A fast clock synchronization algorithm for wireless sensor networks

Automatic localization is one of the major issues in Wireless Sensor Networks (WSN). DV-hop algorithm is a well-known localization algorithm in WSN but with limited localization accuracy. In this paper, an improved DV-hop localization algorithm in hybrid optical wireless sensor networks is proposed based on the optimization of the parameters in WSN. Various factors that affect the localization accuracy of the DV-hop algorithm in WSN are investigated, including the communication radius of the node, the number of beacon nodes and the number of the total nodes. As the DV-hop algorithm is applied into hybrid optical sensor and WSNs (O-WSN) with rectangular topology, different parameters have to be optimized accordingly. Simulation results show that the square topology outperforms the rectangle topology more than 45 % under the same network parameters using the improved DV-hop algorithm. Therefore another improved DV-hop called Sub-Square Weighted DV-hop (SSW DV-hop) is proposed for the rectangle topology. Both simulation and experiment results demonstrate that applying the SSW DV-hop algorithmin O-WSNs could significantly improve the localization accuracy.

The wireless sensor networks (WSNs) are usually deployed among widely area for environmental monitoring, data collection and other applications. In order to reduce the energy consumption and extend the lifetime of WSNs, as well as receive the data quickly, a source-based data aggregation algorithm (SBDA) for clustering wireless sensor networks is proposed. The method aggregated the data from sensor nodes and marked different transmission priority for the data. Simulation results show that, compared to existing protocols, the proposed method achieves a longer life time, and a lower packet drop ratio.

In order to improve the location accuracy of unknown nodes in APIT algorithm in mobile wireless sensor networks, an improved APIT algorithm is proposed. A new test method called gravity center combination has been proposed for the InToOut and OutToIn errors in APIT. The algorithm further builds an anchor box by combining one-hop and two-hop information of nodes to limit the range and finally determine the location of unknown nodes to reduce the number of nodes that cannot be located. By improving the coverage and node availability, the positioning accuracy is eventually improved. The complexity is lowered by the lack of requirement of additional hardware, thus the improved algorithm is relatively easy to implement. The simulation results of the verification demonstrate that the updated algorithm improves the coverage ratio and the node usage efficiency compared with the other algorithm, thus makes the mobile node location more accurate.

Wireless sensor networks, by providing an unprecedented way of interacting with the physical environment, have become a hot topic for research over the last few years. As with any new technology, results from real experimentations using these networks are still scarce, as real deployments are either costly, or still unfeasible in the current state of technology. There is therefore an increasing need for simulation tools allowing the testing of different architectures, communication protocols or information processing algorithms in sensor networks. In this paper, we investigate a simulation framework for the testing of data processing in wireless sensor network applications. In a first stage, data is generated using partial differential equations, allowing the modeling of a large panel of physical phenomena. In a second stage, sensing unit operating system and network constraints are simulated using an instance of a versatile simulator to account for the platform characteristics. Insights provided by the proposed simulation frame are illustrated by a set of experiments on a heat source detection task.

Recently, network localization systems that are based on inter-node ranges have received significant attention. Geographic routing has been considered an application which can utilize the location information from these localization systems. In this paper, we firstly recognize that sensor network localization algorithms generate positioning data with different error patterns compared to those networks where node positions are determined directly from GNSS measurements. Secondly, by simulating practical sensor network scenarios using data from our localization algorithm, we observe that existing geographic routing algorithms in wireless sensor networks (WSNs) adopt very simplistic methods in the treatment of position error, without due consideration of error distribution. Additionally, an insight is given into localization algorithms for WSNs with inhomogeneous error environments. Our observations represent an initial step toward a detailed understanding and design of efficient geographic routing algorithms in location aware WSNs.

In wireless sensor networks, the interference around the application environment may cause the actual distance between any pair of nodes to fail to be measured accurately. Enclosure graph (EG) model uses this distance between nodes as its weight to construct the topology, which does not fully consider the interference. Consequently it will lead to a large amount of energy consumption induced by the application environment. Even it shortens the survival time. According to the feature of network energy inequality in a wireless sensor network and the defect of EG, we first introduce the adjustable factor of node degree, establish a model of communication metric and a model for the node actual survival time. Then according to the demand of network energy equalization and maximum network lifetime, we quantitatively analyze the network node degree, and achieve its regular pattern. In accordance with this regular pattern and sufficient conditions of function extremum, the maximum node energy consumption and the maximum node actual survival time are deduced. And the corresponding optimal node degree is achieved. Finally, according to the above model, in this paper we propose an energy balance and robustness adjustable topology control algorithm for wireless sensor networks. Theoretical analyses show that this algorithm can guarantee that the network is connected and the link of the network is bi-directionally connected. Experiments show that the network takes advantage of this optimal node degree to obtain the high robustness, thus guaranteeing that the information can be transferred unfailingly. This algorithm can effectively balance the node energy, improve the node survival time, enhance the network robustness, and prolong the network's lifetime.

In the research on energy-efficient networking methods for precision agriculture, a hot topic is the energy issue of sensing nodes for individual wireless sensor networks. The sensing nodes of the wireless sensor network should be enabled to provide better services with limited energy to support wide-range and multi-scenario acquisition and transmission of three-dimensional crop information. Further, the life cycle of the sensing nodes should be maximized under limited energy. The transmission direction and node power consumption are considered, and the forward and high-energy nodes are selected as the preferred cluster heads or data-forwarding nodes. Taking the cropland cultivation of ginseng as the background, we put forward a particle swarm optimization-based networking algorithm for wireless sensor networks with excellent performance. This algorithm can be used for precision agriculture and achieve optimal equipment configuration in a network under limited energy, while ensuring reliable communication in the network. The node scale is configured as 50 to 300 nodes in the range of 500 × 500 m2, and simulated testing is conducted with the LEACH, BCDCP, and ECHERP routing protocols. Compared with the existing LEACH, BCDCP, and ECHERP routing protocols, the proposed networking method can achieve the network lifetime prolongation and mitigate the decreased degree and decreasing trend of the distance between the sensing nodes and center nodes of the sensor network, which results in a longer network life cycle and stronger environment suitability. It is an effective method that improves the sensing node lifetime for a wireless sensor network applied to cropland cultivation of ginseng.

Popularity of Mobile Wireless Sensor Network (MWSN) has increased tremendously due to the ability to connect the physical world with the virtual world. In MWSN, Sensor nodes move freely in a target area without the need of any special infrastructure. MWSN has attracted many researchers as it has introduced unique challenges in aspects like resource management, coverage, routing protocols, security in many applications such as target tracking in military applications, detection of catastrophic events, environment monitoring, health applications etc. Due to mobility, routing process in MWSN has become more complicated as connections in the network can change dynamically. This paper proposes a Mobility-Aware Multi-Objective Hybrid Routing Algorithm (MMOHRA) for Wireless Sensor Network (WSN). MMOHRA selects the best route and forwards the data packets from source to sink using multiple metrics such as Average Energy consumption, Control Overhead, Reaction Time, LQI, and HOP Count. Performance of MMOHRA is compared with Simple Hybrid Routing Protocol (SHRP) and Dynamic Multi-objective Routing Algorithm (DyMORA) using metrics such as Average Energy Consumption, Packet Delivery Ratio, and Jitter. MMOHRA improves the Average Energy Consumption (AEC) by a factor of 14.1% as compared with SHRP and 8.13 % as compared to DyMORA. MMOHRA outperformed SHRP and DyMORA in terms of packet Delivery Ratio (PDR) by 10.17 % and 9.83 % respectively.

A large number of small sensors in wireless sensor network are battery-powered; one of the most important design criteria for this type of network is energy efficiency. Clustering provides an effective way for extending the lifetime of a sensor network. In this paper, we propose a maximum-votes and load-balance clustering algorithm (VLCA) for wireless sensor network Each sensor collects votes from their neighbors and calculates the total vote received. The more votes a sensor accumulates, the more important it is in the whole network During the clustering phase, sensors compete with each other based on the total votes each has received. The algorithm is completely distributed, locating-unaware and independent of network size and topology. Simulation results show that our VLCA can reduce the number of clusters by 20-50% and prolong the lifetime of a sensor network.

Recent years have witnessed a proliferation of routing algorithms for Wireless Sensor Networks (WSNs), hence complicating the choice of the proper algorithm to be used for a given application. Simulation frameworks represent a viable solution to anticipate crucial choices, however existing solutions do not encompass the impact of changes (e.g., route updates, node crashes) on the nodes behavior and vice-versa. This article proposes a novel adaptive modeling approach to master the complexity of the thorough simulation of routing algorithms for WSN. Experimental results are provided showing the effectiveness of the proposed approach at managing changes, and dealing with detailed aspects, during the simulation and comparison of several routing algorithms.

Wireless sensor networks area collection of a large number of unattended sensor nodes. The sensor nodes are dynamically deployed in the region. In wireless sensor networks, the unlicensed sensor nodes use their temporarily available vacant licensed channels or spectrum band in a telecommunication network. The many open challenges with issues such as adaptive in self-organisation, fault-tolerance and network scalability with cooperative spectrum sensing and sharing are identifying new challenges in wireless sensor networks. In this paper, we proposed the bio-inspired adaptive routing algorithm for cognitive radio wireless sensor networks. The utilisation of the foraging approach of ANTs and BEEs for making the decision of using the available spectrum sensing and sharing of channels over multi-hops communication, provides the method to utilise idle channel and decrease the delay for communication in wireless sensor network. In this paper, we design the algorithm to solve the issue of wireless sensor network and performance of classical routing protocol LEACH and cognitive radio sensor networks (CRSN) evaluates the parameters which proof the self-organisation routing algorithm.

To prolong network lifetime, lifetime maximization routing based on genetic algorithm (GALMR) for wireless sensor networks is proposed. Energy consumption model and node transmission probability are used to calculate the total energy consumption of nodes in a data gathering cycle. Then, lifetime maximization routing is formulated as maximization optimization problem. The select, crosss, and mutation operations in genetic algorithm are used to find the optimal network lifetime and node transmission probability. Simulation results show that GALMR algorithm are convergence and can prolong network lifetime. Under certain conditions, GALMR outperforms PEDAP-PA, LET, Sum-w and Ratio-w algorithms.

Energy balance is an important performance index in the design of routing algorithm for wireless sensor networks. A swarm intelligence optimization based routing algorithm for wireless sensor networks is proposed, whose kernel idea is taking less hop numbers into consideration and choosing the nodes with less pheromone as next hop to avoid some nodespsila prematurely exhausting their energy because of too concentrated routes through the nodes. The experiments show that the algorithm proposed in this paper is better than the directed diffusion routing protocol both in end-to-end delay and global energy balance and can effectively balance the global energy consumption and prolong the network lifetime.

Wireless Sensor Networks (WSNs) are being deployed in a variety of location-dependent applications, where the measurement of data is meaningless without accurate location. Many range-free algorithms were proposed in order to minimize the extra cost that appears in the ranged-based algorithms. Fuzzy logic provides a simple, fast and cost efficient way that can be used in range-free algorithms. In this paper, we propose a fuzzy-based collaborative localization algorithm for wireless sensor networks. Our proposed algorithm implements a Sugeno-type fuzzy system using a collaborative feedback communication scheme. The proposed algorithm provides more accurate localization estimation without any additional hardware implementation. The simulation results demonstrate the effectiveness of the proposed approach.

Localization technology is the basis of practical applications of wireless sensor networks (WSNs). An improved localization algorithm for wireless sensor networks was proposed to reduce hop distance error and solve the premature convergence problem for the hybrid localization algorithm of DV-Hop and Bat (BADV-Hop). Based on the vector routing localization mechanism, an optimization method was designed to enhance the average hop distance accuracy. The linear weight strategy was used to correct searching velocity of bats. In addition, tendentious random disturbance was established to optimize location information. Experimental results showed that the localization accuracy of improved algorithm is 13% greater than that of DV-Hop algorithm and 3% greater than that of BADV-Hop algorithm. Moreover, the improved algorithm effectively reduced the maximum iterations and avoided premature convergence without any additional energy consumption compared to BADV-Hop algorithm.