Use of Fly Ash and Bottom Ash in Lieu of Natural River Sand in Pavement Quality Concrete Dosed with a New Generation Superplasticizer (Master FlyAsh)
Abstract This study was aimed at exploring the possibility of utilizing fly ash (FA) and bottom ash (BA) as fine aggregates in pavement quality concrete (PQC), in the presence of a fast-acting new generation superplasticizer (NG-SP) procured from Aaradhya Chemicals, Nagpur. Multiple mix designs were carried out but only three trial mixes containing varying proportions of FA and/or BA are presented here for the sake of brevity. Upon obtaining the desired flowability, the physio-mechanical characteristics of the batches were evaluated in terms of compressive strength, flexural strength, split tensile strength, water absorption and abrasion resistance. Durability studies were also conducted to assess the long-term behavior of the pavement. The samples containing 100% FA as exhibited superior performance as compared to the other mixes. Overall, both Trial 1 (100% FA) and Trial 2 (50% FA + 50% BA) exhibited acceptable strength properties as per the codal requirements of IRC 15: 2011 for PQC, with a 28-day compressive strength of 50.92 N/mm2 and 49.76 N/mm2 respectively. The samples of Trial 3 (100% BA), however, failed to meet the necessary codal requirements for PQC, enabling us to conclude that complete replacement of river sand in concrete pavements with either 100% FA or a combination of FA and BA in equal proportion is an eco-friendly and cost-effective alternative to the traditional mix design approach. Post lab evaluation, a 50 m3 site trial was undertaken at NTPC Khargone and was found to be satisfactory.KeywordsFly ashBottom ashNew generation SPSand replacementHVA concrete
Read more