- Research Article
- 10.1016/j.measurement.2026.121185
A measurement method of circular profile and its circumferential harmonic components with system error elimination
- May 01, 2026
- Measurement
- Bin Wang + 5 more +5
Publications from 2021 to 2026
Showing 10 of 121 papers
A measurement method of circular profile and its circumferential harmonic components with system error elimination
A Comparative Analysis of the Synoptic Conditions and Thermodynamics of Two Thundersnow Weather Events in Shaanxi Province, China, During 2023
This study presents a comparative analysis of two rare thundersnow events accompanied by snowfall that occurred on 11 November 2023 and 10 December 2023 in Shaanxi province, China. Multiple data sources were integrated, including MICAPS surface and upper-air conventional detection observations, hourly meteorological records from Yanliang Airport, lightning location data, and ERA5 reanalysis, to examine and contrast the synoptic conditions, moisture transport mechanisms, and convective characteristics underlying these two events. The results indicate that the large-scale circulation patterns were characterized by a “high in the west and low in the east” configuration and a “two troughs-one ridge” pattern for the November and December cases, respectively. In both episodes, Shaanxi Province was located on the rear side of a high-pressure ridge, where a strong pressure gradient induced pronounced northerly winds that advected cold air southward, forming a distinct near-surface cold pool. During the November event, the convective cloud system developed east of the Tibetan plateau, guided by a westerly flow, and propagated eastward while gradually weakening, with a minimum brightness temperature of −42 °C. Conversely, in December, the convective activity initiated over southwestern Shaanxi and moved northeastward under a southwesterly flow, reaching a lower minimum brightness temperature of −55 °C, indicative of stronger vertical development. In both events, the principal water vapor transport occurred near the 700 hPa height level and was primarily sourced from the Bay of Bengal via a southwesterly flow. The November event featured a stronger northwesterly cold-air intrusion, whereas the December case exhibited a broader moisture channel. The CAPE values peaked during the afternoon and nighttime periods in both cases. The cold-pool and inversion-layer thickness were approximately 2 km/45 hPa in November and 0.8 km/150 hPa in December.
Read moreCombined Anti-Jamming Technology for High-Speed Mobile UAV Data Links
To address the critical challenges of reliable communication for modern unmanned aerial vehicles (UAVs) operating under high-speed mobility and within complex electromagnetic conditions, this paper proposes and implements a high-performance data link system. Leveraging a Software Defined Radio (SDR) architecture, the solution seamlessly integrates image transmission, data telemetry, and control functionalities. To mitigate Doppler frequency shifts and multipath fading inherent in high-mobility scenarios, the research focuses on a rapid signal acquisition technique utilizing joint detection of multi-segment PN codes, alongside an efficient Single-Carrier Frequency-Domain Equalization (SC-FDE) method. Furthermore, to counter complex electromagnetic interference, a hierarchical anti-jamming strategy was designed, coordinating multi-stage filtering, frequency hopping, frequency-domain notching, and intelligent spectrum sensing. Simulation results and theoretical analysis show that these key technologies can significantly improve signal acquisition probability, effectively suppress multipath and interference, and ensure the reliability and stability of the data link in harsh environments.
Read moreAgile Development of Real-time Monitoring Software Based on Front-end and Back-end Separation
In order to improve the design and development efficiency of flight test real-time monitoring software, Shorten the real-time monitoring task preparation period as the goal, the agile development model of real-time monitoring software based on front-end and back-end separation is studied. A method of data analysis algorithm encapsulation and scheduling based on operators is proposed. General management and maintenance of analysis algorithms are realized through customized algorithm development framework. Realize the back-end development componentization, reduce software code repetitive development; Vue’s bidirectional binding technology is used to establish the mapping relationship between view components and parameters. Realize automatic synchronization of data and view, dynamic binding of page components and monitoring parameters, and reduce design costs. The results show that this model can quickly respond to the complex and changeable real-time monitoring task requirements. Reduce the amount of software code by at least 50%, half the development cycle, significantly improve the development efficiency of real-time monitoring software, It provides a new idea for the design of real-time monitoring software. It can be quickly reconstructed according to different application scenarios to meet the application requirements of new models in the future.
Read moreUnsteady cavitation flow characteristics around three-dimensional twisted hydrofoils experimental study
Abstract This paper experimentally investigates the unsteady cavitation flow characteristics around two types of three-dimensional twisted hydrofoils, namely NACA0009 and Clark-y. It focuses on analyzing the evolution of cavity morphology with cavitation number and its correlation with the flow field structure. The results show that as the cavitation number decreases, the cavity size of both hydrofoils increases, but the cavitation development of the Clark-y hydrofoil is more sensitive to changes in the cavitation number. Flow field measurements indicate that the leading-edge velocity distribution of the NACA0009 hydrofoil results in better cavity attachment and more stable development. In contrast, the Clark-y hydrofoil has a larger cavity size, a wider low-velocity region at the trailing edge, and stronger unsteadiness under low cavitation numbers. These findings demonstrate that the cross-sectional shape of the hydrofoil dominates the unsteady characteristics of cavitation by influencing the leading-edge flow field.
Read moreHealth Assessment Method for EWIS Based on Bayesian Inference and Expert Knowledge
With the increasing complexity of modern aircraft, the Electrical Wiring Interconnection System (EWIS) has become a critical component in ensuring flight safety and system reliability. However, due to prolonged exposure to harsh environments such as high temperatures, vibrations, humidity, and electromagnetic interference, the components of EWIS systems are prone to aging, wear, and insulation degradation, which pose serious threats to system performance and aviation safety. Although existing health assessment methods have made some progress, these methods often rely on large-scale or high-precision data that are difficult to obtain, or are limited to a single source of information, restricting their applicability. To address these issues, this paper proposes a health assessment method for EWIS based on the integration of Bayesian inference and expert knowledge. Under conditions of small sample sizes, this method combines multi-source data with expert knowledge to manage uncertainty, conduct causal reasoning, and provide robust health status predictions. The study shows that this method improves the accuracy, interpretability, and adaptability of health assessments, provides scientific decision support for aircraft maintenance, and offers both theoretical and practical value for the health management and predictive maintenance of other high-risk complex systems.
Read moreLearning to Optimize RIS-RSMA for Multi-Robot Communication with Max-Min Fairness
This paper proposes an automated control framework for multi-robot communication systems. In this framework, a base station (BS) coordinates a team of robots through dynamically optimized wireless links. We develop a Graph Neural Network (GNN) based approach to achieve automated control of BS power allocation, beamforming, and reconfigurable intelligent surface (RIS) phase shifts. By modeling the communication environment as a graph, our method enables fully automated control. This control dynamically adapts to real-time channel conditions and robot mobility patterns. The control objective is to achieve max-min rate fairness through autonomous resource allocation, thereby ensuring reliable connectivity for all robotic agents. Simulation results demonstrate that our automated controller achieves superior performance in convergence speed and adaptation capability. Consequently, it provides an effective solution for autonomous multi-robot operations in complex environments.
Read moreA Slot Antenna Applicable to Flight Tests
Flight test is one of the crucial links in the development of aviation equipment, and the telemetry system plays an indispensable role in ensuring test safety and acquiring key data. To meet the development needs of modern telemetry systems, this paper proposes a slot antenna applicable to flight tests. Composed of a feed line and an S-shaped slot, the antenna generates broadband circularly polarized waves by loading a tuning stub on the feeder line for impedance matching, enhancing the coupling between the feed stub and the S-shaped slot, and implementing certain modifications to the ground plane. The overall dimensions of the antenna are 0.85λ×0.85λ×0.011λ. The −10 dB reflection coefficient bandwidth of the antenna reaches 84.7% (covering the frequency range of 1.7–4.2 GHz), and the 3 dB axial ratio bandwidth is 58.3% (spanning 1.7–3.1 GHz). Within the operating bandwidth of the antenna, the gain ranges from 2 dBic to 5.1 dBic. Featuring a simple structure, wide operating bandwidth, and low manufacturing cost, the antenna can cover the commonly used S-band and is thus suitable for aviation flight tests.
Read moreA confident learning-based coordinate attention-guided fusion vision transformer for mixed-type wafer map defect detection
Investigation of the optimization design of the axial fan stator based on the optimal load distribution coefficient
Driven by the demand for higher thrust-to-weight ratios in modern aero engines, challenges have arisen in enhancing fan and compressor performance through increased load and linear velocity. This study investigated the optimal load distribution coefficients for various blades across different inflow Mach numbers and subsequently reselected the load distribution coefficients along each section of a transonic fan stator, achieving geometric optimization and modification. The stator's weight was reduced by 15%, while the total pressure ratio remained nearly unchanged. Improvements of approximately 0.29% in peak efficiency and 1.26% in stall margin were attained. Comprehensive flow field analyses revealed the flow mechanisms underlying these performance gains at both peak efficiency point and near stall point conditions. Despite the aerodynamic benefits of the front-loaded design, intensified corner separation at the stator root was observed in three-dimensional flows lacking significant meridional acceleration. It is suggested that applying a load distribution coefficient below 1 at the stator root can mitigate corner separation and the development of passage vortex, thereby enhancing aerodynamic performance and stall margin.
Read more