- Research Article
- 10.1016/j.fuel.2026.138510
Flame transition and detonation overpressure distribution of H2-O2 mixtures with different equivalence ratios in vessel-pipe geometry
- Jul 01, 2026
- Fuel
- Chunji Zhuang + 6 more +6
Publications from 2021 to 2026
Showing 10 of 5,737 papers
Flame transition and detonation overpressure distribution of H2-O2 mixtures with different equivalence ratios in vessel-pipe geometry
Shear capacity evaluation and buckling mechanisms of composite I-girders with corrugated steel webs
Sustainable recycling technologies for lithium-ion battery cathode materials: Recent progress
With the widespread deployment and extensive utilization of lithium-ion batteries (LIBs) across various sectors, battery recycling has emerged as a critical concern for sustainable development. As the most valuable and resource-intensive component of LIBs, cathode materials play a central role in enabling resource conservation, reducing the ecological footprint and reinforcing environmental protection. This review summarizes recent advances in recycling technologies for LIB cathode materials, with particular emphasis on green and sustainable process design. Optimization strategies for conventional hydrometallurgical and pyrometallurgical routes are first discussed, highlighting efforts to lower energy consumption, chemical usage, and environmental emissions. Emerging direct regeneration and closed-loop recycling approaches are then reviewed, demonstrating their potential to preserve crystal structures, improve material reuse efficiency, and reduce overall processing intensity. Through comparative analysis, key challenges such as high energy demand, complex processing steps, and performance variability of recycled products are identified. Finally, future research directions are outlined, focusing on environmentally benign recycling chemistries, process integration, life-cycle-oriented evaluation, and high-value utilization of recycled cathode materials. These insights aim to guide the development of greener and more sustainable battery recycling technologies. • SLIBs exhibit remarkable value-added potential in the circular economy. • The recovery efficiencies of hydrometallurgy, pyrometallurgy, and direct regeneration are systematically compared. • Green reagents and closed-loop systems contribute to the sustainable development in cathode material recovery.
Read moreResearch on thermal runaway characteristics of 18,650 lithium-ion battery and its flame resistance mechanism
Molecular mechanisms of fatty acids influence on bio-imprinted Rhizomucor miehei lipase towards 1,3-dioleoyl-2-palmitoyl glycerol synthesis
Tailoring transport resistance of gradient-porosity SiC membranes with superior permeance for high-temperature particulate separation
3D interrupted in-situ X-ray tomography study on the role of TiB2 in densification during hot-pressing sintering of aluminum matrix composites
Methylated 2D RUB-18 Nanosheet constructs quasi-continuous molecular sieving channels for H2 purification
High-performance regenerated cellulose membranes enabled by multiscale structural tuning through ternary NMMO solvent engineering and pore-forming additives
PFM-PWM Dual-Mode Control Strategy for <i>LLC</i> Resonant Ion Pump Power Supplies Under Ultralight Load Conditions
Ion pumps operate under drastically varying load conditions, where maintaining stable high-voltage output during the extremely light-load stage (ultra-high vacuum maintenance) is particularly challenging for conventional resonant converters due to frequency runaway and gain nonlinearity. To address this, a hybrid PFM-PWM control strategy is proposed to ensure precise regulation and robust stability across the entire wide load range. The proposed method employs Pulse Frequency Modulation (PFM) with a fixed conduction time under heavy loads to ensure sufficient energy delivery, and seamlessly transitions to Pulse Width Modulation (PWM) under light-load conditions. This dual-mode approach effectively eliminates the voltage drift and instability issues inherent to traditional PFM at light loads, enabling smooth, monotonic regulation down to near-open-circuit conditions. Experimental validation on a digitally controlled 7 kV, 200 W prototype demonstrates superior performance across the complete operational spectrum. The system achieves a stable 7 kV constant voltage output even under complete open-circuit conditions, maintains rated Voltage-Current (UI) curve characteristics through constant current (100 mA), constant power (200 W), and constant voltage (7 kV) regions, and exhibits excellent dynamic response during load step transitions. Arcing simulation tests confirm robust operation under periodic short-circuit conditions with 110 ms cycles, while actual ion pump driving experiments validate reliable vacuum pumping performance from initial pump-down through ultra-high vacuum maintenance, with small and large ion pumps requiring 6.7 and 16 minutes, respectively, to complete the pumping process.
Read more