A Methodology to Design a Variable Resistance Hand Exerciser Using a Compliant Mechanism

The design of the canopy utilizes the conventional rigid body mechanisms which is vulnerable to the presence of backlash, friction of joints or wearing of mechanical parts which lead to short product life. Compliant mechanisms are employed to reduce these mechanical problems, owing to their zero-joint and monolithic structure. A reference design for the conventional canopy was chosen and modified through reviewing different patent designs. Six different configurations of the pseudo-rigid-body model (PRBM) were constructed, and the best configuration was selected. Kinematic synthesis with function generation was performed for the chosen PRBM using MATLAB. The obtained results from the kinematic synthesis were then used to calculate the dimensions and stresses of the flexural pivots for the compliant stretcher mechanism. Finite Element Analysis (FEA) simulation was then performed on each of the models and the obtained flexural pivot stresses were compared with that of the PRBM. This research successfully replaces all the rigid joints and links of the stretcher mechanism of the conventional canopy to form a monolithic structure of compliant stretcher mechanism.

This work introduces an interior contact-aided rolling element (I-CORE) compliant mechanism that draws upon the concepts used for the contact-aided rolling element, cross-axis flexural pivot, and pre-curved flexible beam. The I-CORE incorporates a bilinear compressive stiffness response with an initial tailorable stiffness governed by the flexural geometry, followed by a stiffness curve governed by the material stiffness at the contact point. The I-CORE mechanism can achieve one or two degrees of rotational freedom as well as a single degree of translational freedom. The purpose of the present work was to introduce the I-CORE mechanism, as well as a pseudo-rigid-body replacement model (PRBM) of the I-CORE mechanism which was subsequently validated using both finite element analysis and benchtop mechanical testing. A pseudo-rigid body model was created for the I-CORE to simplify the rapid adaptation of this mechanism to different design applications. This model was validated using both finite element analysis and benchtop mechanical testing under both compression and rotation loading conditions. Additionally, multiple configurations of the device were created and evaluated in order to test its sensitivity to certain design features including the flexure width, flexure thickness, and the radius of the rounded contact surfaces. It was found that the model is sensitive to the thickness of the flexures and that despite some limitations, the pseudo-rigid body model is sufficiently accurate for initial design work. Some possible applications of the mechanism are proposed.

Compliant Mechanisms (CMs) are currently employed in several engineering applications requiring high precision and reduced number of parts. For a given mechanism topology, CM analysis and synthesis may be developed resorting to the Pseudo–Rigid Body (PRB) method, in which the behavior of flexible members is approximated via a series of rigid links connected by spring-loaded kinematic pairs. From a CM analysis standpoint, the applicability of a generic PRB model requires the determination of the kinematic pairs’ location and the stiffness of a set of generalized springs. In parallel, from a design standpoint, a PRB model representing the kinetostatic behavior of a flexible system should allow to compute the flexures’ characteristics providing the desired compliance. In light of these considerations, this paper describes a Computer-Aided Design/Engineering (CAD/CAE) framework for the automatic derivation of accurate PRB model parameters, on one hand, and for the shape optimization of complex-shape flexures comprising out-of-plane displacements and distributed compliance. The method leverages on the modelling and simulation capabilities of a parametric CAD (i.e. PTC Creo) seamlessly connected to a CAE tool (i.e. RecurDyn), which provides built-in functions for modelling the motion of flexible members. The method is initially validated on an elementary case study taken from the literature. Then, an industrial case study, which consists of a spatial crank mechanism connected to a fully-compliant four-bar linkage is discussed. At first, an initial sub-optimal design is considered and its PRB representation is automatically determined. Secondly, on the basis of the PRB model, several improved design alternatives are simulated. Finally, the most promising design solution is selected and the dimensions of a flexure with non-trivial shape (i.e. hybrid flexure) is computed. This technique, which combines reliable numerical results to the visual insight of CAD/CAE tools, may be particularly useful for analyzing/designing spatial CMs composed of complex flexure topologies.

This paper presents a compliant mechanism that can generate a wide range of force-deflection profiles. This partially compliant mechanism is comprised of a wedge cam with a compliant follower. The designer specifies the material and geometric properties of the compliant segment, as well as a desired force-deflection profile. A cam surface is then synthesized that helps generate this profile. The synthesis method is validated experimentally with the help of two case studies. Some possible areas of application include robotics, variable stiffness actuators, electrical connectors, design for automotive crashworthiness, and variable resistance exercise equipment.

A new 2-degrees of freedom compliant parallel micromanipulator (CPM) utilizing flexure joints is proposed for two-dimensional nanomanipulation in this paper. By a proper selection of actuators, flexure hinges, and materials, this system is constructed and analyzed by a pseudorigid-body model, architectural optimization, and finite-element analysis. Both the position and velocity kinematic modelings are established, and afterwards, statics analysis is performed. In view of the physical constraints imposed by pizeo-actuators and flexure hinges, the CPM's workspace area is determined. And in order to achieve a maximum workspace subjected to the given dexterity indices, kinematic optimization of the design parameters is carried out, which results in a manipulator satisfying the operational requirements. Furthermore, the finite-element analysis has been undertaken to validate the analytical modeling, and the influence of architectural parameters on CPM performance has been evaluated as well. Note to Practitioners-This paper is motivated by the problem of designing a nanomanipulator for two-dimensional (2-D) assembly of nanoscale objects via nanomanipulation. A novel planar parallel mechanism incorporating compliant mechanisms is designed for such a purpose. Since the application of the manipulator depends significantly on the kinematic mathematical models, the designed compliant parallel micromanipulator (CPM) is analyzed by the established pseudorigid-body (PRB) model. The architectural optimization leads to a CPM satisfying the workspace and resolution requirements of this work. Moreover, finite-element analysis is performed to verify the accuracy of the developed PRB model, and simulation results illustrate the efficiency of the PRB model in designing and analyzing the CPM. Since the designed CPM is composed solely of flexural elements which are known to be competent in high precise applications, it is reasonable to expect that the CPM could find its way into 2-D manipulation of nanoscale components.

This paper presents a novel piezoelectric XY micro-displacement scanning stage (MDSS), which features a parallel structure based on compliant mechanisms and has a compact configuration. Since the coupling problem between two motion axes, an innovative elliptical compliant restraint mechanism (ECRM) with a compact layout is proposed and utilized in XY MDSS to obtain high motion accuracy. And the XY MDSS can realize compact structure and lower input stiffness for a large workspace owing to the ECRM simultaneously. Due to the limited displacement of the piezoelectric stack actuator, compliant amplification mechanism is applied to achieve a large stroke. In order to estimate the static and dynamic characteristics theoretically, Castigliano’s second theorem and Lagrange’s method are utilized to establish the analytical models of the newfangled ECRM, compliant amplification mechanism, and XY MDSS. The finite element analysis and experimental tests are carried out to evaluate the performances of XY XDSS, and the results are all in correspondence with analytic solutions, which further validate the correctness of the analytical modeling methodologies. Experimental results show that the XY MDSS can realize a workspace of 58.8 μm × 51.5 μm with a resonance frequency of 576.5 Hz and nanometer-level resolution. The effectiveness of the designed ECRM is also proved simultaneously, which could well limit the coupling motion. The theoretical studies, finite element analysis, and experimental testing all demonstrate that the designed XY MDSS with ECRM has good performance while having a compact structure.

Analysis and synthesis of compliant mechanisms has recently been the subject of significant study in the research community. This focus has led to a number of design approaches for developing compliant mechanisms. This paper describes the value of using the Pseudo-Rigid-Body Model (PRBM) to design compliant mechanisms for commercial products. Application of the PRBM is illustrated through the development of two parallel mechanisms: a bicycle derailleur and parallel-motion bicycle brakes. The PRBM allows compliant mechanisms to be modeled and analyzed as rigid-body mechanisms and significantly reduces the complexity of analysis. Mechanisms with straightforward properties are used to demonstrate the use of the PRBM to design commercially viable compliant mechanisms for required motion and force-deflection characteristics.

Soft robots have advantages such as low weight and compact size compared to rigid robots. Variable stiffness is one of the key methods of improving the performance of a soft robot. The soft gripper grasps objects of various shapes or sizes based on the variable stiffness. In a previous study, we validated the variable stiffness mechanism where flexible and rigid segments were connected alternately in series. This paper presents a soft variable stiffness gripper that can be used to control the stiffness by pulling tendons. The soft gripper has three variable stiffness structures acting as fingers and the stiffness can be controlled using two motors by winding tendons. To understand the tendency of the stiffness variation and determine the design parameters, a compliant mechanism was developed using a pseudo-rigid-body model (PRBM). The experimental results show that the difference between the lowest and highest stiffness values of the fabricated variable stiffness gripper was 5.6 times the original. Similarly, the difference in the gripping weight was 19 times. Using the experimental results, the variable stiffness gripper can be designed and manufactured based on the required stiffness and used to grip various types of objects.

摘要: 基于伪刚体模型,综合考虑平面柔顺机构中柔性杆件的横向变形和轴向变形影响,提出具有移动副的两自由度伪刚体新模型。分别用移动副和转动副描述柔顺杆件的轴向位移和横向位移,模拟末端受力和力矩复合载荷作用时柔顺杆的变形,建立平面柔顺机构的PR伪刚体模型,通过三维搜索得出了模型的最优特征半径系数,应用线性回归方法得到了模型的刚度系数。通过与1R、2R伪刚体模型以及柔顺杆的数值算例对比,说明了PR伪刚体模型的优越性。

This paper discusses one type of commonly used parallel manipulator mechanism for the generation of micro-motion. This mechanism is designed as a compliant mechanism. The design and control of such a compliant mechanism is an important issue. This paper focuses on kinematic issues with consideration of future real-time control of the system. In particular, a constant-Jacobian method to approximate the kinematics, which is based on a pseudo rigid body model of the compliant mechanism, is further validated. This validation is based on the difference between this approximate method and the finite element method to the actual device, for an actuator range of 0–15 μm. The computational time with this approximate method is nearly 50 times less than that with the finite element method. It is expected that this approximation method will be far superior to the finite element method in terms of real-time control.

This chapter presents the design of parallel-kinematic nanopositioning stages with large workspace and low crosstalk. Based on compliant Roberts mechanism, the design of multi-axis parallel compliant stage is synthesized. A new XY nanopositioning stage is studied in detail. Pseudo-rigid-body model (PRBM) is developed to build the quantitative models of the compliant Roberts mechanisms. In addition, finite-element analysis (FEA) is carried out to validate its performance. A prototype is fabricated and tested through experimental studies. Results show that the XY stage delivers a work range larger than 12 mm in each axis. Moreover, the parasitic motion of the stage in the non-working direction is less than 1.7 % of the motion stroke. It indicates that the designed stage meets the requirements of a large stroke and high precision linear guiding mechanism, which demonstrates the feasibility of the proposed design ideas using the Roberts mechanism. Moreover, a feedback control using PID control algorithm is implemented to demonstrate the positioning performance of the developed XY stage. The reported ideas can also be extended to the design and control of other types of micro-/nanopositioning systems.

Compliant constant-force linear-motion mechanism

We report on the accuracy of the pseudo-rigid-body model (PRBM) in predicting the behavior of a nanoscale parallel-guiding mechanism (nPGM) that uses two single-walled (5,5) carbon nanotubes (CNTs) as the flexural guiding elements. The nPGM has two regions of behavior: region 1 is governed by the bulk deformation of the nanotubes, and region 2 is characterized by hingelike flexing of four “kinks” that occur due to buckling of the nanotube walls. PRBM parameters for (5,5) CNTs are proposed. Molecular simulation results of region 1 behavior match PRBM predictions of (1) kinematic behavior with less than 7.3% error and (2) elastomechanic behavior with less than 5.7% error. Although region 1 is of more interest because of its well-defined and stable nature, region 2 motion is also investigated. We show that the PRBM parameters are dependent on the selection of the effective tube thickness and moment of inertia, the lesson being that designers must take care to consider the thickness and moment of inertia values when deriving PRBM constants.

Actuators based on smart materials generally exhibit a tradeoff between force and stroke. Researchers have surrounded piezoelectric materials (PZT’s) with complaint structures to magnify either their geometric or mechanical advantage. Most of these designs are literally built around a particular piezoelectric device, so the design space consists of only the compliant mechanism. Materials scientists researchers have demonstrated the ability to pole a PZT in an arbitrary direction, and some engineers have taken advantage of this to build “shear mode” actuators. The goal of this work is to determine if the performance of compliant mechanisms improves by the inclusion of the piezoelectric polarization as a design variable. The polarization vector is varied via transformation matrixes, and the compliant actuator is modeled using the SIMP (Solid Isotropic Material with Penalization) or “power-law method.” The concept of mutual potential energy is used to form an objective function to measure the piezoelectric actuator’s performance. The optimal topology of the compliant mechanism and orientation of the polarization method are determined using a sequential linear programming algorithm. This paper presents a demonstration problem that shows small changes in the polarization vector have a marginal effect on the optimum topology of the mechanism, but improves actuation.

While nonlinear-elastic materials demonstrate potential in enhancing the performance of compliant mechanisms, their behavior still needs to be captured in a generalized mechanical model. To inform new designs and functionality of compliant mechanisms, a better understanding of nonlinear-elastic materials is necessary and, in particular, their mechanical properties that often differ in tension and compression. In the current work, a beam-based analytical model incorporating nonlinear-elastic material behavior is defined for a folding compliant mechanism geometry. Exact equations are derived capturing the nonlinear curvature profile and shift in the neutral axis due to the material asymmetry. The deflection and curvature profile are compared with finite element analysis along with stress distribution across the beam thickness. The analytical model is shown to be a good approximation of the behavior of nonlinear-elastic materials with tension–compression asymmetry under the assumptions of the von Kármán strain theory. Through a segmentation approach, the geometries of a semicircular arc and folding compliant mechanism design are defined. The deflection of the folding compliant mechanism due to an applied tip load is then evaluated against finite element analysis and experimental results. The generalized methods presented highlight the utility of the model for designing and predicting the behavior of other compliant mechanism geometries and different nonlinear-elastic materials.