A CAD/CAE integration framework for analyzing and designing spatial compliant mechanisms via pseudo-rigid-body methods

The design of the canopy utilizes the conventional rigid body mechanisms which is vulnerable to the presence of backlash, friction of joints or wearing of mechanical parts which lead to short product life. Compliant mechanisms are employed to reduce these mechanical problems, owing to their zero-joint and monolithic structure. A reference design for the conventional canopy was chosen and modified through reviewing different patent designs. Six different configurations of the pseudo-rigid-body model (PRBM) were constructed, and the best configuration was selected. Kinematic synthesis with function generation was performed for the chosen PRBM using MATLAB. The obtained results from the kinematic synthesis were then used to calculate the dimensions and stresses of the flexural pivots for the compliant stretcher mechanism. Finite Element Analysis (FEA) simulation was then performed on each of the models and the obtained flexural pivot stresses were compared with that of the PRBM. This research successfully replaces all the rigid joints and links of the stretcher mechanism of the conventional canopy to form a monolithic structure of compliant stretcher mechanism.

This work introduces an interior contact-aided rolling element (I-CORE) compliant mechanism that draws upon the concepts used for the contact-aided rolling element, cross-axis flexural pivot, and pre-curved flexible beam. The I-CORE incorporates a bilinear compressive stiffness response with an initial tailorable stiffness governed by the flexural geometry, followed by a stiffness curve governed by the material stiffness at the contact point. The I-CORE mechanism can achieve one or two degrees of rotational freedom as well as a single degree of translational freedom. The purpose of the present work was to introduce the I-CORE mechanism, as well as a pseudo-rigid-body replacement model (PRBM) of the I-CORE mechanism which was subsequently validated using both finite element analysis and benchtop mechanical testing. A pseudo-rigid body model was created for the I-CORE to simplify the rapid adaptation of this mechanism to different design applications. This model was validated using both finite element analysis and benchtop mechanical testing under both compression and rotation loading conditions. Additionally, multiple configurations of the device were created and evaluated in order to test its sensitivity to certain design features including the flexure width, flexure thickness, and the radius of the rounded contact surfaces. It was found that the model is sensitive to the thickness of the flexures and that despite some limitations, the pseudo-rigid body model is sufficiently accurate for initial design work. Some possible applications of the mechanism are proposed.

A new 2-degrees of freedom compliant parallel micromanipulator (CPM) utilizing flexure joints is proposed for two-dimensional nanomanipulation in this paper. By a proper selection of actuators, flexure hinges, and materials, this system is constructed and analyzed by a pseudorigid-body model, architectural optimization, and finite-element analysis. Both the position and velocity kinematic modelings are established, and afterwards, statics analysis is performed. In view of the physical constraints imposed by pizeo-actuators and flexure hinges, the CPM's workspace area is determined. And in order to achieve a maximum workspace subjected to the given dexterity indices, kinematic optimization of the design parameters is carried out, which results in a manipulator satisfying the operational requirements. Furthermore, the finite-element analysis has been undertaken to validate the analytical modeling, and the influence of architectural parameters on CPM performance has been evaluated as well. Note to Practitioners-This paper is motivated by the problem of designing a nanomanipulator for two-dimensional (2-D) assembly of nanoscale objects via nanomanipulation. A novel planar parallel mechanism incorporating compliant mechanisms is designed for such a purpose. Since the application of the manipulator depends significantly on the kinematic mathematical models, the designed compliant parallel micromanipulator (CPM) is analyzed by the established pseudorigid-body (PRB) model. The architectural optimization leads to a CPM satisfying the workspace and resolution requirements of this work. Moreover, finite-element analysis is performed to verify the accuracy of the developed PRB model, and simulation results illustrate the efficiency of the PRB model in designing and analyzing the CPM. Since the designed CPM is composed solely of flexural elements which are known to be competent in high precise applications, it is reasonable to expect that the CPM could find its way into 2-D manipulation of nanoscale components.

Analysis and synthesis of compliant mechanisms has recently been the subject of significant study in the research community. This focus has led to a number of design approaches for developing compliant mechanisms. This paper describes the value of using the Pseudo-Rigid-Body Model (PRBM) to design compliant mechanisms for commercial products. Application of the PRBM is illustrated through the development of two parallel mechanisms: a bicycle derailleur and parallel-motion bicycle brakes. The PRBM allows compliant mechanisms to be modeled and analyzed as rigid-body mechanisms and significantly reduces the complexity of analysis. Mechanisms with straightforward properties are used to demonstrate the use of the PRBM to design commercially viable compliant mechanisms for required motion and force-deflection characteristics.

This paper discusses one type of commonly used parallel manipulator mechanism for the generation of micro-motion. This mechanism is designed as a compliant mechanism. The design and control of such a compliant mechanism is an important issue. This paper focuses on kinematic issues with consideration of future real-time control of the system. In particular, a constant-Jacobian method to approximate the kinematics, which is based on a pseudo rigid body model of the compliant mechanism, is further validated. This validation is based on the difference between this approximate method and the finite element method to the actual device, for an actuator range of 0–15 μm. The computational time with this approximate method is nearly 50 times less than that with the finite element method. It is expected that this approximation method will be far superior to the finite element method in terms of real-time control.

摘要: 基于伪刚体模型,综合考虑平面柔顺机构中柔性杆件的横向变形和轴向变形影响,提出具有移动副的两自由度伪刚体新模型。分别用移动副和转动副描述柔顺杆件的轴向位移和横向位移,模拟末端受力和力矩复合载荷作用时柔顺杆的变形,建立平面柔顺机构的PR伪刚体模型,通过三维搜索得出了模型的最优特征半径系数,应用线性回归方法得到了模型的刚度系数。通过与1R、2R伪刚体模型以及柔顺杆的数值算例对比,说明了PR伪刚体模型的优越性。

Compliant constant-force linear-motion mechanism

We report on the accuracy of the pseudo-rigid-body model (PRBM) in predicting the behavior of a nanoscale parallel-guiding mechanism (nPGM) that uses two single-walled (5,5) carbon nanotubes (CNTs) as the flexural guiding elements. The nPGM has two regions of behavior: region 1 is governed by the bulk deformation of the nanotubes, and region 2 is characterized by hingelike flexing of four “kinks” that occur due to buckling of the nanotube walls. PRBM parameters for (5,5) CNTs are proposed. Molecular simulation results of region 1 behavior match PRBM predictions of (1) kinematic behavior with less than 7.3% error and (2) elastomechanic behavior with less than 5.7% error. Although region 1 is of more interest because of its well-defined and stable nature, region 2 motion is also investigated. We show that the PRBM parameters are dependent on the selection of the effective tube thickness and moment of inertia, the lesson being that designers must take care to consider the thickness and moment of inertia values when deriving PRBM constants.

Piezoelectric actuators (PEAs) and compliant parallel mechanisms (CPMs) are advantageous for designing nanopositioning stages (NPSs) with multiple degrees of freedom (multi-DOFs). This paper proposes a new NPS that uses PEAs and CPMs with multiple spatial DOFs. First, the design of the mechanism is introduced. Six parallel kinematics revolute-revolute-revolute-revolute (RRRR) branched chains were used to create a 6-RRRR CPM for superior mechanical performance. Three in-plane and three out-of-plane chains were combined using a two-in-one structure to ensure fabrication feasibility. A two-in-one 6-RRRR CPM was employed to build the proposed NPS. Second, the mechanical performance was analyzed. High-efficiency finite-element modeling approaches were derived using the compliance-based matrix method (CMM) and a pseudo-rigid body model (PRBM). The model included both 6-RRRR CPM and NPS. The simulation results validated the static and dynamic performance, and the experimental results verified the kinematics. Based on the newly designed mechanism and verified mechanical performance, the proposed 6-RRRR NPS contributes to the development of spatial multi-DOF NPSs using PEAs and CPMs.

A parameter optimization framework for determining the pseudo-rigid-body model of cantilever-beams

Mechanical components in a robotic system were used to provide body structure and mechanism to achieve physical motions following the commands from electronic controller. This kind of robotic system utilizes complex hardware and firmware for sensing and planning. To reduce computational cost and increase reliability for a robotic system, employing mechanical components to fully or partially take over control tasks is a promising way, which is also referred to as “mechanical intelligence” (MI). This paper proposes a shape memory alloy driven robot capable of using a reciprocating motion to crawl over a surface without any use of electronic controller. A mechanical logic switch is designed to determine the activation timing for a pair of antagonistic shape memory alloy (SMA) actuators. Meanwhile, a compliant pre-strain bistable mechanism is introduced to cooperate with the SMA actuators achieving reliable reciprocating motion between the two stable positions. The SMA actuator is modeled base on a static two-state theory while the bistable mechanism is described by combining a pseudo-rigid-body model (PRBM) with a Bi-beam constraint model (Bi-BCM). Following this, the design parameters of the bistable mechanism and SMA actuators are determined according to theoretical simulations. Finally, a robotic prototype is fabricated using anisotropic friction on its feet to convert the reciprocating motion of the actuator to uni-directional locomotion of the robot body over a surface. Experiments are carried out to validate the presented design concept and the modeling methods.

The design of an effective hand-exercising device is based on an existing study of the force-deflection behavior of the human hand. This paper presents a design methodology using a compliant mechanism construct, for generating the desired force-deflection profile as the output. This is made possible by the integration of a rigid cam profile segment. The compliant segments serve as the followers, and their material and geometric properties serve as design variables. The force-deflection profile utilized was developed through experimental studies conducted on the human hand, along with a mathematical model that predicts the maximum grip force as a function of the handle’s diameter. A procedure is proposed herein that would allow the use of various force-deflection profiles, to be able to change the resistance level in order to meet individual requirements. The synthesis results obtained are investigated for cam-follower non-interference using a novel pseudo-rigid-body model (PRBM) approach and verified by finite element analysis. The exercise devices generally ignore in their conceptualization and design the anatomical mechanical advantage. This methodology, owing to the nature of the experiment, duly regards the variable mechanical advantage characteristic of the hand in different positions naturally.

Soft robots have advantages such as low weight and compact size compared to rigid robots. Variable stiffness is one of the key methods of improving the performance of a soft robot. The soft gripper grasps objects of various shapes or sizes based on the variable stiffness. In a previous study, we validated the variable stiffness mechanism where flexible and rigid segments were connected alternately in series. This paper presents a soft variable stiffness gripper that can be used to control the stiffness by pulling tendons. The soft gripper has three variable stiffness structures acting as fingers and the stiffness can be controlled using two motors by winding tendons. To understand the tendency of the stiffness variation and determine the design parameters, a compliant mechanism was developed using a pseudo-rigid-body model (PRBM). The experimental results show that the difference between the lowest and highest stiffness values of the fabricated variable stiffness gripper was 5.6 times the original. Similarly, the difference in the gripping weight was 19 times. Using the experimental results, the variable stiffness gripper can be designed and manufactured based on the required stiffness and used to grip various types of objects.

A three-dimensional wide curve is a spatial curve with variable cross sections. This paper introduces a geometric synthesis method for spatial compliant mechanisms by using three-dimensional wide curves. In this paper, every connection in a spatial compliant mechanism is represented by a three-dimensional wide curve and the whole spatial compliant mechanism is modeled as a set of connected three-dimensional wide curves. The geometric synthesis of a spatial compliant mechanism is considered as the generation and optimal selection of control parameters of the corresponding three-dimensional parametric wide curves. The deformation and performance of spatial compliant mechanisms are evaluated by the isoparametric degenerate-continuum nonlinear finite element procedure. The problem-dependent objectives are optimized and the practical constraints are imposed during the optimization process. The optimization problem is solved by the MATLAB constrained nonlinear programming algorithm. The effectiveness of the proposed geometric procedures is verified by the demonstrated examples.

Effects of joint clearance on the dynamics of a partly compliant mechanism: Numerical and experimental studies