- Research Article
- 10.1016/j.jpi.2025.100448
Deep learning predicts the effect of neoadjuvant chemotherapy for patients with triple negative breast cancer
- May 14, 2025
- Journal of Pathology Informatics
- B Sturm + 4 more +4
Publications from 2021 to 2026
Showing 10 of 91 papers
Deep learning predicts the effect of neoadjuvant chemotherapy for patients with triple negative breast cancer
Mid-Band Propagation Measurements in Industrial Environments
6G radio access architecture is envisioned to contain a network of short-range in-X subnetworks with enhanced capabilities to provide efficient and reliable wireless connectivity. Short-range communications in industrial environments are actively researched at the so-called mid-bands or FR3, e.g., in the EU SNS JU 6G-SHINE project. In this paper, we analyze omnidirectional radio channel measurements at 10-12 GHz frequency band to estimate large-scale channel characteristics including power-delay profile, delay spread, K-factor, and pathloss for 254 radio links measured in the Industrial Production Lab at Aalborg University, Denmark. Moreover, we perform a comparison of estimated parameters with those of the 3GPP Indoor Factory channel model.
Read moreExperimental Analysis of Channel Frequency, Space, and Object Consistency at the W-Band
Subterahertz (sub-THz) frequencies provide huge untapped bandwidth for high data rates in wireless communications and high-precision sensing applications. Understanding radio channel characteristics at sub-THz frequency bands is important to identify potential applications. This letter investigated the frequency dependence, spatial consistency, and impact of blockage at the W-band. Employing the vector-network-analyzer-based virtual antenna array channel sounder, several wideband measurements covering three frequency bands, eight spatial locations, with or without the blockage at the W-band were performed. The experimental analysis demonstrated that channel characteristics have good frequency consistency and a strong correlation with the spatial environment. The above research is of great significance for achieving fast beam alignment and channel prediction in different spatial locations.
Read moreD2D Assisted Multi-Antenna Coded Caching
A device-to-device (D2D) aided multi-antenna coded caching scheme is proposed to improve the average delivery rate and reduce the downlink (DL) beamforming complexity. Novel beamforming and resource allocation schemes are proposed where local data exchange among nearby users is exploited. The transmission is split into two phases: local D2D content exchange and DL transmission. In the D2D phase, subsets of users are selected to share content with the adjacent users directly. In this regard, a low complexity D2D mode selection algorithm is proposed to find the appropriate set of users for the D2D phase with comparable performance to the optimal exhaustive search. During the DL phase, the base station multicasts the remaining data requested by all the users. We identify scenarios and conditions where D2D transmission can reduce the delivery time. Furthermore, we demonstrate how adding the new D2D phase to the DL-only scenario can significantly reduce the beamformer design complexity in the DL phase. The results further highlight that by partly delivering requested data in the D2D phase, the transmission rate can be boosted due to more efficient use of resources during the subsequent DL phase. As a result, the overall content delivery performance is greatly enhanced, especially in the finite signal-to-noise (SNR) regime.
Read moreInvestigation of cryosphere processes in the boreal forest zone using ground-based SAR
Ground-based remote sensing is useful for investigating the electromagnetic signatures of natural targets in relatively controlled conditions and at high temporal resolution. Ground-based Synthetic Aperture Radiometry (GB-SAR) can be used to study e.g. the impact of weather phenomena on conservation of radar coherence, a critical factor when using repeat-pass interferometric SAR (InSAR) for retrieval of geophysical parameters from air- or spaceborne platforms. We present a recently developed GB-SAR system and its use for studying wide-band radar signatures in the Northern Boreal Forest zone. Installed on a tower overlooking a coniferous forest stand, the collected time series spans at present three winter periods. The data has been used to assess the capability of InSAR methods to retrieve the mass of seasonal snow mass as well as the impact of environmental factors on conservation of radar coherence and attenuation of the microwave signal in the forest canopy.
Read moreAudio Peak Reduction Using Ultra-Short Chirps
Two filtering methods for reducing the peak value of audio signals are studied. Both methods essentially warp the signal phase while leaving its magnitude spectrum unchanged. The first technique, originally proposed by Lynch in 1988, consists of a wideband linear chirp. The listening test presented here shows that the chirp must not be longer than 4 ms, so as not to cause any audible change in timbre. The second method, called the phase rotator, put forward in 2001 by Orban and Foti is based on a cascade of second-order all-pass filters. This work proposes extensions to improve the performance of the methods, including rules to choose the parameter values. A comparison with previous methods in terms of achieved peak reduction, using a collection of short audio signals, is presented. The computational load of both methods is sufficiently low for real-time application. The extended phase rotator method is found to be superior to the linear chirp method and comparable to the other search methods. The practical peak reduction obtained with the proposed methods spans from 0 to about 3.5 dB. The signal processing methods presented in this work can increase loudness or save power in audio playback.
Read moreRADIOGRAPHIC OSTEOARTHRITIS PROGRESSION PREDICTION VIA MULTI-MODAL IMAGING DATA AND DEEP LEARNING
Validating FR2 MIMO OTA Channel Models in 3D MPAC
Fifth Generation (5G) technology is about to set its global footprint. Its success relies heavily on the standardization process, which is rapidly progressing to specify verification metrics and test methodologies for 5G New Radio (NR) device certifications. For this purpose, three-dimensional (3D) multiprobe anechoic chamber (MPAC) has been selected as a reliable reference solution for creating an accurate test environment. This paper reports first ever FR2 MIMO over-the-air (OTA) channel models validation measurements according to 3GPP specified verification procedure. The evaluated validation metrics include power-delay profile (PDP) and power-angular spectrum (PAS) similarity percentage (PSP). The measurement results closely follow the simulated and theoretical references, thereby demonstrating the feasibility of FR2 MIMO OTA channel models validation procedure adopted by 3rd Generation Partnership Project (3GPP).
Read moreKammrath & Weiss
An abstract is not available for this content. As you have access to this content, full HTML content is provided on this page. A PDF of this content is also available in through the ‘Save PDF’ action button.
Read moreMillimeter-Wave New Radio Test Zone Validation for MIMO Over-the-Air Testing
Standardization efforts to define radiated metrics and test methods for verifying millimeter-wave (mmWave) new radio (NR) devices are currently ongoing. Multi-probe anechoic chamber (MPAC) method, which is capable of reproducing spatial fading channels in the test zone, is selected as the reference solution for NR device testing. It is of importance to ensure that the defined testing propagation environment in the test zone is correctly implemented. In this paper, a novel algorithm is proposed to determine the wideband power-angle-delay profile of the reconstructed channels in the test zone for mmWave NR. The proposed algorithm is shown to be generic (applicable for both 2D and 3D testing setup), applicable for both near-field and far-field conditions and robust (i.e. insensitive to measurement distance errors).
Read more