A Complex Encryption System Design Implemented by AES

This study discusses the effectiveness of using AES (Advanced Encryption Standard) and RC4 (Rivest Chipper 4) as digital data security algorithms to prevent and protect transaction data from irresponsible parties. This needs to be done because the development of sales transactions or other services has used digital technology a lot. This situation causes the need to secure digital data from existing transactions, so that transaction data can be stored safely. Transaction data security is carried out by changing data into ciphers or codes that are difficult to read using the AES (Advanced Encryption Standard) and RC4 (Rivest Cipher 4) algorithms. This research begins by collecting existing transaction data and then transforming it into ASCII code. The results of the transformation will be used to perform calculations using the AES algorithm. After completing the calculation process using the AES algorithm, then do the calculations using RC4. These results will be stored in the database so that the transaction data that has turned into these codes cannot be known by other parties. The combination of the AES and RC4 algorithms is carried out to strengthen data encryption because there are more and more rotation systems and double security is carried out so that digital data is not easily read and misused. With the presence of this research, it can be shown that the AES and RC4 algorithms are capable of encrypting existing transaction data with multiple levels of security.

The Consultative Committee for Space Data Systems (CCSDS) recommends AES algorithm as a cryptographic algorithm to maintain confidentiality and data security between spacecraft and ground systems. In implementation, there are several AES algorithm operating modes including Cipher-Block Chaining (CBC), Electronic Codebook (EBC), Cipher Feedback (CFB), Output Feedback (OFB), and counter mode (CTR). One of the operating modes of AES algorithm recommended by CCSDS is CTR because it has advantages in terms of efficiency of implementation and offers a high level of data security. LAPAN-A4 as the next generation of LAPAN satellites also uses CCSDS standard in terms of data exchange between satellites and ground stations including telemetry and telecommand (TTC) data and satellite payload data. In order to protect LAPAN-A4 satellite data, especially TTC data, in this paper AES algorithm was implemented in CTR operating mode on the FPGA which will then be implemented on LAPAN-A4 satellite onboard data handling (OBDH) as one of LAPAN-A4 satellite data security systems. To overcome the limited resource of FPGA, optimization is also done using basic iterative AES hardware reused method, which is to reuse hardware that has been designed n times for same operation for AES algorithm. From the results of implementation and optimization, efficiency of logic gates used is increasing almost a quarter less than the previous research.

Mobile ad hoc network (MANET) is a group of mobile nodes that communicates with each other without any supporting infrastructure. These networks have some unique features such as dynamic mobility, open nature, lack of infrastructure, limited physical security and they are vulnerable to several security threats. Malicious node can drop all or partial received packets instead of forwarding them to the next hop through the path. In order to find the malicious nodes, an initial transmission is made between the source and destination nodes. Using fuzzy rules, the trust value of each node is computed and it varies from 0 to 1. A common threshold value is set for each node and by using this threshold value, every node in the network can be identified as either a malicious node or a regular node. After identifying the malicious nodes, these nodes are eliminated by muting the power to off state. As the malicious nodes are eliminated between source and destination nodes, source node can select another trusted path to its destination
 node. For security and authentication of routing information, hybrid cryptography is employed, using advanced encryption standard (AES) and elliptic curve cryptography (ECC) algorithms. AES algorithm is used as symmetric algorithm to encrypt the routing information and ECC algorithm is used as asymmetric algorithm to encrypt the public key. During encryption, the original plain text is converted into cipher text with encrypted public key and similarly during decryption cipher text is converted into original plain text with decrypted private keys. So the proposed method involves both AES and ECC algorithms which provides security mechanism as efficient and sufficient one. The experimental simulations are carried for the proposed model using network simulator 2 (NS-2) for Throughput, Delay, Packet delivery ratio, Packet overhead and Packet drop.

An efficient AES implementation using FPGA with enhanced security features

The meaning of security is to protect something important from not authorized peoples. Cryptography is one of the security systems. Many applications could be used in the security systems like military applications, email, banking, information technology of database. The proposed system uses advanced encryption standard(AES) with secure hash algorithms(SHA-1) to produce a strong ciphertext. Moreover, this paper make the combination of (SHA-1) which is a one way encryption, as a key with (AES) algorithm which is a two way encryption as a ciphering generator to obtain confidentiality and integrity, In this paper presented implementation of Advanced Encryption Standard (AES) and Secure Hash (SHA-1) Algorithm by the use of FPGA Hardware card, However implementation of the AES algorithm and SHA-1 using LABVIEW environment with MATLAB system generator to generate stream data to FPGA hardware target. The output of the hash function is used as an input key for AES in order to improve data security, From the algorithms result of AES and SHA-1 obtained in FPGA, the system obtained how it is simple in modeling hashing and AES algorithms, generating hash codes and plain texts in (small and capital letters), symbols and numbers. The FPGA card used in this system (Spartan 3AN)with frequency (50%), the complete system take (1,147)size from the available space of (11,776) and accuracy (90%),the system work properly.

A new LabVIEW simulation design was applied to provide a comparison study among several types of the most common symmetric and asymmetric encryption algorithms. Also, the comparison with advanced encryption package program was made. The results showed that the new LabVIEW simulation design had advantages in several points, where the evaluated time required for the encryption and decryption processes will be lesser than it values using advanced encryption package program.In this work, the symmetric encryption algorithms were used: AES (Advanced Encryption Standard), DES (Data Encryption Standard), 3DES (Triple Data Encryption Standard) and RC2 (Rivest Cipher) algorithms, while the asymmetric encryption algorithm used was the RSA (Rivest-Shamir-Aldeman) algorithm. The comparison had been achieved using different sizes of text files with different key sizes. The final results proved that the LabVIEW simulation design is better than the Advanced Encryption Package because it increased the algorithm’s performance by 65% in terms of speed and throughput, and for the algorithms’ comparison, the final results showed the effectiveness of AES algorithm over the other algorithms in terms of speed and throughput for the encryption and decryption processes.

The throughput of WPAN (Wireless Personal Area Network) based on Bluetooth was decided by the interference of Bluetooth piconets in the network. The interference was decided by the hamming correlation of Bluetooth FH (Frequency Hopping) selected sequence. In order to improve the WPAN throughput, the WPAN model and data packet collision model were built and the relations about WPAN throughput, the maximum hamming correlation of FH selected sequence, the numbers of Bluetooth piconets and the SNR of channel were analyzed. The functions of WPAN throughput were deduced. After analyzing the performance of Bluetooth FH selected sequence, the original algorithm was replaced by the AES (Advanced Encryption Standard) algorithm. The theoretical analysis proved that the AES FH sequences selected algorithm could improve the WPAN throughput. The simulation results proved the theoretical analysis. The test result with ARM926EJs SoC (System on Chip) + RF (Radio Frequency) chip nRF2401 and CSR's Bluecore4 Bluetooth module got the same conclusion. All of these could prove that the AES algorithm can improve the WPAN throughput efficiently.

Data encryption has become a vital need for protecting the user data in most of communication areas. Advanced Encryption Standard (AES) algorithm has become the optimum choice for various security services in numerous applications due to its reliability and flexibility. The AES algorithm faces two main challenges which included in both encryption/decryption speed, and the consumed implementation area. This paper presents an optimized implementation of the AES algorithm with respect to the consumed implementation area by combining both data and key expansion approaches. The optimized implementation of AES increases its applicability in the small sized devices such as mobile phones and smart cards. The experimental outcomes prove the superiority of the proposed optimization approach compared to the available approaches in the literature with acceptable frequency and throughput for low throughput applications.

The rapid The main problem in the misuse of data used in crime is the result of a lack of file security. This study proposes a data security method to protect document files using the Advanced Encryption Standard (AES) algorithm combined with the Vigenere Cipher. This research carried out 2 processes, namely the encryption process and the decryption process. The encryption process will be carried out by the AES algorithm and then encrypted again with the Vigenere Cipher algorithm. The experiments show that the proposed method can encrypt files properly, where there are changes in the value of the document file and the encrypted file cannot be opened and the description results do not cause changes to the original file. The results of this study are that the system is able to work properly so as to produce file encryption and decryption using the AES method combined with the Vigenere Cipher. In document files, the largest difference in encryption and decryption time is 8 seconds, while in image files the difference in encryption and decryption time is 17 seconds. This longest time difference is generated by large files.

Arithmetic coding technique is very much effective and flexible and it is evident in most of the circumstances while on the other hand AES is advanced encryption standard process which deals with changeover and permutation of data for proper security. The paper presents the security and compression of data by Arithmetic coding with AES (Advanced Encryption Standard) algorithm. Basic research is to arithmetically encode the data first, followed by encryption by using AES algorithm and then transmits the code. At the receiving end the data is decrypted and decoded to produce the user data. The paper has an advantage of encoding/decoding and compression of data both at the same time. The input data size is of 128 bits or 256 bits in AES, so the idea is to compress the data before encryption by digital arithmetic coding. The arithmetic coding and Huffman coding are very much alike in their working as they both achieve the task of compression by plummeting the average number of bits required to represent each and every symbol.

E-commerce becomes an electronic media that uses a login system used by users. User data in the form of usernames and passwords is vulnerable to hacking. One technique to improve user security is the implementation of AES algorithms on login systems in E-Commerce applications. The purpose of this study is to apply the AES algorithm in the login system of e-commerce websites and analyze the improvement of information security for users after the implementation is carried out. The research method used is an experiment with the application of the use of the AES algorithm before and after. Therefore, the application of the AES algorithm on the login system of e-commerce websites can be used as a solution to improve user data security. Testing using Wireshark and Burpsuite tools. The results obtained are that AES successfully secures the username and password on the e-commerce login system .

Human brain known commonly as an individual's computer is one of the complex organs in the body. The brain serves to control and coordinate the mental and physical actions. It has the capacity to store innumerable data. This data includes not only childhood memories but also those related to the present age. Tracking the electrical potentials or impulses, commonly known as brain waves, can be utilized for various purposes ranging from diagnosing diseases to decoding personality traits. This can be done using the technique of Electroencephalography (EEG). The amount of data available is exploding so also the opportunities of data mining thereby mounting privacy risks. The current practice either prevents the reuse of raw EEG signals or disrespects participants' right to privacy by using this data for purposes other than those consented to, by the individual. The aim of this work is to put a stop to such privacy risks by extracting and transferring only those features related to an application. Feature is a specific characteristic measurement of a pattern segment. EEG signal processing pertains mainly to feature extraction. There are different methods for extracting features from EEG signals. In this work, the features related to neurological diseases, namely epilepsy and Alzheimer's disease, are extracted using Discrete Wavelet Transform (DWT) and those related to Schizophrenia are extracted using Autoregressive (AR) method. For securing the raw data, it is doubly encrypted using Advanced Encryption Standard (AES) algorithm and is kept under the control of each user. The proposed system thus ensures the privacy of an individual's EEG signals, and mitigates any risk that may arise if raw data is made available as such to the public.

Advanced Encryption Standard (AES), which is approved and published by Federal Information Processing Standard (FIPS), is a cryptographic algorithm that can be used to protect electronic data. The AES algorithm can be programmed in software or hardware. This paper presents encryption time comparison of the AES algorithm on FPGA and computer. In the study, Verilog HDL and C programming language is used on the FPGA and computer, respectively. The AES algorithm with 128-bit input and key length 128-bit (AES-128) was simulated on Xilinx ISE Design Suite 13.3. It was observed that, the AES algorithm runs on the FPGA faster than on a computer. We measured the time of encryption on FPGA and computer. Encryption time is 390ns of AES on FPGA and 11 μs of AES on a computer.

This paper proposes an image encryption scheme based on a discrete-time alternating quantum walk (AQW) and the advanced encryption standard (AES). We use quantum properties to improve the AES algorithm, which uses a keystream generator related to AQW parameters to generate a probability distribution matrix. Some singular values of the matrix are extracted as the key to the AES algorithm. The Rcon of the AES algorithm is replaced with the elements of the probability distribution matrix. Then, the ascending order of the size of the clone probability distribution matrix scrambles the mapping rules of the S-box and ShiftRow transformations in the AES algorithm. The algorithm uses a probability distribution matrix and plaintext XOR operation to complete the preprocessing and uses the modified AES algorithm to complete the encryption process. The technology is based on simulation verification, including pixel correlation, histograms, differential attacks, noise attacks, information entropy, key sensitivity, and space. The results demonstrate a remarkable encryption effect. Compared with other improved AES algorithms, this algorithm has the advantages of the original AES algorithm and improves the ability to resist correlation attacks.

The National Institute of Standards and Technology (NIST) of US announced Rijndael algorithm as the advanced encryption standard (AES) in October 2000, Despite AES surpassing in security the data encryption standard (DES), it is still rare to be implemented in smart cards, due to the reason of deficient AES coprocessors. Here a chip operation system (COS) called NexCard, which derived from Microsoft's Windows COS, is used as the AES implementation platform. After a suitable COS architecture design for AES and methodology of efficient memory usage, the simulation result shows that direct embedding AES encryption attains 0.56 ms at system clock 15 MHz on the INFINEON SLE66CX322P chip without existence of coprocessor. Corresponding to the development needs in smart card cryptographic algorithm implementations, and different level of the security design specifications, a concept to conjoin numbers of algorithms into single smart card called cipher system on demand (CSOD) method is accomplished in this study concurrently. This is a method utilizing the multiapplication capability of NexCard v2.0 to execute the same AES algorithm as an on-card applet. Although the performance of CSOD is not as good as AES embedded method, CSOD can provide the same result in the situation of adaptability and extendibility.