Materials Research Science and Engineering Centers

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) is a versatile surface-sensitive technique for characterizing both hard and soft matter. Its chemical and molecular specificity, high spatial resolution, and superior sensitivity make it an ideal method for depth profiling polymeric systems, including those comprised of both inorganic and organic constituents (i.e., polymer nanocomposites, PNCs). To best utilize ToF-SIMS for characterizing PNCs, experimental conditions must be optimized to minimize challenges such as the matrix effect and charge accumulation. Toward that end, we have successfully used ToF-SIMS with a Xe+ focused ion beam to depth profile silica nanoparticles grafted with poly(methyl methacrylate) (PMMA-NP) in a poly(styrene-ran-acrylonitrile) matrix film by selecting conditions that address charge compensation and the primary incident beam angles. By tracking the sputtered Si+ species and fitting the resultant concentration profile, the diffusion coefficient of PMMA-NP was determined to be D = 2.4 × 10-14 cm2/s. This value of D lies between that measured using Rutherford backscattering spectrometry (6.4 × 10-14 cm2/s) and the value predicted by the Stokes-Einstein model (2.5 × 10-15 cm2/s). With carefully tuned experimental parameters, ToF-SIMS holds great potential for quantitatively characterizing the nanoparticles at the surfaces and interfaces within PNC materials as well as soft matter in general.

Reported here is the synthesis of perfectly sequence defined, monodisperse diblock copolypeptides of hydrophilic elastin-like and hydrophobic resilin-like polypeptide blocks and characterization of their self-assembly as a function of structural parameters by light scattering, cryo-TEM, and small-angle neutron scattering. A subset of these diblock copolypeptides exhibit lower critical solution temperature and upper critical solution temperature phase behavior and self-assemble into spherical or cylindrical micelles. Their morphologies are dictated by their chain length, degree of hydrophilicity, and hydrophilic weight fraction of the ELP block. We find that (1) independent of the length of the corona-forming ELP block there is a minimum threshold in the length of the RLP block below which self-assembly does not occur, but that once that threshold is crossed, (2) the RLP block length is a unique molecular parameter to independently tune self-assembly and (3) increasing the hydrophobicity of the corona-forming ELP drives a transition from spherical to cylindrical morphology. Unlike the self-assembly of purely ELP-based block copolymers, the self-assembly of RLP-ELPs can be understood by simple principles of polymer physics relating hydrophilic weight fraction and polymer-polymer and polymer-solvent interactions to micellar morphology, which is important as it provides a route for the de novo design of desired nanoscale morphologies from first principles.

A dynamically adjustable colloidal assembly technique is presented, which combines magnetic and acoustic fields to produce a wide range of colloidal structures, ranging from discrete colloidal molecules, to polymer networks and crystals. The structures can be stabilized and dried, making them suitable for the fabrication of advanced materials.

We present a particle-based method for the immunospecific capture and confinement of cells using acoustic radiation forces. Ultrasonic standing waves in microfluidic systems have previously been used for the continuous focusing of cells in rapid screening and sorting applications. In aqueous fluids, cells typically exhibit positive acoustic contrast and are thus forced toward the pressure nodes of a standing wave. Conversely, elastomeric particles exhibit negative acoustic contrast and travel toward the pressure antinodes. We have developed a class of elastomeric particles that are synthesized in bulk using a simple nucleation and growth process, providing precise control over their size and functional properties. We demonstrate that the biofunctionalization of these particles can allow the capture and transport of cells to the pressure antinodes solely via acoustic radiation forces, which may enable new acoustics-based cell handling techniques such as the washing, labeling, and sorting of cells with minimal preparatory steps.

The effect of thermal annealing on leakage current and dielectric breakdown in self-assembled nanodielectric (SAND) metal−insulator−semiconductor (MIS) devices is investigated. Annealing at temperatures of ≥300 °C for 120 s in a reducing atmosphere significantly reduces the leakage current density at typical operating voltages (Vg = 3 V) while greatly narrowing the distribution of breakdown voltages. The threshold breakdown voltage is characterized by a Weibull distribution of slope β ≈ 4.5 prior to thermal annealing, and by β ≥ 12 post annealing. A comparison of the breakdown characteristics of conventional inorganic dielectrics with those of SAND demonstrates that self-assembly is a viable approach to fabricating highly reliable dielectric materials for unconventional electronics.