A Bayesian based energy aware routing algorithm for mobile WSNs

Automatic localization is one of the major issues in Wireless Sensor Networks (WSN). DV-hop algorithm is a well-known localization algorithm in WSN but with limited localization accuracy. In this paper, an improved DV-hop localization algorithm in hybrid optical wireless sensor networks is proposed based on the optimization of the parameters in WSN. Various factors that affect the localization accuracy of the DV-hop algorithm in WSN are investigated, including the communication radius of the node, the number of beacon nodes and the number of the total nodes. As the DV-hop algorithm is applied into hybrid optical sensor and WSNs (O-WSN) with rectangular topology, different parameters have to be optimized accordingly. Simulation results show that the square topology outperforms the rectangle topology more than 45 % under the same network parameters using the improved DV-hop algorithm. Therefore another improved DV-hop called Sub-Square Weighted DV-hop (SSW DV-hop) is proposed for the rectangle topology. Both simulation and experiment results demonstrate that applying the SSW DV-hop algorithmin O-WSNs could significantly improve the localization accuracy.

Recently, network localization systems that are based on inter-node ranges have received significant attention. Geographic routing has been considered an application which can utilize the location information from these localization systems. In this paper, we firstly recognize that sensor network localization algorithms generate positioning data with different error patterns compared to those networks where node positions are determined directly from GNSS measurements. Secondly, by simulating practical sensor network scenarios using data from our localization algorithm, we observe that existing geographic routing algorithms in wireless sensor networks (WSNs) adopt very simplistic methods in the treatment of position error, without due consideration of error distribution. Additionally, an insight is given into localization algorithms for WSNs with inhomogeneous error environments. Our observations represent an initial step toward a detailed understanding and design of efficient geographic routing algorithms in location aware WSNs.

In general, wireless sensor network works by a small battery-powered, or limited energy. Once the wireless sensor network is deployed, the energy of small sensor nodes can not be replaced. So, to improve energy efficiency and extend the survival time of the whole network is a crucial issue. This paper presents a new type of energy balancing algorithm for wireless sensor networks. The BCDCP-M algorithm draws on the main idea of the BCDCP routing protocol. When the base station divides the network, the new algorithm makes the number of cluster heads equal to the optimal number of cluster heads as far as possible. On cluster head election, not only the average energy of the sensor network, but also the remaining energy of the individual node must be taken into account. In data transmission, we use the multi-hop method to select the optimal path. The simulation results show that the survival time of the network in the new BCDCP-M algorithm is 19% longer than BCDCP.

Energy conservation and fault tolerance are the most two important challenging issues for the development of large scale wireless sensor networks (WSNs). Failure of cluster heads in a cluster based WSN is more catastrophic as they are responsible not only for data aggregation and transmission of the aggregated data to the base station but also relaying data for multi-hop communication. Therefore, a routing algorithm in WSNs should be energy aware as well as fault tolerant. In this paper, we present a distributed energy efficient and fault tolerant routing algorithm for WSNs. The algorithm selects next-hop cluster head in energy efficient manner in the data routing phase and carefully restores the connectivity of the neighbours of a cluster head in case of its failure. The algorithm is tested extensively by considering several scenarios of WSN. The experimental results are compared with the existing algorithms in terms of several metrics to show the effectiveness of the proposed algorithm.

The main goal of research concerning energy aware routing algorithm for wireless sensor network is to increase the lifetime and long-term connectivity of the wireless sensor networks. However, most of energy aware routing algorithms do not take into account the clustering mechanism efficiently. In this paper, we present an efficient energy aware routing algorithm for the wireless sensor networks. In our algorithm, the data aggregation technique and adaptive clustering mechanism are considered for reducing and compacting the cumulative size of packets on the wireless sensor networks. Simulation results show that the energy usage of EAR-ACM is significantly reduced compared with the previous clustering based routing algorithm for the sensor networks.KeywordsSensor NetworkSensor NodeWireless Sensor NetworkCluster HeadData PacketThese keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Wireless Sensor Networks (WSNs) are usually comprised of a large number of sensor nodes which have limited power resources and require energy efficient routing algorithms. We have presented an Adaptive Transmission Power - Geographical and Energy Aware Routing (ATP-GEAR) algorithm in this paper, which routes the packet towards the destination by calculating the cost of the neighbors of a node in terms of their location and current battery level and transmitting the packet to the lowest costing node with the minimum required transmission power. We analyze the performance of our algorithm based on total power consumption and end-to-end delay from source to destination. Simulation results show that ATP-GEAR yields almost 25% less power consumption and 17% less end-to-end delay when compared with traditional Cluster Based Routing (CBR).

The wireless sensor networks (WSNs) are usually deployed among widely area for environmental monitoring, data collection and other applications. In order to reduce the energy consumption and extend the lifetime of WSNs, as well as receive the data quickly, a source-based data aggregation algorithm (SBDA) for clustering wireless sensor networks is proposed. The method aggregated the data from sensor nodes and marked different transmission priority for the data. Simulation results show that, compared to existing protocols, the proposed method achieves a longer life time, and a lower packet drop ratio.

The paper proposes a new routing algorithm in wireless sensor network. The main idea and the implementing approaches of the algorithm are introduced. The algorithm doesn't require any extra hardware. Simulations show that the algorithm can accomplish routing process correctly and quickly and increase the wireless sensor network's life obviously.

Wireless Sensor Network (WSN) is a collection of sensory nodes forming a provisional network without the assistance of any recognized infrastructure.Due to the minimal range of each node's transmissions, it may be essential for one sensory node to request for the aid of other sensory node in transferring a packet between the source and sink.The important issue while designing WSN is the routing protocol that makes the best use of the severely minimal resource, especially the energy consumption.We propose a Energy Conscious multipath Routing Algorithm designed to improve the latency, resiliency and efficiency through discovering multiple routes between the source and sink.A Sink Originated Route Discovery (SORD) process provides the locality information of the source to the sink.One dominant and multiple alternate routes are generated at the end of the route discovering process.Apart from the dominant route, all the other nodes are put to sleep mode in order to conserve energy and create a concussion free route.Data is transmitted between the source and sink through the dominant route and if there is a disturbance in the existing route, the next preferred alternate route is used.If the route doesn't exist between the source and sink, the process starts from the beginning.Further, we analyze how the proposed protocol overcomes the drawback of the existing protocols.This system is implemented by using NS-2.34.By altering route update guidelines of existing on-demand routing schemes the Performance gains in the order of 10-15 % could be achieved.The simulation results show that the proposed protocol has less control packet overhead, less average energy consumption and the algorithm is faster.

Popularity of Mobile Wireless Sensor Network (MWSN) has increased tremendously due to the ability to connect the physical world with the virtual world. In MWSN, Sensor nodes move freely in a target area without the need of any special infrastructure. MWSN has attracted many researchers as it has introduced unique challenges in aspects like resource management, coverage, routing protocols, security in many applications such as target tracking in military applications, detection of catastrophic events, environment monitoring, health applications etc. Due to mobility, routing process in MWSN has become more complicated as connections in the network can change dynamically. This paper proposes a Mobility-Aware Multi-Objective Hybrid Routing Algorithm (MMOHRA) for Wireless Sensor Network (WSN). MMOHRA selects the best route and forwards the data packets from source to sink using multiple metrics such as Average Energy consumption, Control Overhead, Reaction Time, LQI, and HOP Count. Performance of MMOHRA is compared with Simple Hybrid Routing Protocol (SHRP) and Dynamic Multi-objective Routing Algorithm (DyMORA) using metrics such as Average Energy Consumption, Packet Delivery Ratio, and Jitter. MMOHRA improves the Average Energy Consumption (AEC) by a factor of 14.1% as compared with SHRP and 8.13 % as compared to DyMORA. MMOHRA outperformed SHRP and DyMORA in terms of packet Delivery Ratio (PDR) by 10.17 % and 9.83 % respectively.

Conventional IoT applications rely on seamless data collection from the distributed sensor nodes of Wireless Sensor Networks (WSNs). The energy supplied to the sensor node is limited and it depletes after each cycle of data collection. Therefore, data flow from the network to the base station may cease at any time due to the nodes with a dead battery. A replacement of the battery in WSNs is often challenging and requires additional efforts. To ensure the robust operation of WSNs, many fault recovery routing mechanisms have been proposed. Most of the previous fault recovery routing methods incur considerable delays in recovery and high overhead in either energy consumption or device cost. We propose an energy-efficient fail recovery routing method that is aimed to operate over a data aggregation network topology using a TDMA media access control (MAC). This paper introduces a novel fault recovery routing algorithm for TDMA-based WSNs. It finds an optimal neighbor backup parent (NBP) for each node in a way that reduces the energy consumption. The proposed method allows the NBPs to utilize the time slot of the faulty parent nodes, so it eliminates the overhead of TDMA rescheduling for NBPs. To evaluate the fault recovery performance and energy efficiency of the proposed method, we implemented it in C++ simulation program. Simulation experiments with an extensive set of network examples demonstrate that the proposed method can extend the network lifetime by 21% and reduce the energy consumption by 23% compared with the reference methods.

Wireless sensor networks (WSN) have been widely used in urban network system and networked monitoring system, which provide easy connectivity and high physical data rate. Considering the battery-limited property of sensor nodes, recently, energy harvesting (EH) technology is introduced into WSN, which can alleviate traditional WSN problems (energy consumption, energy equilibrium, transmission efficiency, etc.). Current EH-WSN routing algorithms generally use the continuous energy harvesting mode, therefore, how to design an efficient routing algorithm for discrete energy harvesting mode and ensure the overall energy balance and conservation is still a great challenge and needs to be solved. Especially, under the mobile environment, the impact of route stability needs to be considered, which makes the design more complicated. To address the above problems, we propose a learning automata (LA) theory based stable and energy-efficient routing algorithm for discrete EH-mobile WSN (DEH-LA-SERA, for short). Firstly, we construct a multi-factors measurement model for sensor nodes, which contains node stability model, energy ratio function, expected harvesting energy model (using Markov decision process method) and direction judgement model. On this basis, we derive the node weighted value, i.e., selecting probability, which can be used to determine whether a node can be chosen as relay node. Secondly, with the help of LA theory, we construct a feedback mechanism to adjust the optimal path. With this solution, we can ensure the overall energy balance and conservation while holding the stability of selected path. As demonstrated in simulation experiments, our algorithm, DEH-LA-SERA, achieved the best performance in route survival time, energy consumption, energy balance and acceptable performance in end-to-end delay and packets delivery ratio.

Through the Wireless Sensor Network (WSN), researchers have made every effort in advancing sensing technology worldwide. However, the essence of communication is deeply affected by the limited battery operating nature of sensor nodes. A lot of research efforts are reported that deal with this concern. Besides, the routing algorithms that tend to promise energy-efficient and optimized routing still fail to achieve optimized performance. Henceforth, sink mobility is one of the eminent solutions that tend to optimize the network through energy-saving routing strategies. In this paper, we have reviewed the sink mobility-based routing algorithms that are proposed for the Year 2022. We believe this review will help the readers to improvise the routing strategy by identifying the research gaps in the existing techniques.

Wireless sensor networks (WSNs) have been an emerging field in recent years. WSNs have major advantages in battlefields and emergency situations. However, due to the limited power of the sensor nodes, WSNs are restricted with their applications. The effective management of energy over the sensor nodes leads to good performance of the network. In this paper, we are proposing the energy-aware cluster head selection algorithm (ECHSA) for WSNs. The cluster head selection plays a major role in reducing the energy consumption of the cluster. To support our approach, the minimum energy transmission is proposed, and the simulation of the ECHSA is carried out with the NS-2 simulation. The results are compared with the sectored low energy adaptive cluster head (S-LEACH) and Theins algorithms. The results proved the efficiency of the proposed algorithm.

Wireless sensor networks area collection of a large number of unattended sensor nodes. The sensor nodes are dynamically deployed in the region. In wireless sensor networks, the unlicensed sensor nodes use their temporarily available vacant licensed channels or spectrum band in a telecommunication network. The many open challenges with issues such as adaptive in self-organisation, fault-tolerance and network scalability with cooperative spectrum sensing and sharing are identifying new challenges in wireless sensor networks. In this paper, we proposed the bio-inspired adaptive routing algorithm for cognitive radio wireless sensor networks. The utilisation of the foraging approach of ANTs and BEEs for making the decision of using the available spectrum sensing and sharing of channels over multi-hops communication, provides the method to utilise idle channel and decrease the delay for communication in wireless sensor network. In this paper, we design the algorithm to solve the issue of wireless sensor network and performance of classical routing protocol LEACH and cognitive radio sensor networks (CRSN) evaluates the parameters which proof the self-organisation routing algorithm.