A Collaborative Filtering Recommendation System for Rating Prediction

An effective collaborative movie recommender system with cuckoo search

Globally, wind energy if properly harnessed, could serve as a source of energy generation in Africa. This study compared the performance of two Machine Learning (ML) algorithms (Linear regression and Random Forest) in predicting wind speed in five major cities in Africa (Yaoundé, Pretoria, Nairobi, Cairo and Abuja). Wind data were collected between January 1, 2000, and December 31, 2022, using the Solar Radiation Data Archive. The data preprocessing was carried out with 80% of the data used for training and 20% for validation. The performance of these ML algorithms was evaluated using Mean Square Error (MSE), Root Mean Square Error (RMSE), Mean Absolute Error (MAE), Mean Absolute Percentage Error (MAPE) and coefficient of determination (R2). The result shows that Nairobi (3.814795 m/s) closely followed by Cairo (3.606453 m/s) has the highest mean wind speed while Yaoundé (1.090512 m/s) has the lowest. Based on the performance metrics used, the two Machine Learning algorithms were competitive. Still, the Linear Regression (LR) algorithm outperformed the Random Forest Algorithm in predicting wind speed in all the selected major African cities. In Yaoundé (RMSE = 0.3892, MAE= 0.3001, MAPE =0.5030), Pretoria (RMSE=1.2339, MAE=0.9480, MAPE=0.7450) Nairobi (RMSE= 0.4223, MAE =0.6499, MAPE =0.1872), Nairobi (RMSE=0.6499, MAE=0.5171, MAPE =0.1872), Cairo (RMSE =1.0909, MAE =0.8544, MAPE =0.3541) and Abuja (RMSE = 0.70245, MAE =0.5441, MAPE= 0.4515) the Linear regression algorithms was found to outperformed Random Forest Regression. Therefore, the Linear regression algorithm is more reliable in predicting wind speed compared with the Random Forest regression.

This article uses machine learning techniques as fuzzy and neuro-fuzzy ANFISs, to develop and compare prediction models capable of relating pregnant women’s exposure to air pollutants, such as Nitrogen Dioxide and Particulate Matter, the mother’s age, and the number of prenatal consultations to the incidence of premature birth. In the current literature, studies can be found that relate prematurity to the exposure of pregnant women to NO2, O3, and PM10; to Toluene and benzene, mainly in the window 5 to 10 days before birth; and to PM10 in the week before birth. Both models used logistic regression to quantify the effects of pollutants as a result of premature birth. Datasets from Brazil—Departamento de Informatica do Sistema Único de Saúde (DATASUS) and Companhia Ambiental do Estado de São Paulo (CETESB)—were used, covering the period from 2016 to 2018 and comprising women living in the city of São José dos Campos (SP), Brazil. In order to evaluate and compare the different techniques used, evaluation metrics were calculated, such as correlation (r), coefficient of determination (R2), Root Mean Square Error (RMSE), Mean Absolute Percentage Error (MAPE), Mean Square Error (MSE), and Mean Absolute Error (MAE). These metrics are widely used in the literature due to their ability to evaluate the robustness and efficiency of prediction models. For the RMSE, MAPE, MSE, and MAE metrics, lower values indicate that prediction errors are smaller, demonstrating better model accuracy and confidence. In the case of (r) and R2, a positive and strong result indicates alignment and better performance between the real and predicted data. The neuro-fuzzy ANFIS model showed superior performance, with a correlation (r) of 0.59, R2 = 0.35, RMSE = 2.83, MAPE = 5.35%, MSE = 8.00, and MAE = 1.70, while the fuzzy model returned results of r = 0.20, R2 = 0.04, RMSE = 3.29, MSE = 10.81, MAPE = 6.67%, and MAE = 2.01. Therefore, the results from the ANFIS neuro-fuzzy system indicate greater prediction capacity and precision in relation to the fuzzy system. This superiority can be explained by integration with neural networks, allowing data learning and, consequently, more efficient modeling. In addition, the findings obtained in this study have potential for the formulation of public health policies aimed at reducing the number of premature births and promoting improvements in maternal and neonatal health.

The increasing demand for personalized information has resulted in the development of the Recommender System (RS). RS has been widely utilized and broadly studied to suggest the interests of users and make an appropriate recommendation. This paper gives an overview of several types of recommendation approaches based on user preferences, ratings, domain knowledge, users demographic data, users context and also lists the advantages and disadvantages of each RS approach. In this paper, we also proposed the movie recommendation based on collaborative filtering and singular value decomposition plus-plus (SVD++). The proposed approach is compared with well-known machine learning approaches namely k nearest neighbor (K-NN), singular value decomposition (SVD) and Co-clustering. The proposed approach is experimentally verified using MovieLens 100 K datasets and error of the RS is measured using Root Mean Square Error (RMSE) and Mean Absolute Error (MAE). The result shows that the proposed approach gives a lesser error rate with RMSE (0.9201) and MAE (0.7219). This approach also overcomes cold-start, data sparsity problems and provides them relevant items and services.

Nowadays , nonlinear time series and artificial neural networks (ANN) models are used for forecasting in the field of business, agriculture and soon. Recent studies have shown, ANN have been successfully used for forecasting of financial and agriculture data series The classical methods used for time series prediction like Box-Jenkins or ARIMA assumes that there is a linear relationship between inputs and outputs. ANN have more advantages that can approximate to model both linear and nonlinear structures in time series, they are not able to handling both structures equally well. The autoregressive integrated moving average (ARIMA) model and two ANN models namely, Radial basis function neural networks (RBFNN), and Elman recurrent neural networks (ERNN) methods were applied to Hyderabad airport traffic data. The data obtained for 15 years from 2002–2003 to 2016–2017 about domestic and international passenger of International Airport of Hyderabad, India. In this research paper, we compared the performances of ARIMA, RBFNN and ERNN were based on three measures: mean absolute error (MAE), mean absolute percentage error (MAPE), and root mean square error (RMSE). The results showed that RBFNN obtained the smallest MAE, MAPE and RMSE in both the modeling and forecasting processes. The performances of the three models ranked in ascending order were: ARIMA, ERNN and the RBFNN model. Keywords: T ime series, forecasting, artificial neural networks, ARIMA models, radial basis function neural networks, and Elman recurrent neural networks Cite this Article R. Ramakrishna, Berhe Aregay, Tewodros Gebregergs. The Comparison in Time Series Forecasting of Air Traffic Data by Autoregressive Integrated Moving Average Model, Radial Basis Function and Elman Recurrent Neural Networks. Research & Reviews: Journal of Statistics . 2018; 7(3): 75–90p.

Drought is a complex and frequently occurring natural hazard in many parts of the world. Therefore, accurate drought forecasting is essential to mitigate its adverse impacts. This research has inferred the implication and the appropriateness of the extreme learning machine (ELM) algorithm for drought forecasting. For numerical evaluation, time series data of the Standardized Precipitating Temperature Index (SPTI) are used for nine meteorological stations located in various climatological zones of Pakistan. To assess the performance of ELM, this research includes parallel inferences of multilayer perceptron (MLP) and autoregressive integrated moving average (ARIMA) models. The performance of each model is assessed using root mean square error (RMSE), mean absolute error (MAE), mean absolute percent error (MAPE), Kling‐Gupta efficiency (KGE), Willmott index (WI), and Karl Pearson’s correlation coefficient. Generally, graphical results illustrated an excellent performance of the ELM algorithm over MLP and ARIMA models. For training data of SPTI‐1, ELM’s best performance has observed at Chitral station (RMSE = 0.374, KGE = 0.838, WI = 0.960, MAE = 0.272, MAPE = 259.59, R = 0.93). For SPTI‐1 at Astore station, the numerical results are (RMSE = 0.688, KGE = 0.988, WI = 0.997, MAE = 0.798, MAPE = 247.35). The overall results indicate that the ELM outperformed by producing the smallest RMSE, MAE, and MAPE values and maximum values for KGE, WI, and correlation coefficient values at almost all the selected meteorological stations for (1, 3, 6, 9, and 12) month time scales. In summary, this research endorses the use of ELM for accurate drought forecasting.

Recommender systems are powerful tools that filter and recommend content/information relevant to a given user. Collaborative filtering is the most popular technique used in building recommender systems and it has been successfully incorporated in many applications. These conventional recommendation systems require a minimum number of users, items, and ratings in order to provide effective recommendations. This results in the infamous cold-start problem where the system is not able to produce effective recommendations for new users. Recently, there has been an escalation in the popularity and usage of social networks, which persuades people to share their experiences in the form of reviews and ratings on social media. The components of social media such as the influence of friends, interests, and enjoyment create the opportunities to develop solutions for sparsity and cold start problems of recommendation systems. This paper aims to observe these patterns and analyze three of the existing social recommendation systems, SocialMF, SocialFD, and GraphRec. SocialMF and SocialFD algorithms are based on matrix factorization and distance metric learning respectively whereas GraphRec is an attention based deep learning model. Through extensive experimentation with the datasets that these algorithms were tested on and one new dataset, we compared the results based on evaluation metrics including Root Mean Squared Error (RMSE) and Mean Absolute Error (MAE). To investigate how trust impacts the performance of these models, we evaluated them by modifying the trust and social component. Experimental results show that there is no conclusive evidence that trust propagation plays a major part in these models. Moreover, these models show a slightly improved performance in the absence of trust statements.

With the in-depth implementation of China’s “National Strategy for Building a Strong Transportation Network,” the scale of expressway construction has continued to expand. As a result, the number of high-fill and deep-cut subgrade projects under complex geological conditions has increased significantly, leading to a surge in landslide-related issues. Consequently, accurate prediction of slope displacement is of critical importance for early warning and prevention of landslide disasters. This study proposes a hybrid prediction model, VMD-MPA-LSSVM-LSTM (VMLL), which integrates Variational Mode Decomposition (VMD), Marine Predators Algorithm (MPA), Least Squares Support Vector Machine (LSSVM), and Long Short-Term Memory (LSTM) networks. Using monitoring data from the high-fill embankment slope at Hongtuyao as the research subject, the VMLL model is employed to predict slope displacement based on small-sample data. The objective is to provide a more accurate method for early warning of slope displacement. Firstly, the original monitoring data are decomposed into trend displacement components and fluctuation displacement components using Variational Mode Decomposition (VMD). Subsequently, the trend component and the fluctuation component are predicted using Least Squares Support Vector Machine (LSSVM) and Long Short-Term Memory (LSTM) networks, respectively. Finally, the Marine Predators Algorithm (MPA) is employed to optimize the hyperparameters of the predictive models. Based on this framework, a VMLL-based slope displacement prediction model is constructed. To verify the superiority of the VMLL model, a comparative analysis was conducted against LSSVM, LSTM, and the VMD-LSSVM-LSTM models. The results demonstrate that the VMLL model achieves the highest prediction accuracy, with a Mean Absolute Percentage Error (MAPE) of 0.4022%, a Mean Absolute Error (MAE) of 0.016 mm, a Root Mean Square Error (RMSE) of 0.0206 mm, a coefficient of determination (R²) of 94.08%, and a Variance Accounted For (VAF) of 96.5%. Compared with the other three models, the VMLL model reduces the MAPE, MAE, and RMSE by 30.41–67.62%, 30.38–67.40%, and 27.32–71.00%, respectively. Meanwhile, it improves the R² and VAF by 5.95–217.51% and 0.38–11.48%, respectively. These improvements clearly demonstrate that the VMLL model outperforms the other models, indicating its significant advantage over single prediction models. Furthermore, three additional datasets were used to evaluate the model’s performance. The average values of the performance evaluation metrics for these datasets were 0.6207% (MAPE), 0.0238 mm(MAE), 0.0273 mm(RMSE), 90.33%(R²), and 96.81%(VAF), respectively. These results demonstrate the high accuracy and strong robustness of the proposed model in predicting both horizontal displacement and vertical settlement of slopes, providing a reliable methodological framework for slope stability assessment and landslide disaster early warning.

Evaluation of artificial neurocomputing algorithms and their metacognitive robustness in predictive modeling of fuel consumption rates during tillage

Advances in industrial digital technologies have led to an increasing volume of data generated from industrial bioprocesses, which can be utilised within data-driven models (DDM). However, data volume and variability complications make developing models that captures the underlying biological nature of the bioprocesses challenging. In this study, a framework for developing data-driven models of bioprocesses is proposed and evaluated by modelling an industrial bioprocess, which treats industrial or agrifood wastewaters whilst simultaneously generating bioenergy. Six models were developed to predict the reduction in chemical oxygen demand from the wastewater by the bioprocess and statistically evaluated using both testing data (randomly partitioned data from the model development) and unseen data (new data not used during the model development). The statistical error metrics employed were the coefficient of determination (R2), root mean square error (RMSE), mean absolute error (MAE) and mean absolute percentage error (MAPE). The stacked neural network model was best able to model the bioprocess, having the highest accuracy on the testing data (R2: 0.98; RMSE: 1.29; MAE: 2.27; MAPE: 4.08) and the unseen data (R2: 0.82; RMSE: 2.57; MAE: 1.75; MAPE: 3.68). Data visualisation is used to observe (or confirm) whether new data points are within the model boundaries, helping to increase confidence in the model’s predictions on future data.

Tomatoes are among the world’s most significant vegetables, both in terms of production and consumption. Harvesting takes place in tomato production when the important quality attribute of total soluble solids content reaches its maximum possible level. Tomato total soluble solids content (TSS) is among the most crucial attribute parameters for assessing tomato quality and for tomato commercialization. Determination of total soluble solids content by conventional measurement methods is both destructive and time-consuming. Therefore, the tomato processing industry needs a rapid identification method to measure total soluble solids content (TSS). In this study, we aimed to estimate how much soluble solids there are in beef tomato fruit by Artificial Neural Networks (ANN) and Multiple Linear Regression (MLR) methods. The models were assessed using the Coefficient of Determination (R2), Mean Absolute Error (MAE), Root Mean Square Error (RMSE), and Mean Absolute Percentage Error (MAPE) metrics. The training data set results of the MLR model established to estimate the amount of brix in tomato fruit, calculated as MAE: 0.2349, RMSE: 0.3048, R2: 0.8441, and MAPE: 5.5368, while, according to the ANN model, MAE: 0.0250, RMSE: 0.031, R2: 0.9982 and MAPE: 0.5814. According to the metric outcomes, the ANN-based model performed better in both the training and testing parts.

Compressive strength is an important mechanical property of high-strength concrete (HSC), but testing methods are usually uneconomical, time-consuming, and labor-intensive. To this end, in this paper, a long short-term memory (LSTM) model was proposed to predict the HSC compressive strength using 324 data sets with five input independent variables, namely water, cement, fine aggregate, coarse aggregate, and superplasticizer. The prediction results were compared with those of the conventional support vector regression (SVR) model using four metrics, root mean square error (RMSE), mean absolute error (MAE), mean absolute percentage error (MAPE), and correlation coefficient (R2). The results showed that the prediction accuracy and reliability of LSTM were higher with R2 = 0.997, RMSE = 0.508, MAE = 0.08, and MAPE = 0.653 compared to the evaluation metrics R2 = 0.973, RMSE = 1.595, MAE = 0.312, MAPE = 2.469 of the SVR model. The LSTM model is recommended for the pre-estimation of HSC compressive strength under a given mix ratio before the laboratory compression test. Additionally, the Shapley additive explanations (SHAP)-based approach was performed to analyze the relative importance and contribution of the input variables to the output compressive strength.

The necessity for sophisticated recommender systems in the movie recommendation sphere has become particularly pronounced, generating a more personalized movie recommendation due to people nowadays who like to watch movies online. Efficient recommender systems make use of advanced machine learning (ML) techniques in the pursuit of accurate and meaningful recommendations. This paper endeavours to give a comprehensive overview of technologies known as recommender systems, concentrating on ML methods found at the base. Different strategies have been applied in this work, which include collaborative filtering (CF), content-based filtering (CB), hybrid approaches, Generative AI and so on. The merits and demerits of each technique are listed and explained briefly. In addition, the actual application’s results are also presented in this paper. To evaluate the performance of the techniques, some of the important datasets that are used in evaluating recommender systems are also discussed along with measurement metrics to determine the effectiveness of technique. Example metrics used are Root Mean Square Error (RMSE), Mean Absolute Error (MAE) and so on. This paper synthesizes existing research to evaluate the advantages and limitations of diverse recommendation techniques, which aims to give suggestion on how to improve the design of movie recommendation systems so that the performance of the technique can be improved.

DNA methylation markers in combination with skeletal and dental ages to improve age estimation in children

Research on the theoretical prediction method for surface movement duration considering the spatio-temporal subsidence characteristics