocs (particlesformed in situ prior to the rain event) that hadsignificantly greater Fe, Mn, organic-C, and U content than particlescollected later during a sampling rain event. XANES and EXAFS revealedthat U in the Fe-flocs was U(VI) and that it was not incorporatedin a mineral structure but existed as inner- or outer-sphere adsorbeduranyl species associated with organic matter and Fe-oxides. The uranylhad an extraordinarily high affinity for the suspended solids, withsolid to liquid U ratios of >72,000 (μg/kg)/(μg/L).Afterthe initial flush of Fe-flocs, a greater fraction of the suspendedsolids had lower organic-C, Fe, Mn, and amorphous phases and werecomposed of more quartz, kaolinite, and gibbsite, resulting in lowerU concentrations than those in the solids collected earlier in therain event. This study highlights the importance of understandingsuspended solids as transport vectors and their potential dynamicnature during rain events.
Read moreAnalysis and optimization of dynamic characteristics of mechanical vibration based on electro-mechanical analogy
To analyze and optimize the dynamic characteristics of a two degree of freedom mechanical vibration system, an equivalent analog circuit is established by using the impedance method of the electro-mechanical analogy. Firstly, the equivalent relationship between the mechanical vibration system and the electrical system is presented. Then, the vibration response of the mechanical vibration under different frequency excitations is calculated with the corresponding equivalent electrical system. Finally, with the goal of reducing the vibration amplitude, the parameter optimization of the mechanical vibration system is achieved. The result shows a broad application prospect of the electro-mechanical analogy in the analysis and optimization of the mechanical vibration system.
Read morePharmaceutical evaluation of cis-[co(trien)(4-CNP)(C₁₂H₂₅NH₂)]3+: A metallo-surfactant with DNA/tRNA affinity and broad-spectrum bioactivity
Biodegradable MXene-Alginate Composite: A Sustainable, Transparent, and Flexible Solution for Next-Generation Ultraviolet Shielding