Semtech (United States)

We report a novel coherent beam combining design scheme for passively coupled PCSEL arrays. Experimental results on GaAs-based arrays show high beam quality, linewidth, and coherency. Such coherent PCSEL arrays can leads to very high brightness compact semiconductor laser sources.

The LoRaWAN security design adheres to state-of-the-art principles: use of standard, well-vetted algorithms, and end-to-end security. The fundamental properties supported in LoRaWAN security are mutual end-point authentication, data origin authentication, integrity and replay protection, and confidentiality. The use of symmetric cryptography and prior secret key sharing between a device and a server enables an extremely power efficient and network efficient activation procedure.

A 10-bit 2-GS/s mixed-signal baseband (BB) circuit, which enables a self-healing 60-GHz 4-Gb/s radio-on-chip implemented in a 65-nm complementary metal-oxide semiconductor, is described. The BB circuit autonomously senses and optimizes transmitter (TX) P <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">1dB</sub> , OIM <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sub> , and image suppression, reducing the yield loss because of process variations. On-chip test tones are generated using a 10-bit 2-GS/s current-steering digital-to-analog converter (DAC) and direct digital frequency synthesizer (DDFS). Using the generated test tones, the aforementioned impairments are measured by an envelope detector at the power amplifier output. Based on this information, the programmable digital IQ phase amplitude and offset controller (IQ_CTRL) in the BB circuit improves the TX image suppression from -32.4 to -42.6 dBc, and digital control signals generated by the on-chip self-healing controller heal the TX P <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">1dB</sub> and OIM <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sub> from 9.5 to 13.2 dBm and from -32.5 to - 40 dBc, respectively. In terms of achieving the target specifications, namely, TX image suppression , , and , healing increases yield on ten dies from 0% to 100%. The BB circuit consumes only 49 mW, of which 37 mW comes from the DACs and 12 mW from the DDFS and the IQ_CTRL.

A closed-loop control system incorporating fuzzy logic has been developed for a class of industrial temperature control problems. A unique fuzzy logic controller (FLC) structure with an efficient realization and a small rule base that can be easily implemented in existing industrial controllers was proposed. The potential of FLC in both software simulation and hardware tests in an industrial setting was demonstrated. This includes compensating for thermo mass changes in the system, dealing with unknown and variable delays, operating at very different temperature set points without retuning, etc. It is achieved by implementing, in the FLC, a classical control strategy and an adaptation mechanism to compensate for the dynamic changes in the system. The proposed FLC was applied to two different temperature processes and performance and robustness improvements were observed in both cases. Furthermore, the stability of the FLC is investigated and a safeguard is established.