- Research Article
1
- 10.1016/j.epsr.2025.112541
Bi-level energy sharing model between multi-energy cloud energy storage and multiple integrated energy systems
- Apr 01, 2026
- Electric Power Systems Research
- Wenting Hou
Publications from 2021 to 2026
Showing 10 of 425 papers
Bi-level energy sharing model between multi-energy cloud energy storage and multiple integrated energy systems
Detwinning deformation behaviors in Fe-Co-Ni-Al-Ti multi-component alloys
FeCoNi-based multi-component alloys have great potential for engineering applications due to their excellent mechanical properties. In this study, (FeCoNi)95(AlTi)5 and (FeCoNi)90(AlTi)10 alloys (named AT5 and AT10) were prepared by vacuum arc melting and then homogenized, cold-rolled, and recrystallized in sequence. It was found that the AT5 alloy had a single FCC phase, while the AT10 contained an FCC matrix, and L12 precipitates with a grain size of ∼4.6 nm and a volume fraction of ∼17.3%. The microstructural evolution and deformation behaviors at different deformation stages were systematically studied by in situ tensile electron backscatter diffraction. Results showed that the AT5 alloy has a yield strength of 231 MPa and a ductility of 55.4%, whereas the AT10 alloy reaches 327 MPa and 34.5%. The AT5 alloy deformed by dislocation planar slip, in contrast to the wavy slip in the AT10 alloy. The increased large-sized atoms in AT10 alloy caused significant lattice distortion and solid solution strengthening, which increased the dislocation density and enhanced strain hardening capacity. However, the solute drag and nano-precipitates led to inhomogeneous deformation within grains, promoting void formation and premature failure. Both alloys showed a strain-induced detwinning behavior at different deformation stages. Despite a lower stacking fault energy in the AT10 alloy, its annealed twin content was reduced due to the nano-precipitates and solute drag. This in situ study provides real-time and compelling insights into the deformation mechanisms of high-performance multi-component alloys.
Read moreOne-bright-two-dark ring solitons of partially directional nonlocal three-component nonlinear Schrödinger model
Abstract This research systematically explores a 3D nonlinear Schrödinger model with three components characterized by partial directionally nonlocal nonlinearities within harmonic and linear potentials in nonlinear optics and BEC. To construct optical soliton solutions, our work introduces a mapping procedure that establishes correspondence between nonautonomous and autonomous models. Through rigorous application of the bilinearization technique, we successfully derive analytical solutions for three-component solitons, encompassing both one-bright-two-dark ring single-soliton and bi-solitons. Comprehensive analysis is conducted on their spatiotemporal evolution and partially nonlocal characteristics, with particular emphasis on elucidating the formation mechanisms of multilayer and multihump structures governed by the Hermite polynomial parameter.
Read moreEffects of Canine Paw Pad Morphology on Nonlinear Mechanical Behavior and Cushioning Performance
The paw pad is an outstanding cushioning structure, which demonstrates nonlinear mechanical characteristics when subjected to pressure. Nonlinear mechanical characteristics are generally considered to be related to the viscoelastic properties of the material. However, the relationship between its nonlinear mechanical properties and the morphological characteristics of the paw pad remains unknown. In this study, morphological data, mechanical data, and finite element simulation methods were integrated to explore how the unique shape of the paw pads enables them to exhibit excellent cushioning performance. The research findings indicate that the paw pad exhibits an irregular morphology. Nevertheless, its cross-sectional area increases in proportion to the increase in the paw pad height, presenting a linear gradient relationship (R2 = 0.99). Two comparison models with the same volume and height but different morphologies as the paw pad model, were designed for finite element simulation. The finite element static analysis shows that the influence of morphology is mainly reflected in the early deformation process, while the influence of viscoelastic material properties is reflected in the later load-bearing capacity. The finite element dynamic analysis shows that compared with the comparison models, the paw pad model has a more stable force during the impact process, without an instantaneous impact force at the initial contact moment. Moreover, the peak normal ground reaction force (GRF) component under different impact speeds is lower than that of the comparison models, demonstrating better buffering effects. The research results can provide inspiration and a biomechanical basis for the morphological design of buffering units.
Read moreEffective running coupling constant and jet quenching parameter in a spinning background from holography
In this work, we study the effective running coupling constant of heavy quark pair and jet quenching parameter in the spinning background. Ultralocally, the boosted fluid is described by the boosted parameter and dual to a globally rotating system. Our results show that the angular momentum suppresses the effective running coupling constant and reduces its maximum value. The results demonstrate that the angular momentum promotes the dissociation of quarkonium and has a stronger effect on the effective running coupling constant when the axis of <a:math xmlns:a="http://www.w3.org/1998/Math/MathML" display="inline"> <a:mi>Q</a:mi> <a:mover accent="true"> <a:mi>Q</a:mi> <a:mo stretchy="false">¯</a:mo> </a:mover> </a:math> is transverse to the direction of the angular momentum. We also find that the angular momentum enhances the jet quenching parameter and has a stronger effect when the jet moves transversely to the direction of the angular momentum, namely <e:math xmlns:e="http://www.w3.org/1998/Math/MathML" display="inline"> <e:msub> <e:mover accent="true"> <e:mi>q</e:mi> <e:mo stretchy="false">^</e:mo> </e:mover> <e:mo>⊥</e:mo> </e:msub> <e:mo>></e:mo> <e:msub> <e:mover accent="true"> <e:mi>q</e:mi> <e:mo stretchy="false">^</e:mo> </e:mover> <e:mo stretchy="false">∥</e:mo> </e:msub> </e:math> . We discuss the dependence of the jet quenching parameter on the <l:math xmlns:l="http://www.w3.org/1998/Math/MathML" display="inline"> <l:mi>η</l:mi> <l:mo>/</l:mo> <l:mi>s</l:mi> </l:math> at strong coupling in the presence of the angular momentum.
Read moreLatest advancements of proton-conductive covalent organic frameworks and related membranes over the past five years.
Lattice hydrogen-mediated dual-hydrogen synergy for efficient nitrate reduction reaction
• By employing lattice hydrogen (H lat ) as an additional efficient hydrogen source, we achieve both a stable supply of reactive hydrogen species and effective suppression of the competitive hydrogen evolution reaction (HER). • A unique dynamic H lat consumption-regeneration balance is established, which referred to as ‘hydrogen pump’ mechanism. • H lat operates synergistically with adsorbed hydrogen (H ads ) to establish a dual-hydrogenation pathway in nitrate reduction reaction (NO 3 - RR), significantly accelerating the reaction kinetics and suppressing HER. The electrocatalytic nitrate reduction reaction (NO 3 - RR) provides a sustainable route for mitigating aqueous nitrate pollution but suffers from insufficient hydrogen source and competitive hydrogen evolution reaction (HER). To address this, we constructed metal hydride electrocatalysts where lattice hydrogen (H lat ) cooperates with adsorbed hydrogen (H ads ) to promote NO 3 - RR. Computational studies revealed that at the active sites, both H ads originating from interfacial water dissociation and H lat adjacent to intermediates directly participate in NO 3 - RR, synergistically accelerating reaction kinetics. Notably, a unique ‘hydrogen pump’ mechanism is successfully established: H lat consumption during reaction generates vacancies, while at inactive sites, hydrogen species produced by spontaneous dissociation of interfacial water migrate spontaneously into the lattice, replenish vacancies, and regenerate H lat , which subsequently participate in further hydrogenation processes, thereby maintaining a dynamic balance of hydrogen cycle. Compared to pure metal catalysts, the metal hydrides system can utilize the dynamic synergy between H lat and H ads to significantly optimize the NO 3 - RR hydrogenation thermodynamics and kinetics, thus suppressing HER and boosting catalytic efficiency. Our work proposes a novel strategy employing a dual-hydrogenation pathway (H lat − H ads ) system that significantly enhances nitrate to ammonia conversion efficiency, enabling efficient removal of aqueous nitrate pollution and facilitating the recycling of nitrogen resources.
Read moreEndoplasmic reticulum stress-induced CHOP activation mediates NLRP3 inflammasome-dependent pyroptosis in BDE-47-induced cognitive dysfunction.
Cellulomonas olei sp. nov., isolated from oil-contaminated soil.
A bacterial strain, designated as P4T, was isolated from an oil-contaminated soil sample. The cells were Gram-stain-positive, short rod-shaped and motile with a single lateral flagellum. Growth of the strain was observed at 20-40 °C (optimum at 30 °C), at pH 6.0-11.0 (optimum at pH 7.0) and with 0-5.0 % (w/v) NaCl (optimum at 1.0%). Phylogenetic analysis based on 16S rRNA gene sequences revealed that strain P4T was closely related to the members of genus Cellulomonas, with the highest sequence similarity to Cellulomonas hominis DSM 9581T (99.5%), followed by Cellulomonas endometrii Marseille-Q7820T (99.1%), Cellulomonas pakistanensis NBRC 110800T (99.0%) and Cellulomonas denverensis NBRC 110783T (98.1%). The draft genome sequence of strain P4T was 3.98 Mb in length, with a DNA G+C content of 75.5 mol%. The average nucleotide identity and digital DNA-DNA hybridization values between strain P4T and the closely related type strains were in the range of 78.6-84.4 % and 21.9-28.2 %, respectively. The predominant cellular fatty acids of strain P4T included anteiso-C15 :0, C16:0, C14:0, iso-C15:0 and anteiso-C17:0. The main polar lipid was composed of diphosphatidylglycerol, glycophospholipid, glycolipid and three phosphatidylinositol mannosides and the major menaquinone was MK-9(H4). Based on the polyphasic characterization, strain P4T (=KCTC 49393T=CCTCC AB 2019402T) represents a novel species of the genus Cellulomonas, for which the name Cellulomonas olei sp. nov. is proposed.
Read morePhotocatalyst-free access to α-arylethanone oximes enabled by sequential HAT/SET of aryl iodides with TBN and alkenes.
Herein, we report a regioselective aryl-oximation of alkenes that proceeds without a photocatalyst. This method exploits a hydrogen atom transfer (HAT)/single-electron transfer (SET) relay sequence to activate aryl iodides, employing tert-butyl nitrite (TBN) as a dual-function reagent that serves as both the HAT agent and the oxime source. This transformation utilizes cost-effective, readily available formate salts as SET reagents under simple conditions, featuring a broad substrate scope and excellent functional group tolerance to provide a novel pathway for oxime synthesis.
Read more