- Research Article
8
- 10.1016/j.epsr.2023.110048
Analysis of voltage unbalance and mitigation of circulating power in bilateral co-phase traction system
- Dec 03, 2023
- Electric Power Systems Research
- N Pande + 2 more +2
Publications from 2021 to 2026
Showing 10 of 22 papers
Analysis of voltage unbalance and mitigation of circulating power in bilateral co-phase traction system
Reliability analysis based on load spectrum: A structural improvement of Indian Railways three-piece freight bogie elastomeric pad
Dynamic characteristics and reliability of elastomeric pads are dominant components in the design methodology to satisfy the performance parameters under dynamic operations. The fatigue life of rubber pads fitted with elastomeric pads mainly depends upon elastomers; natural rubber, chloroprene, nitrile butadiene, silicon compounds, etc., additives, accelerators, activators, fillers, anti-degradants, and manufacturing processes. The performance of the elastomeric pad is evaluated based on service operation, simulation, and laboratory testing. New and failed elastomeric (EM) pads have been examined in the Indian Rubber Manufacturer’s Research Association IRMRA laboratory for detailed failure analysis of existing EM pads. Further, chemical and physical properties are also evaluated in M&C (Metallurgical and Chemical) and Testing Directorate of Research Designs and Standards Organization (RDSO), labs respectively. The fatigue life of the EM pad is estimated based on the results extracted from the Finite Element (FE) analysis of the EM pad. An attempt is made to modify the design of the EM pad by considering the results of detailed field trials, lab testing, and FE analysis. The modified design satisfies the dynamic characteristic during FE (Structural and Thermal) analysis and lab testing.
Read moreSummary of Railway Track Guided WaveDetection Based on Electromagnetic Acoustic Transducer Technology
Indian Railway has expanded its track to approximately 115,000 km's reaching to every nook and corner of the country.
Replacement of Diesel Fuel by DME in Compression Ignition Engines: Case for India
Decarbonising of transport, industrial and all sectors of economy is a necessity to stop or reverse global warming. Use of batteries, fuel-cells, hybrid topographies with smaller IC engines and use of alternative fuels like methanol, ethanol, DME in the IC engines are some of the ways through which emission of green-house gases can reduced/eliminated. Diesel engines are highly efficient due to higher compression ratios and are used in the heavy-duty transportation vehicles. DME is a single molecule fuel having high cetane number and which can be used as a drop-in fuel on the diesel engines albeit with retro-fitment of these engines with a new pressurized fuel system. DME with a chemical formula CH3-O-CH3 can be produced by different feedstocks such as coal, natural gas, biomass and bio-waste and municipal solid waste. India has a large reserve of high ash coal and generates high quantities of biomass and MSW, all of which can be converted to DME by use of clean production technologies. India’s transport and industrial sectors consume about 100 billion liters of diesel fuel per year produced entirely from imported petroleum. This amount of diesel can be replaced by indigenously produced DME from locally available coal, biomass and MSW.
Read moreImplementation of a large‐scale breast cancer early detection program in a resource‐constrained setting: real‐world experiences from 2 large states in India
BackgroundThe Breast Health Initiative (BHI) was launched to demonstrate a scalable model to improve access to early diagnosis and treatment of breast cancer.MethodsA package of evidence‐based interventions was codesigned and implemented with the stakeholders, as part of the national noncommunicable disease program, through the existing primary health care system. Data from the first 18 months of the BHI are presented.ResultsA total of 108,112 women received breast health education; 48% visited the health facilities for clinical breast examination (CBE), 3% had a positive CBE result, and 41% were referred to a diagnostic facility. The concordance of CBE findings between health care providers and adherence to follow‐up care improved considerably, with more women visiting the diagnostic facilities and completing diagnostic evaluation within 1 month from initial screening, and with only 9% lost to follow‐up. The authors observed a clinically meaningful decrease in time to complete diagnostic evaluation with biopsy, from 37 to 9 days.ConclusionsThe results demonstrate the feasibility and effectiveness of implementing a large‐scale, decentralized breast cancer early detection program delivered through the existing primary health care system in India.
Read moreAutomatic Generation of Route Control Chart From Validated Signal Interlocking Plan
Railway signalling is a complex and safety critical problem that has been extensively studied and standardised over a long period of time. The signalling equipment is typically procured from standard vendors and configured with yard specific application logic for which the route control chart (RCC) is a key input. As the yard size increases, the number of routes also increases and accordingly the difficulty of RCC preparation increases rapidly. RCC preparation for big yards may take months and affects the project deadlines adversely. In this work we report computational procedures to address: <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$a$ </tex-math></inline-formula> ) capturing of signal interlocking plan (SIP) given on paper and storing it using suitable data structures, <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$b$ </tex-math></inline-formula> ) generating the RCC automatically from the captured SIP supported by procedures based on graph theoretic formulation, <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$c$ </tex-math></inline-formula> ) storing the SIP graphically in memory, <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$d$ </tex-math></inline-formula> ) application of formal methods towards validation of yard structure and <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$e$ </tex-math></inline-formula> ) generation of temporal logic properties for formal verification of electronic interlocking (EI) logic. Several important steps towards RCC generation, such as conflict identification and isolation determination and also validation and verification (V&V) covering yard layout and safety property generation based on graph theoretic modelling are the most interesting aspect of this work. The described techniques have been tested successfully on many actual yards.
Read morePrediction of restoration factor for various maintenance types of railway systems using analytical hierarchy process
Purpose For repairable systems (RSs), reliability estimation is generally performed using virtual age models. Virtual age models consider the effect of maintenance actions by reducing system age using restoration factor (RF). RF is generally estimated from system failure data using various statistical methods. However, RSs such as railway systems experience various types of maintenance actions at different times during their life cycle. To consider all these different types of actions, we need multiple RFs in the virtual age model. As failure data are limited, the estimation of so many parameters becomes a complex problem and it can lead to erroneous inferences. These RFs are representative of effects of maintenance activities on the system. Therefore, these can be predicted from the information about the maintenance actions performed on the system. The paper aims to discuss these issues. Design/methodology/approach The paper considers different types of maintenance actions to predict RF of the system. These maintenance actions involve the replacement of components at some level of assembly. Each component in an assembly has its own impact on assembly restoration. RF for assembly/systems can be obtained by aggregating effects of multiple component replacement using analytical hierarchy process . The RF values obtained for different types of maintenance actions are then used to calculate the virtual age of the system at different failure points. Using these virtual age failure points, suitable distribution is fitted and parameters are estimated. The distribution and parameters provide information about reliability of the system at any point of time. Findings This paper provides an easier approach that gives different RFs for different types of PM and CM. To calculate RFs, it considers the impact of maintenance actions performed as well as the impact of the component on which they are performed. It is simpler and gives more consistent results than other approaches, which estimate RF using different statistical methods. Originality/value This paper provides an alternative approach to predict RF parameters instead of estimating these parameters using statistical methods. Estimation of parameters using different statistical methods is complex in nature and gives erroneous and inconsistent results. The approach given in this paper is simpler and gives more reliable results. This approach can be useful in estimating parameters for RSs when failure data are limited.
Read moreTHEORETICAL EXPLANATION OF VIGILANCE DECREMENT
Vigilance refers to the ability to remain alert on a specific task for longer period of time. During vigilance task performance usually declined with increase in time which is termed as vigilance decrement. Present paper discusses about numerous theories that have been proposed to explain vigilance performance. However, yet a theory has to emerge that could make specific performace related predictions. Recently, two broad families of theories of failures of sustained attention are widely debated in the literature. The first family of theories contends that the decrement in vigilance performance occurs due to mindlessness, boredom, or cognitive under-load produced by monotonous nature of vigilance tasks. On the contrary, the second family of theories posits that the vigilance decrement occurs due to resource demand, mental fatigue, or cognitive over-load placed by highly demanding nature of vigilance tasks.
Read moreLocomotives and Rail Road Transportation
Locomotive wheel failure from gauge widening/condemning: Finite element modeling and identification of underlying mechanism