- Research Article
1
- 10.1017/s1431927622001933
New Insights in Materials Characterization – Spectral Computed Tomography
- Aug 01, 2022
- Microscopy and Microanalysis
- Wesley De Boever + 3 more +3
Publications from 2021 to 2026
Showing 10 of 17 papers
New Insights in Materials Characterization – Spectral Computed Tomography
In situ dynamic X-ray micro-CT for additive manufactured parts
An abstract is not available for this content so a preview has been provided. As you have access to this content, a full PDF is available via the ‘Save PDF’ action button.
Read moreDynamic X-ray micro-CT insights of the recovery of ore bodies in presence of clay
An abstract is not available for this content so a preview has been provided. As you have access to this content, a full PDF is available via the ‘Save PDF’ action button.
Read moreИнтегрированная модель как инструмент решения практических задач при разработке газоконденсатных месторождений
Digital Twin for Downhole Pressure Gauges: Model and Field Case Study (Russian)
MicroCT assessment of bone microarchitecture in implant sites reconstructed with autogenous and xenogenous grafts: a pilot study.
To assess bone microarchitecture in maxillary sites grafted with autogenous or xenogenous grafts as well as to demonstrate the usefulness of microCT in dental implant research. Samples (n=12) consisting of titanium fixation screws covered by at least 0.5-1mm of human bone were obtained from 17 sites grafted with autogenous or xenogenous materials and prepared for microCT scanning and conventional histology. Bone histomorphometric parameters were evaluated in three distinct regions (graft region, transitional region, and native bone region). Three-dimensional (3D) bone-to-implant contact (BIC) calculation was performed using microCT data. Histological sections were used to calculate two-dimensional (2D) BIC percentages, which were compared with values obtained from 2D microCT images. Histomorphometric parameters varied according to the type of graft used, but sites reconstructed with autogenous bone showed higher mean values in general. In autograft samples, indices for parameters such as Tb.Th and Tb.Sp were significantly different when the native bone region was compared to the graft region. While a higher mean 3D BIC was found in the native bone region for both graft materials, significant BIC differences were absent when graft types were compared. The 2D BIC percentages obtained from histological and microCT images were similar. Autografts outperformed the xenogenous material used in this study concerning the histomorphometric parameters assessed. While graft type did not seem to influence 3D BIC, the native bone region showed the highest BIC percentages when compared to the other regions in both graft groups. In addition, 2D BIC ratios were similar regardless of graft material or image source (histological sections x microCT slices). Taken together, our findings suggest that microCT is an effective tool for 2D and 3D histomorphometric and BIC assessments in dental implant research.
Read moreStandardized MR terminology and reporting of implants and devices as recommended by the American College of Radiology Subcommittee on MR Safety.
Considerable confusion exists among the magnetic resonance (MR) imaging user community as to how to determine whether a patient with a metal implanted device can be safely imaged in an MR imaging unit. Although there has been progress by the device manufacturers in specifying device behavior in a magnetic field, and some MR imaging manufacturers provide maps of the "spatial gradients," there remains significant confusion because of the lack of standardized terminology and reporting guidelines. The American College of Radiology, through its Subcommittee on MR Safety, has proposed standardized terminology that will contribute to greater safety and understanding for screening metal implants and/or devices prior to MR imaging.
Read moreFeatures of Studing Oil and Gas Fields to the Full-Scale Development in Comlete Autonomy by Analogy Tagulskoe Fields
Abstract CJSC "ROSPAN INTERNATIONAL", a subsidiary of OAO "NK" Rosneft ", is currently engaged in the preparation for full-scale development of oil fields in Yamal and the north of the Krasnoyarsk Territory. One of these fields – Tagulskoye, located in the north of the Krasnoyarsk Territory. Infrastructure and road network in the area of the field is absent. Transportation of goods is carried out on the winter road in the summer – water and helicopter transport. Developed by the near field – Vankorskoye, located 45 km to the north. Active research field began in 2009 with the implementation of the pilot area number 1 (section pilot development). In 2009–2010, drilled five wells, including four with horizontal shaft. Conducted in 2010–2013 set of studies aimed at reducing the geological, technological risks, optimize system design to improve the reliability of the forecast of technical and economic indicators. The article summarizes the main results of pilot projects, analyze their performance. A comparison of predicted and actual characteristics of reservoirs, mining potential wells. The approach to preparing the fields to infrastructure constraints.
Read moreEOR Methods Applicability Analysis for Heavy Oil Reservoirs under Polar Circle Conditions
Abstract The current work is focused on definition of development strategies applicability for Russkoe heavy oilfield located above Polar Circle. For this authors collected the world-wide experience of heavy oilfield development approaches supplied with permafrost zones and systemed the results obtained on Russkoe oilfield. Series of investigations result in the fact that there is no an exact analog for Russkoe oilfield. However analog oilfields can be assumed for separated zones of Russkoe oilfield. Russkoe oilfield is characterized by a unique combination of factors having a critical influence on the choice of EOR methods. High oil viscosity, multiple faults within a formation, extensive water-oil and gas-oil saturated zones, great thickness and vertical heterogeneity of target layers, permafrost (to 500 m depth), low reservoir temperature, poor cemented sandstone rocks. Authors investigated world heavy oilfields, systemed its experience, compared geology for analogs, formed statistics of the effectiveness of EOR methods applicability. Several regions of heavy oilfields were defined. First of all it is heavy oilfields with permafrost located in Canada, China, USA and Russia, in the second turn it is non-permafrost zone heavy oilfields located in Venezuela, central part of the USA and Kazakhstan. As a result world experience of heavy oilfield development is summarized, geological particularities are compared, the applicability of methods projected on Russkoe oilfield.
Read moreUncoupling of bone formation with resorption in osteoarthritis subchondral bone in postmenopausal women—Associated with osteocyte dysfunction?