- Research Article
8
- 10.1016/j.cageo.2022.105187
Preliminary geological mapping with convolution neural network using statistical data augmentation on a 3D model
- Aug 04, 2022
- Computers & Geosciences
- Matthieu Cedou + 5 more +5
Publications from 2021 to 2026
Showing 10 of 11 papers
Preliminary geological mapping with convolution neural network using statistical data augmentation on a 3D model
Multiple, Coeval Silicic Magma Storage Domains Beneath the Laguna Del Maule Volcanic Field Inferred From Gravity Investigations
Abstract The rhyolite‐producing Laguna del Maule volcanic field (LdMVF), Chile, has had numerous post‐glacial eruptions that produced large explosions and voluminous lava flows. During the Holocene ∼60 m of surface uplift is recorded by paleo‐shorelines of the fresh‐water Laguna del Maule, with an inflation source near the Barrancas volcanic complex. Rhyolites from the Barrancas complex erupted over ∼14 ka including some of the youngest (1.4 ± 0.6 ka) lava flows in the field. New gravity data collected on the Barrancas complex reveals a residual gravity low (−6 mGal, “Barrancas anomaly”) that is distinct from the pronounced gravity low (−19 mGal; “Lake anomaly”) associated with present‐day ground uplift to the northwest. Three‐dimensional inversion of the Barrancas anomaly indicates the presence of a magma body with a maximum density contrast with the host rock of −250 kg/m 3 centered at a depth of ∼3 km below surface. Nearby Miocene high‐silica granites represent frozen remnants of highly evolved rhyolitic magma. Comparison of the densities measured from samples of these plutons with the geophysical model densities, and integration of thermodynamic modeling of silicic melt evolution, provide constraints on our interpretation. We propose a magma body, containing <30% melt phase and low volatile content, exists beneath Barrancas. The Barrancas and Lake gravity lows represent magma in different physical states, associated with past and present‐day storage beneath LdMVF. The gravity model mirrors geochemical observations which independently indicate that at least two distinct rhyolites were generated and stored as discrete magma bodies within the broader LdMVF.
Read moreResearch Note: A proposed procedure for ameliorating edge effects in magnetic data transformations
ABSTRACTReduction to pole and other transformations of total field magnetic intensity data are often challenging to perform at low magnetic latitudes, when remanent magnetization exists, and when large topographic relief exists. Several studies have suggested the use of inversion‐based equivalent source methods for performing such transformations under those complicating factors. However, there has been little assessment of the importance of erroneous edge effects that occur when fundamental assumptions underlying the transformation procedures are broken. In this work we propose a transformation procedure that utilizes magnetization vector inversion, inversion‐based regional field separation and equivalent source inversion on unstructured meshes. We investigated whether edge effects in transformations could be reduced by performing a regional separation procedure prior to equivalent source inversion. We applied our proposed procedure to the transformation of total field magnetic intensity to all three Cartesian magnetic field components using a complicated synthetic example based on a real geological scenario from mineral exploration. While the procedure performed acceptably on this test example, the results could be improved. We pose many questions regarding the various choices and control parameters used throughout the procedure, but we leave the investigation of those questions to future work.
Read moreCombined potential field and airborne electromagnetic interpretation to unravel the geological history of the Curaca Valley Region, Bahia, Brazil
Integrated geological-geophysical interpretation offers a robust way to answer geoscientific questions by providing better and faster decisions on where to explore in a regional context, and ultima...
Read moreAutomated, real-time geohazard assessment in deep underground mines
We introduce an automated, real-time geohazard assessment system designed specifically for underground mining. The system, which we call Geoscience INTEGRATOR, is based on the quantitative 4D geohazard computational strategy that we previously developed and reported on at the Seventh International Conference on Deep and High Stress Mining in Sudbury, Canada, in September 2014. The computational strategy relies on modelling multiple, independent hazard criteria related to geology, structure, rock mass condition, stress, seismicity, mine geometry, and support on the rock interface where the hazards occur, and building a statistical model that relates past hazard occurrence to the state of those criteria at the time of the hazard (McGaughey 2014). Further research and development has been carried out since then with the objective of developing an operational computational infrastructure that enables practical geohazard assessment using this approach. We have developed a system for automatically assembling and managing the required inputs, managing the geohazard assessment computational processes, and providing meaningful reports to mine operators. This has been accomplished within three recent Canadian research programs managed by the Centre for Excellence in Mining Innovation (CEMI): ‘Smart Underground Monitoring and Integrated Technologies’ (SUMIT), ‘Mining Observatory Data Control Centre’ (MODCC), and ‘Ultra-Deep Mining Network’ (UDMN). The initial system design objective under the SUMIT program was a capability to “provide researchers with user-friendly access to mine datasets and their contextual information to facilitate and optimise research efforts.” The system was further developed in the ensuing projects to provide a powerful 3D visualisation interface and to support, track, and automatically report on 4D dynamic mine models and associated geohazards in a deep operating mine context. It is now being deployed to manage multi-institution, multi-site data from both SUMIT and other major research projects in addition to implementations at operating mine sites to improve rockburst and other types of geotechnical hazard assessment. Keywords: geohazard, rockburst, seismicity, machine learning, data management
Read moreRapid 3D inversion of airborne TEM data from Forrestania, Western Australia
SUMMARY VPem3D performs 3D inversion on time-integrated (resistive limit) data. Conversion to resistive limits delivers a massive increase in speed since the TEM inverse problem reduces to a quasi-magnetic problem. The time evolution of the decay is lost during the conversion, but the information can be largely recovered by constructing a starting model from CDIs or 1D inversions. We have carried out preliminary inversion of VTEM dBz/dt data from the Forrestania EM test range. The inversion places a weak conductor at a depth and location consistent with the known target. Run time is a few minutes, a fraction of that required by a full 3D EM inversion.
Read moreNext generation 3D geological and geophysical modelling, west Tasmania
Airborne magnetic and ground gravity data have been inverted to recover 3D distributions of magnetic susceptibility and density over an area (40 km x 35 km) in western Tasmania. Building on previous modelling and structural interpretation, the overall modelling strategy focused initially on the most magnetic units (Cambrian ultramafics), which are regionally associated with major tectonic features. Interpretation of their geometry via iterative 3D magnetic inversion and geometry adjustment thus outlines a structural framework capable of satisfying geologic and magnetic and gravity observations. Significant slabs of ultramafic material are demonstrated to underlie a considerable portion of the area, agreeing with previous 2D forward model investigations. This framework is effectively filled in with other major geological elements, including extensive low-density Devonian granites and magnetic Cambrian granites, such that geologic, magnetic and gravity constraints are all grossly satisfied. Magnetic and gravity residuals present at the conclusion of the modelling process are thus interpreted to indicate features such as alteration systems that are geologically as well as geophysically anomalous, and hence of exploration interest.
Read moreIncorporating geologic structure into the inversion of magnetic data
SUMMARY Magnetic field inversions are non-unique but a realistic goal is to find a causative earth structure that is compatible with the geophysical data, the petrophysical constraints, and with geology. Invariably the inversion results are improved as the number and diversity of constraints are increased. In this paper we concentrate upon the inclusion of geologic structural information. Geologic structural modelling programs can import faults, boundaries, and strike and dips of geologic units and interpolate this sparse information in space. When provided with a 3D voxel mesh, they can compute a strike, dip, and plunge for each cell. Following previous work, structural geologic information is incorporated into the inversion as a weak constraint by encapsulating it into the model objective function. The model objective function is formed such that each prism has its own set of rotated vectors to enforce smoothness along the direction of the geology. User-controlled parameters specify the degree of smoothness throughout the 3D volume and thus allow additional geologic insight to be directly incorporated. In addition to structural geology, the inversion algorithm utilizes reference models and bound constraints that help us realize our goal of incorporating all available information. The efficacy of the inversion is demonstrated through a synthetic and a field example.
Read moreRock mass response to deep mining induced stress—research and tools development at the CEMI, Canada
Mining deeper is needed in order to sustain production in many established camps worldwide, but this comes with elevated risk due to, among other things, high stresses. In these conditions, the interactions between stress and structure become critical, as does the state of the rock mass itself and how it’s impacted by the process of mining. Research leading to optimised mine designs and an improved geomechanics outcome is needed. Specifically, rock mass system stiffness and its effect on the stability of structures, the performance of our ground support, and thereby the vulnerability of our excavations is critical to consider, but is not easily measured or understood. This is despite its fundamental importance. At a strategic level, work needs to focus on an integrated approach comprised of enhanced early site characterisation techniques/procedures coupled with rock mass behaviour monitoring in response to the mining process itself. Recognition of the inherently dynamic, rather than static, conditions which prevail in deep mines is essential to ensuring that strategic goals are met through employment of appropriate tactics. This paper will discuss the difficulties and hazards associated with unpredictable rock mass behaviour in deep mines and examine in some detail various tactical research and tool development approaches being undertaken to lower the risk associated with them.
Read moreBasement Reservoirs – A Review of their Geological and Production Characteristics
This presentation describes the geological characteristics, technical issues and development challenges associated with hydrocarbon exploitation in crystalline basement formations. The term ‘basement’ here refers to crystalline formations ranging from intrusive and extrusive magmatic bodies (especially granites) to the family of low to medium grade metamorphic rocks.
Read more