A Multi-Modal Benchmark Dataset for UAV Wireless Communication Research

Wireless communication is an essential technology to unlock the full potential of unmanned aerial vehicles (UAVs) in numerous applications and has thus received unprecedented attention recently. Although technologies such as direct link, WiFi, and satellite communications are still useful in some remote scenarios where cellular services are unavailable, it is believed that exploiting the thriving 5G and beyond cellular networks to support UAV communications is the most promising and cost-effective approach, especially when the number of UAVs grows dramatically. On the one hand, to guarantee safe and efficient flight operations of multiple UAVs, it is of paramount importance to provide secure and ultra-reliable communication links between the UAVs and their ground pilots or control stations for conveying command and control signals, especially in beyond-visual-line-of-sight (BVLOS) scenarios. On the other hand, because of advances in communication equipment miniaturization as well as UAV manufacturing, mounting compact and lightweight base stations (BSs) or relays on UAVs becomes increasingly feasible. This has led to two promising research paradigms for UAV communications, namely, UAV-assisted cellular communications and cellular-connected UAVs, where UAVs are integrated into cellular networks as aerial communication platforms and aerial users, respectively. As such, integrating UAVs into cellular networks is believed to be a win-win technology for both UAV-related industries and cellular network operators, which not only creates plenty of new business opportunities but also benefits the communication performance of 3-D wireless networks. In addition, UAV related sensing and computing are also helpful for achieving efficient and reliable communication (e.g., in avoiding coverage holes) as well as smart UAV coordination, positioning, and trajectory design. However, 5G and beyond wireless networks with UAVs significantly differs from traditional communication systems, because of the high altitude and high maneuverability of UAVs, the unique UAV-ground channels, the diversified quality of service (QoS) requirements for downlink command and control (C&C) and uplink mission-related data transmission, the stringent constraints imposed by the size, weight, and power (SWAP) limitations of UAVs, as well as the new design degrees of freedom enabled by joint UAV mobility control and communication resource allocation.

Traditional wireless security focuses on preventing unmanned aerial vehicle (UAV) communications from suspicious eavesdropping and/or jamming attacks. However, there is a growing need for governments to keep malicious UAV communications under legitimate surveillance. This paper first investigates a new surveillance paradigm for monitoring suspicious UAV communications via jamming suspicious UAVs. Due to the power consumption limitation, the choice of eavesdropping and jamming will reflect the performance of the UAVs communication. Therefore, the paper analyses the UAV’s eavesdropping and jamming models in different cases, and then proposes the model to optimize the data package in the constraints of lower power consumption, which can be solved by the proposed selection policy. The simulation results validate our proposed selection policy in terms of power consumption and eavesdropped packets. In different fading models, power consumption increases with time, regardless of distances, and our proposed policy performs better in Weibull fading channels in terms of eavesdropped packets.

Recently, unmanned aerial vehicle (UAV) communications have drawn significant research interests. Meanwhile, cell-free (CF) massive multiple-input multiple-output (MIMO) is proposed as a promising technology to achieve the ultimate performance limits. In this paper, we investigate the UAV communication with wireless power transfer (WPT) aided CF massive MIMO systems, where the harvested energy (HE) from the downlink WPT is used to support both uplink data and pilot transmission. Take hardware impairments of UAV into account, novel closed-form downlink HE and uplink spectral efficiency (SE) expressions are derived. UAV communications with small cell (SC) and cellular massive MIMO enabled WPT systems are also considered for comparison. Our results reveal that CF massive MIMO achieves two and four times higher 95%-likely uplink SE than the ones of SC and cellular massive MIMO, respectively. To this end, SE is a concave function of the time-splitting fraction, and the optimal time-splitting fraction for maximizing SE is determined by the altitude and hardware impairment factor of the UAV.

Unlike terrestrial communications, unmanned aerial vehicle (UAV) communications have some advantages such as line-of-sight (LoS) environment and flexible mobility. However, the interference will be still inevitable. In this paper, we analyze the effect of the interference on the UAV communications by considering the LoS probability and different channel fadings for LoS and non-line-of-sight (NLoS) links, which are affected by the elevation angle of the communication link. We then derive a closed-form outage probability in the presence of an interfering node for all the possible scenarios and environments of main and interference links. After discussing the impacts of transmitting and interfering node parameters on the outage probability, we show the existence of the optimal height of the UAV that minimizes the outage probability. We also show the NLoS environment can be better than the LoS environment if the average received power of the interference is more dominant than that of the transmitting signal in UAV communications.

In this paper, the advantages of joint detection (JD) in a hybrid-duplex unmanned aerial vehicle (UAV) communication system (HBD-UCS) are investigated as a step toward addressing spectrum scarcity in UAV communications. Through extensive outage probability and finite signal-to-noise-ratio diversity gain analysis, we showed that the performance of JD is independent of the strength and the data rate of the inter-UAV interference signal. On the contrary, the successive interference cancellation (SIC) detector requires the data rate of the interfering UAV to be less than the ground station before meaningful performance can be seen. At the system level, it is observed that the half-duplex UAV communication system outperforms the HBD-UCS with JD at moderate and high SNR regimes, as the latter is constrained by self-interference at the full-duplex ground station. Finally, we investigated the multiplexing gain region and showed that the joint detector offers higher diversity gain over a wide range of multiplexing gains over the interference ignorant and the SIC detector.

Unmanned aerial vehicle (UAV) communication has been deemed as a promising technology to collect data for the Internet of Things (IoT) in inaccessible areas. However, due to the limited UAV flight time, traditional UAV communication may not be competent for large-scale IoT data collection. This paper considers integrating non-orthogonal multiple access (NOMA) into UAV communication systems to collect data for large-scale IoT devices within UAV flight time. We aim to minimize the total energy consumption of IoT devices while ensuring data collection, by jointly optimizing UAV trajectory, IoT device scheduling and transmit power. The formulated problem is a mixed integer non-convex problem, which is challenging to solve in general. We propose a data collection optimization algorithm (DCOA) to solve it by applying the Generalized Benders Decomposition (GBD) and successive convex approximation (SCA) techniques. Then, a greedy algorithm (GA) is also proposed to reduce complexity by simplifying the optimization of UAV trajectory and IoT device scheduling. Finally, the numerical results demonstrate that, compared with traditional UAV communication systems, the NOMA-aided UAV system performs better in terms of data collection and lower total energy consumption of IoT devices can be achieved by DCOA.

By exploiting the degree of freedom on the altitude, unmanned aerial vehicle (UAV) communication can provide ubiquitous communication for future wireless networks. In the case of concurrent transmission of multiple UAVs, the directional beamforming formed by multiple antennas is an effective way to reduce co-channel interference. However, factors, such as airflow disturbance or estimation error for UAV communications, can cause the occurrence of beam misalignment. In this article, we investigate the system performance of a multitier UAV communication network with the consideration of unstable beam alignment. In particular, we propose a tractable random model to capture the impacts of beam misalignment in the 3-D space. Based on this, by utilizing stochastic geometry, an analytical framework for obtaining the outage probability in the downlink of a multitier UAV communication network for the closest distance association scheme and the maximum average power association scheme is established. The accuracy of the analysis is verified by Monte Carlo simulations. The results indicate that in the presence of random beam misalignment, the optimal number of UAV antennas needs to be adjusted to be relatively larger when the density of UAVs increases or the altitude of UAVs becomes higher.

In anticipation of wide implementation of 5G technologies, the scarcity of spectrum resources for the unmanned aerial vehicles (UAVs) communication remains one of the major challenges in arranging safe drone operations. Dynamic spectrum management among multiple UAVs as a tool that is able to address this issue, requires integrated solutions with considerations of heterogeneous link types and support of the multi-UAV operations. This paper proposes a synthesized resource allocation and opportunistic link selection (RA-OLS) scheme for the air-to-ground (A2G) UAV communication with dynamic link selections. The link opportunities using link hopping sequences (LHSs) are allocated in the GCSs for alleviating the internal collisions within the UAV network, offloading the on-board computations in the spectrum processing function, and avoiding the contention in the air. In this context, exclusive technical solutions are proposed to form the prototype system. A sub-optimal allocation method based on the greedy algorithm is presented for addressing the resource allocation problem. A mathematical model of the RA-OLS throughput with above propositions is formulated for the spectrum dense and scarce environments. An interference factor is introduced to measure the protection effects on the primary users. The proposed throughput model approximates the simulated communication under requirements of small errors in the spectrum dense environment and the spectrum scarce environment, where the sensitivity analysis is implemented. The proposed RA-OLS outperforms the static communication scheme in terms of the utilization rate by over 50% in case when multiple links are available. It also enables the collaborative communication when the spectral resources are in scarcity. The impacts from diverse parameters on the RA-OLS communication performance are analyzed.

Since one GRS used for Control and Non-Payload Communication (CNPC) of Unmanned Aerial Vehicle (UAV) cannot support all operational ranges of an UAV, the handover technology of CNPC is essential to operate an UAV in a wide range. However, the CNPC physical layer standard of Radio Technical Commission for Aeronautics (RTCA) does not have a reference signal for measuring the signal strength of a neighboring base station used for handover decision in an existing mobile communication system. Therefore, in this paper, we propose a method to transmit measurement signals for stable handover of CNPC. The proposed method starts transmission of the measurement signal when the UAV enters the handover zone for the preventing waste of power and generates the measurement signal using the same data that is transmitted through the currently connected Ground Radio Station (GRS) for the preventing packet loss during the handover operation.

Unmanned aerial vehicles (UAVs) have stroke great interested both by the academic community and the industrial community due to their diverse military applications and civilian applications. Furthermore, UAVs are also envisioned to be part of future airspace traffic. The application functions delivery relies on information exchange among UAVs as well as between UAVs and ground stations (GSs), which further closely depends on aeronautical channels. However, there is a paucity of comprehensive surveys on aeronautical channel modeling in line with the specific aeronautical characteristics and scenarios. To fill this gap, this paper focuses on reviewing the air-to-ground (A2G), ground-to-ground (G2G), and air-to-air (A2A) channel measurements and modeling for UAV communications and aeronautical communications under various scenarios. We also provide the design guideline for managing the link budget of UAV communications taking account of link losses and channel fading effects. Moreover, we also analyze the receive/transmit diversity gain and spatial multiplexing gain achieved by multiple-antenna-aided UAV communications. Finally, we discuss the remaining challenge and open issues for the future development of UAV communication channel modeling.

Real-time ray-based channel generation and emulation for UAV communications

The use of unmanned aerial vehicles (UAVs) is growing rapidly, for an expanding variety of applications. These UAVs range in size from a few centimeters to the size of passenger jet aircraft, and will fly a large assortment of missions that take them from the stratosphere to residential neighborhoods. Control and communications must hence be extremely reliable. In this paper we summarize some key characteristics of UAV communications, describe fundamentals and challenges for reliable UAV communications, some current efforts in the area, and provide a framework for analysis and modeling of a vital component in any UAV communication system: the air-ground channel. Features of this channel are discussed, with example references to the literature. Suggestions for future work in air-ground channel modeling are provided. The conference presentation of this work will include example results.

The cooperation of multiple Unmanned Aerial Vehicles (UAVs) has become a promising scenario in Space-Air-Ground Integrated Networks (SA-GINs) recently due to their widespread applications, where wireless communication is a basic necessity and is normally categorized into control and non-payload communication (CNPC) as well as payload communication. In this paper, we attempt to tackle two challenges of UAV communication respectively on establishing reliable CNPC links against the high mobility of UAVs as well as changeable communication conditions, and on offering dynamic resource optimization for Quality-of-Service (QoS) guaranteed payload communication with variable link connectivity. Firstly, we propose the concept of air controlling center (ACC), a virtual application equipped on the infrastructure in SAGINs, which can collect global information for estimating UAV trajectory and communication channels. We then introduce the knapsack problem for modelling resource optimization of UAV communication in order to provide optimal access points for both CNPC and payload communication. Meanwhile, using the air controlling information, predictive decision algorithm and handover strategy are introduced for the reliable connection with multiple access points. Simulation results demonstrate that our proposal ensures an approximate always-on reliable accessing of communication links and outperforms the existing methods against high mobility, sparse distribution, and physical obstacles.

Distributed Path Planning for a UAV Communication Chain by Dual Decomposition

5G enabled maritime unmanned aerial vehicle (UAV) communication is one of the important applications of 5G wireless network which requires minimum latency and higher reliability to support mission-critical applications. Therefore, lossless reliable communication with a high data rate is the key requirement in modern wireless communication systems. These all factors highly depend upon channel conditions. In this work, a channel model is proposed for air-to-surface link exploiting millimeter wave (mmWave) for 5G enabled maritime unmanned aerial vehicle (UAV) communication. Firstly, we will present the formulated channel estimation method which directly aims to adopt channel state information (CSI) of mmWave from the channel model inculcated by UAV operating within the Long Short Term Memory (LSTM)-Distributed Conditional generative adversarial network (DCGAN) i.e. (LSTM-DCGAN) for each beamforming direction. Secondly, to enhance the applications for the proposed trained channel model for the spatial domain, we have designed an LSTM-DCGAN based UAV network, where each one will learn mmWave CSI for all the distributions. Lastly, we have categorized the most favorable LSTM-DCGAN training method and emanated certain conditions for our UAV network to increase the channel model learning rate. Simulation results have shown that the proposed LSTM-DCGAN based network is vigorous to the error generated through local training. A detailed comparison has been done with the other available state-of-the-art CGAN network architectures i.e. stand-alone CGAN (without CSI sharing), Simple CGAN (with CSI sharing), multi-discriminator CGAN, federated learning CGAN and DCGAN. Simulation results have shown that the proposed LSTM-DCGAN structure demonstrates higher accuracy during the learning process and attained more data rate for downlink transmission as compared to the previous state of artworks.