A Compatible Framework for RGB-D SLAM in Dynamic Scenes

In indoor dynamic scenes, traditional visual simultaneous localization and mapping (SLAM) algorithms based on RGB-D cameras incorrectly use dynamic features to estimate the poses of the cameras, and do not fully utilize the geometric information in the scenes, resulting in the low positioning accuracy and robustness of SLAM systems. To solve this problem, this paper proposes an RGB-D SLAM algorithm based on multiple geometric features and semantic segmentation. The core of our SLAM system is the proposed robust exclusion method of dynamic point and line features. The method consists of the following three steps: (a) identify potential dynamic point features using motion consistency checks; (b) obtain potential motion regions via semantic segmentation, and then determine dynamic regions by combining these with dynamic point features; (c) remove point and line features in dynamic regions. The exclusion method of dynamic point and line features can be easily integrated into RGB-D SLAM systems for improving the accuracy and robustness of SLAM systems in dynamic scenes. Experimental results on the Technische Universität München (TUM) dataset demonstrate that the proposed algorithm has better positioning accuracy and stability than the original dynamic semantic (DS-SLAM) algorithm in dynamic environments. The effectiveness of the proposed algorithm is verified by comparison with other classical visual SLAM algorithms. Better mapping performance is achieved by this proposed algorithm in actual indoor scenes.

Simultaneous Localization and Mapping (SLAM) plays an important role in the computer vision and robotics field. The traditional SLAM framework adopts a strong static world assumption for analysis convenience. How to cope with dynamic environments is of vital importance and attracts more attentions. Existing SLAM systems toward dynamic scenes either solely utilize semantic information, solely utilize geometry information, or naively combine the results from them in a loosely coupled way. In this paper, we present SOF-SLAM: Semantic Optical Flow SLAM, a visual semantic SLAM system toward dynamic environments, which is built on RGB-D mode of ORB-SLAM2. A new dynamic features detection approach called semantic optical flow is proposed, which is a kind of tightly coupled way and can fully take advantage of feature's dynamic characteristic hidden in semantic and geometry information to remove dynamic features effectively and reasonably. The pixel-wise semantic segmentation results generated by SegNet serve as mask in the proposed semantic optical flow to get a reliable fundamental matrix, which is then used to filter out the truly dynamic features. Only the remaining static features are reserved in the tracking and optimization module to achieve accurate camera pose estimation in dynamic environments. Experiments on public TUM RGB-D dataset and in real-world environment are conducted. Compared with ORB-SLAM2, the proposed SOF-SLAM achieves averagely 96.73% improvements in high-dynamic scenarios. It also outperforms the other four state-of-the-art SLAM systems which cope with the dynamic environments.

• Design a self-attention aggregation module using a pre-trained diffusion model. • Integrate high-precision masks into RGB-D SLAM for robust dynamic tracking. • Validate superior accuracy and efficiency on dynamic simulation datasets. In dynamic environments, performing RGB-D SLAM (Simultaneous Localization and Mapping) faces significant challenges primarily due to the presence of moving objects. The motion of these objects can introduce tracking errors and inaccuracies in map construction, thereby compromising the stability and overall performance of the system. To maintain high-precision localization and mapping under such conditions, a SLAM system must effectively detect and handle dynamic objects. To address these challenges, this paper presents a novel RGB-D SLAM method, referred to as DMSAA-SLAM (Dynamic Scene SLAM Based on Diffusion Model Self-Attention Aggregation). The core idea is to leverage a pre-trained stable diffusion model, particularly its self-attention layers, to handle the complexity of dynamic scenes. By employing a multi-resolution aggregation approach, combined with iterative merging and nonmaximum suppression, the proposed method generates high-precision segmentation masks. These masks enable fine-grained segmentation of moving objects and effectively eliminate dynamic feature points, thereby mitigating the impact of dynamic elements on the SLAM process and ensuring efficient and accurate tracking and mapping.

Current visual simultaneous localization and mapping (SLAM) systems have demonstrated commendable efficacy in static environments. However, the presence of dynamic objects in real-world settings frequently leads to system discrepancies, significantly impairing the accuracy and robustness of SLAM systems. Conventional visual SLAM approaches typically utilize epipolar constraints to mitigate the impact of outliers; nevertheless, they encounter limitations when confronted with a substantial number of dynamic or planar moving objects. To tackle these issues, this paper introduces a novel dynamic visual SLAM system, termed DEG-SLAM. Initially, the system employs the YOLOv5 object detection network to identify dynamic objects, subsequently relaying the semantic information to the tracking module. During the tracking phase, both semantic information and epipolar constraints are leveraged to filter out dynamic feature points. To address the challenges posed by the malfunctioning of epipolar constraints in degenerate scenes, DEG-SLAM incorporates a degenerate constraint mechanism aimed at further eliminating dynamic feature points. Furthermore, a reprojection constraint has been introduced to enhance the filtering of absent dynamic feature points that lie outside the detection boxes. Experimental findings reveal that DEG-SLAM significantly improves accuracy and robustness when compared to traditional ORB-SLAM3 in dynamic environments. The performance benefits of DEG-SLAM are particularly evident in degenerate scenarios, thereby affirming its practicality and reliability in complex settings.

Simultaneous Localization and Mapping (SLAM) technology has important implications for the autonomous navigation of intelligent mobile robots. In the past few years, many excellent visual SLAM systems were born, and most of them can do a good job in a static environment. However, in dynamic scenes, unreliable feature points in the scene will lead to the decline of system positioning accuracy and even cause system failure. Traditional methods often use the removal of dynamic points to solve dynamic scene problems, but in some environments, the reduction of feature points will also affect the positioning accuracy. Therefore, based on the ORB-SLAM2 visual SLAM system, this paper proposes a semantic point and line SLAM system for an indoor dynamic environment. The improved SLAM system has good performance in an indoor dynamic environment. Finally, we evaluate our algorithm on the TUM RGB-D dynamic dataset. The results show that the absolute Trajectory Accuracy of SPL-SLAM is significantly improved compared with the original ORB-SLAM2.

Typical visual simultaneous localization and mapping (SLAM) systems rely on purely geometric elements. Recently semantic SLAM has become popular due to its capability to obtain high-level understanding of the environment. However, most semantic SLAM systems merely aim to produce semantic maps rather than exploiting semantic constraints to boost the accuracy performance. In this paper, we propose a new RGB-D SLAM system for the use in indoor environments. Given that a ground plane represents a significant part of most indoor scenes, our new system exploit a semantic ground plane constraint inferred from a deep neural network along with geometric constraints on the state estimation to improve the performance. More specifically, we introduce a semantically meaningful geometric primitive, namely, a global ground plane to the optimization process of visual SLAM. The global ground model is able to provide an extra constraint on the state estimation through which both frame-to-keyframe and frame-to-model tracking processes are combined, and low-texture ground plane is effectively utilized. Experimental results for the TUM dataset and a real scene have demonstrated the improved performance brought by the semantic constraint in our method.

The demand for 4D ( 3D+time ) SLAM system is increasingly urgent, especially for decision-making and scene understanding. However, most of the existing simultaneous localization and mapping ( SLAM ) systems primarily assume static environments. They fail to represent dynamic scenarios due to the challenge of establishing robust long-term spatiotemporal associations in dynamic object tracking. We address this limitation and propose CTO-SLAM, a monocular and RGB-D object-level 4D SLAM system to track moving objects and estimate their motion simultaneously. In this paper, we propose contour tracking, which introduces contour features to enhance the keypoint representation of dynamic objects and coupled with pixel tracking to achieve long-term robust object tracking. Based on contour tracking, we propose a novel sampling-based object pose initialization algorithm and the following adapted bundle adjustment ( BA ) optimization algorithm to estimate dynamic object poses with high accuracy. The CTO-SLAM system is verified on both KITTI and VKITTI datasets. The experimental results demonstrate that our system effectively addresses cumulative errors in long-term spatiotemporal association and hence obtains substantial improvements over the state-of-the-art systems. The source code is available at https://github.com/realXiaohan/CTO-SLAM.

Simultaneous localization and mapping (SLAM) techniques are widely researched, since they allow the simultaneous creation of a map and the sensors’ pose estimation in an unknown environment. Visual-based SLAM techniques play a significant role in this field, as they are based on a low-cost and small sensor system, which guarantees those advantages compared to other sensor-based SLAM techniques. The literature presents different approaches and methods to implement visual-based SLAM systems. Among this variety of publications, a beginner in this domain may find problems with identifying and analyzing the main algorithms and selecting the most appropriate one according to his or her project constraints. Therefore, we present the three main visual-based SLAM approaches (visual-only, visual-inertial, and RGB-D SLAM), providing a review of the main algorithms of each approach through diagrams and flowcharts, and highlighting the main advantages and disadvantages of each technique. Furthermore, we propose six criteria that ease the SLAM algorithm’s analysis and consider both the software and hardware levels. In addition, we present some major issues and future directions on visual-SLAM field, and provide a general overview of some of the existing benchmark datasets. This work aims to be the first step for those initiating a SLAM project to have a good perspective of SLAM techniques’ main elements and characteristics.

In this work, we present a comparative analysis of the trajectories estimated from various Simultaneous Localization and Mapping (SLAM) systems in a simulation environment for vineyards. Vineyard environment is challenging for SLAM methods, due to visual appearance changes over time, uneven terrain, and repeated visual patterns. For this reason, we created a simulation environment specifically for vineyards to help studying SLAM systems in such a challenging environment. We evaluated the following SLAM systems: LIO-SAM, StaticMapping, ORB-SLAM2, and RTAB-MAP in four different scenarios. The mobile robot used in this study equipped with 2D and 3D lidars, IMU, and RGB-D camera (Kinect v2). The results show good and encouraging performance of RTAB-MAP in such an environment.

The robot simultaneous localization and mapping (SLAM) is a very important and useful technology in the robotic field. However, the environmental map constructed by the traditional visual SLAM method contains little semantic information, which cannot satisfy the needs of complex applications. The semantic map can deal with this problem efficiently, which has become a research hot spot. This paper proposed an improved deep residual network- (ResNet-) based semantic SLAM method for monocular vision robots. In the proposed approach, an improved image matching algorithm based on feature points is presented, to enhance the anti-interference ability of the algorithm. Then, the robust feature point extraction method is adopted in the front-end module of the SLAM system, which can effectively reduce the probability of camera tracking loss. In addition, the improved key frame insertion method is introduced in the visual SLAM system to enhance the stability of the system during the turning and moving of the robot. Furthermore, an improved ResNet model is proposed to extract the semantic information of the environment to complete the construction of the semantic map of the environment. Finally, various experiments are conducted and the results show that the proposed method is effective.

Applications such as Simultaneous Localization and Mapping (SLAM) can greatly benefit from RGB-D sensor data to produce 3D maps of the environment as well as sensor’s trajectory estimation. However, the resulting 3D points map can be cumbersome, and since indoor environments are mainly composed of planar surfaces, the idea is to use planes as building blocks for a SLAM process. This paper describes an RGB-D SLAM system benefiting from planes segmentation to generate lightweight 3D plane-based maps. Our goal is to produce reduced 3D maps composed solely of planes sections that can be used on platforms with limited memory and computation resources. We present the introduction of planar regions in a regular RGB-D SLAM system and evaluate the benefits regarding both resulting map and estimated camera trajectory.

The question of is central in the context of dense simultaneous localization and mapping (SLAM). Learning-based approaches have the potential to leverage data or task performance to directly inform the representation. However, blending representation learning approaches with classical SLAM systems has remained an open question, because of their highly modular and complex nature. A SLAM system transforms raw sensor inputs into a distribution over the state(s) of the robot and the environment. If this transformation (SLAM) were expressible as a differentiable function, we could leverage task-based error signals over the outputs of this function to learn representations that optimize task performance. However, this is infeasible as several components of a typical dense SLAM system are non-differentiable. In this work, we propose ∇SLAM (gradSLAM), a methodology for posing SLAM systems as differentiable computational graphs, which unifies gradient-based learning and SLAM. We propose differentiable trust-region optimizers, surface measurement and fusion schemes, and raycasting, without sacrificing accuracy. This amalgamation of dense SLAM with computational graphs enables us to backprop all the way from 3D maps to 2D pixels, opening up new possibilities in gradient-based learning for SLAM1.

Simultaneous Localization and Mapping (SLAM) is a fundamental problem in mobile robotics. However, the majority of Visual SLAM algorithms assume a static scenario, limiting their applicability in real-world environments. Dealing with dynamic content in Visual SLAM is still an open problem, with solutions usually relying on direct or feature-based methods. Deep learning techniques can improve the SLAM solution in environments with a priori dynamic objects, providing high-level information of the scene. This paper presents a new approach to SLAM in human populated environments using deep learning-based techniques. The system is built on ORB-SLAM2, a state-of-the-art SLAM system. The proposed methodology is evaluated using a benchmark dataset, outperforming other Visual SLAM methods in highly dynamic scenarios.

Simultaneous Localization and Mapping (SLAM) is one of the fundamental functionalities for intelligent mobile robots. Over the last few decades, numerous impressive SLAM systems have been developed, demonstrating commendable performance in specific scenarios. However, some challenges still remain unsolved, such as how to handle moving objects in complex environments and how to enable robots to gain a true understanding of their surroundings and perform advanced tasks. This paper proposes a visual SLAM system, YOLOv7-SLAM, designed for complex environments with strong robustness. YOLOv7-SLAM employs a multi-threaded approach with five parallel threads: tracking, semantic segmentation, local mapping, loop closure, and dense semantic mapping creation. YOLOv7-SLAM employs the YOLO object detection method to remove obstacles in complex scenes, reducing the impact of obstacles in the environment and significantly enhancing localization accuracy in complex environments. We conducted experiments using the TUM RGB-D dataset. The results show that YOLOv7-SLAM achieves an order of magnitude improvement in absolute trajectory accuracy compared to ORB-SLAM2, making it one of the most advanced SLAM systems for complex environments. Our experiments were validated using the TUM RGB-D dataset. The results showcase a notable enhancement in the absolute trajectory accuracy of YOLOv7-SLAM in comparison to ORB-SLAM2 [1]. It performs well in complex obstacle-rich environments.

Most existing Simultaneous Localization and Mapping (SLAM) systems rely on the assumption of static environments to achieve reliable and efficient mapping. However, such methods often suffer from degraded localization accuracy and mapping consistency in dynamic settings, as they lack explicit mechanisms to distinguish between static and dynamic elements. To overcome this limitation, we present BMP-SLAM, a vision-based SLAM approach that integrates semantic segmentation and Bayesian motion estimation to robustly handle dynamic indoor scenes. To enable real-time dynamic object detection, we integrate YOLOv5, a semantic segmentation network that identifies and localizes dynamic regions within the environment, into a dedicated dynamic target detection thread. Simultaneously, the data association Bayesian mobile probability proposed in this paper effectively eliminates dynamic feature points and successfully reduces the impact of dynamic targets in the environment on the SLAM system. To enhance complex indoor robotic navigation, the proposed system integrates semantic keyframe information with dynamic object detection outputs to reconstruct high-fidelity 3D point cloud maps of indoor environments. The evaluation conducted on the TUM RGB-D dataset indicates that the performance of BMP-SLAM is superior to that of ORB-SLAM3, with the trajectory tracking accuracy improved by 96.35%. Comparative evaluations demonstrate that the proposed system achieves superior performance in dynamic environments, exhibiting both lower trajectory drift and enhanced positioning precision relative to state-of-the-art dynamic SLAM methods.