- Research Article
- 10.1016/j.jacl.2013.03.065
The Effects of One Avocado Per Day on Small, Dense LDL and the Relationship of TG, VLDL, HDL, ApoB, and ApoB/A1 with LDL Particle Size*
- May 01, 2013
- Journal of Clinical Lipidology
- Li Wang + 2 more +2
Publications from 2021 to 2026
Showing 10 of 128 papers
The Effects of One Avocado Per Day on Small, Dense LDL and the Relationship of TG, VLDL, HDL, ApoB, and ApoB/A1 with LDL Particle Size*
Minimum Film Thickness in a Gas Foil Journal Bearing with an Unbalanced Rotor
A gas-lubricated foil journal bearing consists of a compliant metal shell structure that supports a rigid journal or rotor by means of a gas film. The response of this system to the periodic forces of an unbalanced rotor supported by a single bearing is predicted using perturbation analysis. The foil structure and the gas film are modeled with an analytically perturbed finite element approach to predict the rotor dynamic coefficients. A dynamic model of the rotor is used to predict periodic journal motion. The perturbation analysis is then used with the periodic response of the rotor to calculate periodic changes in the gas film thickness. Other quantities such as the gas film pressure and the foil deflection can also be calculated. The model includes bending and membrane effects in the top foil, coupled radial and circumferential deflections in the corrugated sub-foil, and the equivalent viscous dissipation of Coulomb friction effects in the foil structure. The approach is used to investigate the effects of top-foil thickness on minimum film thickness in a bearing.
Read moreDesign of an LTCC integrated tri-band direct conversion receiver front-end module
This paper presents the results of a front-end receiver module integrating GSM/DCS/PCS band select functions and a direct conversion IC on a low temperature cofired ceramic (LTCC) substrate. The front-end-module (FEM) integrated a SP3T GaAs PHEMT switch for band selection, three SAW filters for pre-selection, and a direct conversion IC for down conversion of the RF signal. Integrated passives included a PCS balun, direct conversion IC matching elements and structures to improve the performance of differential SAW filters. The LTCC module contained 24 embedded passives and 15 surface mount components integrated on a 328 mil/spl times/586 mil, 19-layer multi-layer integrated circuit (MLIC). Receiver sensitivity was better than -114 dBm, the system noise figure was less than 9 dB, and the return loss characteristics measured at the antenna input port were better than 10 dB for all three bands. EM simulation was used to achieve first pass design success and the modeling approach yielded excellent agreement between measured and simulated results.
Read moreThe Beast in the Boudoir: Petkeeping in Nineteenth-Century ParisKete, Kathleen. <i>The Beast in the Boudoir: Petkeeping in Nineteenth-Century Paris</i> . Berkeley: University of California Press, 1994. Pp. 200. ISBN 0-520-07101-8.
Heterosexual Therapists Leading Lesbian and Gay Therapy Groups: Therapeutic and Political Realities
The authors describe the thought processes, plans, and reflections of two heterosexual therapists who decided to lead gay and lesbian therapy groups in a university counseling center. The debate regarding the viability of the heterosexual counselor and the gay and lesbian client pair is discussed, as are the practical issues informing and maintaining thegroups. Campus political issues regarding the groups and counselor homophobia are explored.
Read moreLocalized impact damage in transformation-toughened zirconia
Localized Impact Damage in a Viscous Medium (Glass)
Two basic modes of localized contact damage have been observed in brittle and semi-brittle materials under “static” loading conditions (1,2,3). Blunt indenters, such as relatively large diameter spheres, form Hertzian cone cracks. Smaller spheres and sharp indenters such as abrasive grain, indent the surfaces forming radial cracks and lateral vent cracks. Recent investigations of impacts of glass plates by glass spheres have shown that Hertzian cone cracks, radial cracks and lateral vent cracks are formed (4,5). Branching of the Hertzian cracks is common and can be used to estimate the fracture stresses (6). At high impact velocities both blunt and sharp particles cause crushing and the fracture patterns become very complex. Evans and Wilshaw (3) have shown that, for “static” contact stresses, the transition from Hertzian damage to indentation damage observed with decreasing brittleness in a series of materials, results from a decrease in the radial tensile stress (σ11) and a change in sign of the tangential stress (σ22) from compressive to tensile.
Read moreWord Rhythms
Fracture mirrors in alumina ceramics
Abstract Fracture mirror radii (r m) of strong, fine-grained alumina ceramics were measured and correlated with the fracture stress (σ f ) to show that the relation σ f rm 1/2 = constant, previously established for glass, applies for alumina ceramics at room temperature and at elevated temperatures. The mirror measurements were used to estimate the residual stresses in quenched alumina rods and to construct a residual stress profile. Using this stress profile and the local stress due to the applied load, the stresses acting to cause fracture at internal flaws in the quenched rods were estimated. These results show that the local stresses causing fracture decrease with increasing relative distance from the rod axis.
Read moreDelayed fracture of alumina ceramics with compressive surface layers