3D Air-X UAV Communications: Challenges and Channel Modeling

Unmanned aerial vehicle (UAV) communication has been deemed as a promising technology to collect data for the Internet of Things (IoT) in inaccessible areas. However, due to the limited UAV flight time, traditional UAV communication may not be competent for large-scale IoT data collection. This paper considers integrating non-orthogonal multiple access (NOMA) into UAV communication systems to collect data for large-scale IoT devices within UAV flight time. We aim to minimize the total energy consumption of IoT devices while ensuring data collection, by jointly optimizing UAV trajectory, IoT device scheduling and transmit power. The formulated problem is a mixed integer non-convex problem, which is challenging to solve in general. We propose a data collection optimization algorithm (DCOA) to solve it by applying the Generalized Benders Decomposition (GBD) and successive convex approximation (SCA) techniques. Then, a greedy algorithm (GA) is also proposed to reduce complexity by simplifying the optimization of UAV trajectory and IoT device scheduling. Finally, the numerical results demonstrate that, compared with traditional UAV communication systems, the NOMA-aided UAV system performs better in terms of data collection and lower total energy consumption of IoT devices can be achieved by DCOA.

Wireless communication is an essential technology to unlock the full potential of unmanned aerial vehicles (UAVs) in numerous applications and has thus received unprecedented attention recently. Although technologies such as direct link, WiFi, and satellite communications are still useful in some remote scenarios where cellular services are unavailable, it is believed that exploiting the thriving 5G and beyond cellular networks to support UAV communications is the most promising and cost-effective approach, especially when the number of UAVs grows dramatically. On the one hand, to guarantee safe and efficient flight operations of multiple UAVs, it is of paramount importance to provide secure and ultra-reliable communication links between the UAVs and their ground pilots or control stations for conveying command and control signals, especially in beyond-visual-line-of-sight (BVLOS) scenarios. On the other hand, because of advances in communication equipment miniaturization as well as UAV manufacturing, mounting compact and lightweight base stations (BSs) or relays on UAVs becomes increasingly feasible. This has led to two promising research paradigms for UAV communications, namely, UAV-assisted cellular communications and cellular-connected UAVs, where UAVs are integrated into cellular networks as aerial communication platforms and aerial users, respectively. As such, integrating UAVs into cellular networks is believed to be a win-win technology for both UAV-related industries and cellular network operators, which not only creates plenty of new business opportunities but also benefits the communication performance of 3-D wireless networks. In addition, UAV related sensing and computing are also helpful for achieving efficient and reliable communication (e.g., in avoiding coverage holes) as well as smart UAV coordination, positioning, and trajectory design. However, 5G and beyond wireless networks with UAVs significantly differs from traditional communication systems, because of the high altitude and high maneuverability of UAVs, the unique UAV-ground channels, the diversified quality of service (QoS) requirements for downlink command and control (C&C) and uplink mission-related data transmission, the stringent constraints imposed by the size, weight, and power (SWAP) limitations of UAVs, as well as the new design degrees of freedom enabled by joint UAV mobility control and communication resource allocation.

In this paper, the advantages of joint detection (JD) in a hybrid-duplex unmanned aerial vehicle (UAV) communication system (HBD-UCS) are investigated as a step toward addressing spectrum scarcity in UAV communications. Through extensive outage probability and finite signal-to-noise-ratio diversity gain analysis, we showed that the performance of JD is independent of the strength and the data rate of the inter-UAV interference signal. On the contrary, the successive interference cancellation (SIC) detector requires the data rate of the interfering UAV to be less than the ground station before meaningful performance can be seen. At the system level, it is observed that the half-duplex UAV communication system outperforms the HBD-UCS with JD at moderate and high SNR regimes, as the latter is constrained by self-interference at the full-duplex ground station. Finally, we investigated the multiplexing gain region and showed that the joint detector offers higher diversity gain over a wide range of multiplexing gains over the interference ignorant and the SIC detector.

Information acquisition and rescue operation management can be facilitated by the use of unmanned aerial vehicles (UAVs) equipped with cameras and sensors that are capable of aerial photography and acquire important information from disaster-stricken areas. UAV technology is a relatively low-cost, flexible, and safe solution in missions that are difficult for humans or other systems. UAV usage in pre-and post-disaster assessment, response, and management is an active area of research. There are two important technical aspects of UAV applications in disaster situations. The first is the limited communication range. Information acquired and photography produced by UAVs are only transmitted in real-time to the ground control station (GCS) within its communication range. Remote real-time monitoring of distant areas beyond the UAV's communication range is not possible using a single UAV. It is only possible through communication among several UAVs. The second is the relatively short flight time due to limited battery capacity. UAV replacement is required in order to carry out a persistent monitoring mission. In this paper, we propose a new remote real-time monitoring system of a distant disaster area using multiple UAVs. Wireless communications between multiple UAVs constitutes a UAV network in our proposed system. Moreover, the proposed system replaces the UAVs in-flight with standby UAVs according to the remaining energy levels. We compare the performance of the proposed system with an existing UAV system. Our simulation results show that the proposed system can achieve efficient remote real-time monitoring.

In recent years, there has been a dramatic increase in the use of unmanned aerial vehicles (UAVs), particularly for small UAVs, due to their affordable prices, wide availability, and relative ease of operability. Existing and future applications of UAVs include remote surveillance and monitoring, relief operations, package delivery, and communication backhaul infrastructure. Additionally, UAVs are envisioned as an important component of 5G wireless technology and beyond. The unique application scenarios for UAVs necessitate accurate air-to-ground (AG) propagation channel models for designing and evaluating UAV communication links for control/non-payload as well as payload data transmissions. These AG propagation models have not been investigated in detail, relative to terrestrial propagation models. In this paper, a comprehensive survey is provided on available AG channel measurement campaigns, large and small scale fading channel models, their limitations, and future research directions for UAV communication scenarios.

In recent years, there has been a dramatic increase in the use of unmanned aerial vehicles (UAVs), particularly for small UAVs, due to their affordable prices, ease of availability, and ease of operability. Existing and future applications of UAVs include remote surveillance and monitoring, relief operations, package delivery, and communication backhaul infrastructure. Additionally, UAVs are envisioned as an important component of 5G wireless technology and beyond. The unique application scenarios for UAVs necessitate accurate air-to-ground (AG) propagation channel models for designing and evaluating UAV communication links for control/non-payload as well as payload data transmissions. These AG propagation models have not been investigated in detail when compared to terrestrial propagation models. In this paper, a comprehensive survey is provided on available AG channel measurement campaigns, large and small scale fading channel models, their limitations, and future research directions for UAV communication scenarios.

Data-centric approaches are increasingly shaping wireless communication research, where the availability and quality of datasets directly influence the reliability of learning-based and model-driven methods. In this context, unmanned aerial vehicle (UAV) communication poses unique challenges, as it requires datasets that jointly capture geometric information, propagation conditions, and diverse link configurations. This work introduces a geometry-aware UAV communication dataset designed to support research on controlled UAV communication link directions and propagation scenarios. The dataset is generated using standardized 3GPP and ITU-R channel models across multiple urban, suburban, and rural regions, accounting for variations in altitude, carrier frequency, and node distribution. The dataset provides spatially resolved channel parameters along with geometry-rich files containing environmental features, which can be used to extract relevant parameters for UAV communication studies. These data support reproducible research in geometry-aware channel modelling, path-loss prediction, LOS/NLOS analysis, delay-related modelling, and trajectory-conditioned link-quality analysis.

In the developing world, the trend of using Unmanned Aerial Vehicles (UAVs) is being increased in many fields. These UAVs are now available in many different versions which ranges from children toy to military level combat equipment. Manufacturing companies are mostly mainly paying attention on reducing power consumption, high data transfer rate, less weight and more speed. However, by keeping focus on these features, most of the UAVs manufacturing companies overlook the factor of security and the risk in case of exploitation is ignored. This fact cannot be ignored that an exploited/hacked UAV with malicious intent can cause serious harm to the target in many ways. In the UAVs development, focus on the less computation power, restricted correspondence data transfer capacity, light weight data carrying limit and robustness captivity in UAVs has become a challenge for security practitioners and researchers. UAVs use numerous communication protocols and one among these protocols is Micro Air Vehicle (MAV) link protocol which is reliable as well as efficient. Currently, there are two versions of MAVlink communication protocol called MAVlink1 and MAVlink2. This protocol is used to establish a communication between Ground Control Station and UAV. The second version of this protocol (i.e. MAVlink2) is recent and there is not much data available about the potential exploitable vulnerabilities present in this protocol. This research paper has explored and identified security vulnerabilities in MAVlink2, specifically linked to the communication of UAV and their impact on UAV. The paper has further analyzed MAVlink2 communication protocol in order to exploit the vulnerabilities in the MAVlink2 protocol for hijacking the UAV.

Traditional wireless security focuses on preventing unmanned aerial vehicle (UAV) communications from suspicious eavesdropping and/or jamming attacks. However, there is a growing need for governments to keep malicious UAV communications under legitimate surveillance. This paper first investigates a new surveillance paradigm for monitoring suspicious UAV communications via jamming suspicious UAVs. Due to the power consumption limitation, the choice of eavesdropping and jamming will reflect the performance of the UAVs communication. Therefore, the paper analyses the UAV’s eavesdropping and jamming models in different cases, and then proposes the model to optimize the data package in the constraints of lower power consumption, which can be solved by the proposed selection policy. The simulation results validate our proposed selection policy in terms of power consumption and eavesdropped packets. In different fading models, power consumption increases with time, regardless of distances, and our proposed policy performs better in Weibull fading channels in terms of eavesdropped packets.

In this paper, we study the trajectory and resource allocation design for downlink energy-efficient secure unmanned aerial vehicle (UAV) communication systems, where an information UAV assisted by a multi-antenna jammer UAV serves multiple ground users in the existence of multiple ground eavesdroppers. The resource allocation strategy and the trajectory of the information UAV, and the jamming policy of the jammer UAV are jointly optimized for maximizing the system energy efficiency. The joint design is formulated as a non-convex optimization problem taking into account the quality of service (QoS) requirement, the security constraint, and the imperfect channel state information (CSI) of the eavesdroppers. The formulated problem is generally intractable. As a compromise approach, the problem is divided into two subproblems which facilitates the design of a low-complexity suboptimal algorithm based on alternating optimization approach. Simulation results illustrate that the proposed algorithm converges within a small number of iterations and demonstrate some interesting insights: (1) the introduction of a jammer UAV facilitates a highly flexible trajectory design of the information UAV which is critical to improving the system energy efficiency; (2) by exploiting the spatial degrees of freedom brought by the multi-antenna jammer UAV, our proposed design can focus the artificial noise on eavesdroppers offering a strong security mean to the system.

In this paper, we propose a novel trajectory design for the unmanned aerial vehicle (UAV) communication systems, where a single UAV moves along with multiple mobile terres-trial users to provide communication services, in the presence of malicious jamming. In our proposed design, we take the users' mobility and the jammer's adaptive jamming power into consideration and model the UAV's trajectory as a Markov decision process. Then, with the goal of optimizing the overall average throughput in our system, we design a twin-delayed deep deterministic policy gradient-based algorithm to judiciously optimize the trajectory of the UAV in a continuous manner, while simultaneously satisfying practical constraints on both the UAV's and users' mobility. We compare the performance of our proposed design with various baselines and show how it can improve the average throughput performance in the presence of malicious jamming and converge at a faster rate.

Unmanned aerial vehicles (UAVs) have stroke great interested both by the academic community and the industrial community due to their diverse military applications and civilian applications. Furthermore, UAVs are also envisioned to be part of future airspace traffic. The application functions delivery relies on information exchange among UAVs as well as between UAVs and ground stations (GSs), which further closely depends on aeronautical channels. However, there is a paucity of comprehensive surveys on aeronautical channel modeling in line with the specific aeronautical characteristics and scenarios. To fill this gap, this paper focuses on reviewing the air-to-ground (A2G), ground-to-ground (G2G), and air-to-air (A2A) channel measurements and modeling for UAV communications and aeronautical communications under various scenarios. We also provide the design guideline for managing the link budget of UAV communications taking account of link losses and channel fading effects. Moreover, we also analyze the receive/transmit diversity gain and spatial multiplexing gain achieved by multiple-antenna-aided UAV communications. Finally, we discuss the remaining challenge and open issues for the future development of UAV communication channel modeling.

With the growing popularity of unmanned aerial vehicles (UAVs), spectrum management is a pressing issue, particularly for multi-UAV systems. To this end, a hybrid-duplex (HBD) UAV communication system (UCS) consisting of a full-duplex (FD) enabled ground station (GS), and legacy half-duplex (HD) UAVs is proposed in this paper. To model the fading and shadowing environment commonly encountered in UAV communications, a mix of Rician and Rician shadowed fading is assumed. In particular, novel power series approximations of the Rician shadowed fading power probability density function (PDF), and cumulative distribution function (CDF) are presented, along with closed-form outage probability expressions. Performance analysis shows that the proposed HBD-UCS exhibits lower outage probability than the HD-UCS when shadowing is encountered at low signal-to-noise ratios (SNRs). Also, inter-UAV interference has a stronger influence on outage probability decay at low SNR regimes, with lower inter-UAV interference corresponding to a sharper decline in outage probability.

Federated learning (FL) is considered a promising machine learning technique that has attracted increasing attention in recent years. Instead of centralizing data in one location for training a global model, FL allows the model training to occur on user devices, such as smartphones, IoT devices, or local servers, thereby respecting data privacy and security. However, implementing FL in wireless communication faces a significant challenge due to the inherent unpredictability and constant fluctuations in channel characteristics. A key challenge in implementing FL over wireless communication lies in optimizing energy efficiency. This holds significant importance, especially considering user devices with restricted power resources. On the other hand, unmanned aerial vehicle (UAV) technologies present a cost-effective solution owing to flexibility and mobility compared to terrestrial base stations. Consequently, the deployment of UAV communication in FL is viewed as a potential approach to deal with the energy efficiency challenge. In this paper, we address the problem of minimizing the total energy consumption of all user equipment (UE) during the training phase of FL over a UAV communication network. Our proposed system facilitates UE to operate concurrently at the same time and frequency, thereby improving bandwidth utilization efficiently. In this paper, we address the problem of minimizing the total energy consumption during the training phase of FL over a UAV communication network. To deal with the proposed nonconvex problem, we propose a novel alternating optimization approach by dividing the problem into two suboptimal problems. We then develop iterative algorithms based on the inner approximation method, yielding at least one locally optimal solution. The numerical results demonstrate the superiority of the proposed algorithm in solving the proposed problem compared to other benchmark algorithms, particularly in determining the optimal trajectory of the UAVs. In addition, we conduct extensive experiments to evaluate how different parameter settings affect performance after implementing the proposed optimization approaches for deploying FL within the UAV communication system. These analyses yield valuable insights into the comparative effectiveness of the proposed optimization algorithms concerning overall energy consumption reduction.

Recently, unmanned aerial vehicle (UAV) communications have drawn significant research interests. Meanwhile, cell-free (CF) massive multiple-input multiple-output (MIMO) is proposed as a promising technology to achieve the ultimate performance limits. In this paper, we investigate the UAV communication with wireless power transfer (WPT) aided CF massive MIMO systems, where the harvested energy (HE) from the downlink WPT is used to support both uplink data and pilot transmission. Take hardware impairments of UAV into account, novel closed-form downlink HE and uplink spectral efficiency (SE) expressions are derived. UAV communications with small cell (SC) and cellular massive MIMO enabled WPT systems are also considered for comparison. Our results reveal that CF massive MIMO achieves two and four times higher 95%-likely uplink SE than the ones of SC and cellular massive MIMO, respectively. To this end, SE is a concave function of the time-splitting fraction, and the optimal time-splitting fraction for maximizing SE is determined by the altitude and hardware impairment factor of the UAV.