A medium access control protocol for voice and data integration in receiver-oriented DS-CDMA PCNs

Multiple access interference (MAI) appears in Code Division Multiple Access (CDMA) systems when the communication channel is a multi-path channel and the spreading codes are not orthogonal. Orthogonality between spreading codes cannot be maintained at the CDMA receiver because the codes may be asynchronous due to channel delay and multi-path spread. The receiver cannot perfectly separate the different signals of the multiple access users, and the resultant MAI limits the capacity of CDMA systems. MAI is a function of the cross correlation property between used spreading codes. In this paper we focus on the cross correlation of the spreading codes, we propose a method to find spreading codes with minimum magnitude of cross correlation. Employing these codes will reduce the resultant MAI in the CDMA system; hence it will increase the system capacity. A great enhancement is shown by comparing found minimum cross correlation spreading codes (MCCSC) with Hadamard and Gold codes.

In synchronous code division multiple access (CDMA) systems, both multiple access interference (MAI) and intersymbol interference (ISI) arise. MAI is present due to the CDMA format while ISI is present due to channel multipath. One approach to overcome these problems is to detect the entire package of data for all users at once. This implies working with matrices with dimensions proportional to the product of the data package length and the number of active users. In this paper, we present an alternative approach. This alternative consists of a type of multistage detector that overcomes the MAI and ISI problems; in addition, it has complexity proportional to the number of CDMA users, is computationally efficient, and is suitable for pipeline implementation which allows fast data processing. Simulations are compared to a derived single user bound for the average bit error probability and the results prove the validity of the proposed detection method.

Improvement of the capacity of the CDMA (code division multiple access) system is a major objective. The capacity of the system is mainly limited by the signal to noise ratio, where the noise comes from the channel background and from MAI (multiple access interference). Usually, the way to improve the capacity is to decrease the MAI; this is why orthogonal codes are adopted by the IS-95 standard. One problem is that the number of orthogonal codes is constrained by the dimensionality of the signal space. So in IS-95, there are only 64 orthogonal codes available when the number chips for each sequence is 64. To solve this problem, a non-orthogonal code called WBE (Welch bound equality) sequences (Massey and Mittelholzer 1991) is used in this paper The criterion to construct the code is to minimize the MAI. Two methods are used to construct the WBE sequences: from a linear cyclic code or from a Hadamard matrix. In order to improve the performance of the WBE sequence set, an iteration receiver (Sari et al. 1999) is applied. The conclusion obtained is that when the number of users is slightly greater than the signal space dimensionality, after the first iteration, the performance is only marginally worse than the orthogonal CDMA system.

One of the major advantages of a code division multiple access (CDMA) system is the flexibility in frequency assignment, which allows all the users to share the same frequency band and, possibly, to partially overlay the spectrum allocation of different services. However, before synchronism to the desired sequence is achieved, the presence of multiple access interference (MAI) is a major impairment which determines the performance of the code acquisition sub-system. It has been argued that the acquisition performance in the presence of MAI may pose limits to the capacity of a CDMA system which are more stringent than those coming from bit error probability specifications. We introduce a general definition for acquisition-based capacity of a CDMA system. This quantity is evaluated for an acquisition sub-system with non-coherent correlator/detector and straight serial search in the time uncertainty region. The effect of imperfect power control is also analysed, showing that the capacity may be substantially decreased when the residual standard deviation of the received power level is above 1 dB. >

Channel estimation techniques for code-division multiple access (CDMA) systems need to combat multiple access interference (MAI) effectively. Most existing estimation techniques are designed for CDMA systems with short repetitive spreading codes. However, current and next generation wireless systems use long spreading codes whose period is much larger than the symbol duration. In this paper, we derive the maximum likelihood channel estimate for long code CDMA systems over multipath channels using training sequences and approximate it using an iterative algorithm to reduce the computational complexity in each processing window. The asymptotic convergence of the mean of the iterative estimate to the actual channel is also shown. The effectiveness of the iterative channel estimator is demonstrated in terms of squared error in estimation as well as the bit error rate performance of a multistage detector based on the channel estimates. Finally, the proposed iterative channel estimation technique is extended to track slowly varying multipath fading channels using decision feedback. Thus, an MAI resistant multiuser channel estimate with reasonable computational complexity is derived for long code CDMA systems over multipath fading channels.

The quality of wireless communication links that employ code-division multiple access (CDMA) mainly suffers from user capacity limit caused by multiple access interference (MAI). To reduce the MAI, we propose parallel interference cancellation assisted channel estimation (PICACE) especially for the indoor reverse link and present theoretical results. We use the signal processing worksystem (SPW) simulator for evaluating 2-D linear 1st order Gaussian interpolation. Because each user's signal on the reverse link may experience different channel fading, we propose reference aided data structure to distinguish each user's own signal. The theoretical results illustrate that PICACE can extend the user capacity of CDMA.

This paper carries comprehensive comparison of Interleave Division Multiple Access (IDMA) and Code Division Multiple Access (CDMA) systems in terms of performance (BER) and behavior to different number of users. Performance analysis of two systems whose transmitter and receiver structures are almost same are studied under Additive White Gaussian Noise (AWGN) and performance differences are illustrated by simulation results. Although Multiple Access Interference (MAI) and Intersymbol Interference (ISI) can affect the performance of the CDMA system, simulation results illustrates that IDMA system model achieves this type of problem using their interleavers. Results also show that large number of users can easily be adapted by the IDMA scheme much easier than CDMA scheme.

An implementation technique for a code division multiple access (CDMA) multirate radio interface is presented. It is based on low rate orthogonal convolutional (LOROC) coding. A connection between LOROC encoding and the multiuser equalization structures of B.R. Petersen (1992) is established, and it is shown that the combined scheme is a strong candidate for implementing third-generation digital cellular systems capable of supporting multimedia services. The LOROC encoding scheme is reviewed with emphasis on the multiple access interference (MAI) characterization of LOROC encoded multirate spread spectrum signals. The effect of interleaving is also addressed. A multiuser equalizer particularly suitable for a MAI rejecting mobile hand-portable has been put together with a LOROC decoder. The implementation aspects and advantages of this combination are addressed. >

In recent years, more and more wireless communications systems are required to provide also a positioning measurement. In code division multiple access (CDMA) communication systems, the positioning accuracy is significantly degraded by the multiple access interference (MAI) caused by other users in the system. This MAI is commonly managed by a power control mechanism, and yet, MAI has a major effect on positioning accuracy. Probability control is a recently introduced interference management mechanism. In this mechanism, a user with excess power chooses not to transmit some of its symbols. The information in the nontransmitted symbols is recovered by an error-correcting code (ECC), while all other users receive a more reliable data during these quiet periods. Previous research had shown that the implementation of a probability control mechanism can significantly reduce the MAI. In this paper, we show that probability control also improves the positioning accuracy. We focus on time-of-arrival (TOA) based positioning systems. We analyze the TOA estimation performance in a generalized CDMA system, in which the probability control mechanism is employed, where the transmitted signal is noncontinuous with a symbol transmission probability smaller than 1. The accuracy of the TOA estimation is determined using appropriate modifications of the Cramer-Rao bound on the delay estimation. Keeping the average transmission power constant, we show that the TOA accuracy of each user does not depend on its transmission probability, while being a nondecreasing function of the transmission probability of any other user. Therefore, a generalized, noncontinuous CDMA system with a probability control mechanism can always achieve better positioning performance, for all users in the network, than a conventional, continuous, CDMA system.

The channel characteristics of practical code division multiple access (CDMA) systems are usually unknown and difficult to model accurately. Type-based receivers, without assuming any a priori model, extract signals successfully from background noise. In this paper, we develop type-based receivers that address two major issues in CDMA signal reception: multiple access interference and multipath fading. We first present the type-based receiver with interference suppression capability, assuming the knowledge of the code and timing of the intended user only. We then show that equal-gain combining (EGC) of type-based statistics is the asymptotically optimal technique for diversity empirical detection. Compared with maximal ratio combining of matched filter outputs, the diversity receiver with EGC of type-based statistics assumes less channel knowledge and yields competitive detection performance in Gaussian noise and better performance in Laplacian noise.

We propose a time division multiple access (TDMA) scheme for the BPSK modulated single carrier block transmission with frequency domain equalization (SC-FDE) over ultra-wideband (UWB) communications. The transmitter and receiver matrices for the proposed TDMA SC-FDE system are derived to achieve the multiple access interference (MAI) free and interblock-interference (IBI) free transmission without the insertion of cyclic prefix (CP) between blocks, circumventing the need for long CP and large FFT size in high speed UWB communications. The performance of the proposed TDMA SC-FDE system over UWB channels is investigated and compared with that of the block spread code division multiple access (CDMA) scheme. The effects of oversampling diversity and imperfect channel estimation are also investigated. Results show that the proposed TDMA scheme can effectively eliminate the error floor in CDMA due to insufficient CP, and it is more efficient to accommodate larger number of users than CDMA in high data rate transmission

In code division multiple access (CDMA) systems transmitting over time-varying multipath channels, both intersymbol interference (ISI) and multiple access interference (MAI) arise. The conventional suboptimum receiver consisting of a bank of matched filters is often inefficient because interference is treated as noise. The optimum multi-user detector is too complex to be implemented at present. Four suboptimum detection techniques based on zero forcing (ZF) and minimum mean square error (MMSE) equalization with and without decision feedback (DF) are presented and compared. They combat both ISI and MAI. The computational complexity of all four equalizers is essentially the same and they are independent of the size of the data symbol alphabet. It is shown that all four equalizers considerably outperform the conventional receiver. The MMSE equalizers are superior to the corresponding ZF equalizers. Furthermore, the equalizers with DF perform better than the corresponding equalizers without DF. An algorithm termed channel sorting is introduced to reduce the impairing effect of error propagation on the equalizers with DF. >

In this contribution, we investigate the performance of dual-polarized multi input multi output (MIMO) multi-carrier interleave division multiple access system (MC-IDMA) over correlated frequency selective channels in the presence of channel state estimation error. In the code division multiple access (CDMA), orthogonal spreading sequence is used as user specific where as in IDMA, user specific interleaving pattern is used. In our considered work, Multi-carrier (MC) is realized by orthogonal frequency division multiplexing (OFDM). The channel is estimated at the mobile stations (MSs) by pilot assisted channel estimation (PACE) technique using minimum mean square error (MMSE) algorithm. Further, the dual-polarized MIMO system considered in our work which is realized with the aid of orthogonal polarizations, replaces two spatially separated uni-polarized antennas, thus resulting in polarization multiplexing. In particular, we evaluate the effects of three types of delay spread on MIMO MC-IDMA system in the context of downlink (DL) communications pertaining to the Standard University Interim (SUI) channel model. In a multi-user environment, users experience multi stream interference (MSI) in addition to the multiple access interference (MAI) and these interferences can degrade the system performance. Furthermore, we consider turbo code as channel encoder for MIMO MC-IDMA system to mitigate the effects of MAI and MSI. It is discerned from the simulation results that dual-polarized MIMO MC-IDMA system is capable of supporting many users and performs better in terms of achievable bit error rate (BER) in the context of DL communications with reduced number of antennas.

This paper addresses the problem of real-time multimedia transmission in fiber-optic networks using code division multiple access (CDMA). We present a multirate optical fast frequency hopping CDMA (OFFH-CDMA) system architecture using fiber Bragg gratings (FBGs). In addition, we argue that, in multimedia applications, different services have different quality of service (QoS) requirements; hence, the user only needs to use the minimum required power to transmit the signal, such that the required signal-to-interference ratio (SIR) is met. We show that a variable bit rate optical communication system with variable QoS can be implemented by way of power control with great efficiency. Present-day multirate optical CDMA systems concentrate on finding the code structure that supports a variable rate system, neglecting the importance of the transmission power of active users on the multiple access interference (MAI) and, therefore, on the system capacity. We assign different power levels to each rate through a power control algorithm using variable optical attenuators, which minimizes the interference and, at the same time, provides variable QoS constraints for different traffic types. Although we are using a code family that preserves good correlation properties between codes of different lengths, simulations show a great improvement in the system capacity when power control is used.

Code Division Multiple Access (CDMA) and multiple input multiple output- (MIMO-) CDMA systems suffer from multiple access interference (MAI) which limits the spectral efficiency of these systems. By making these systems more power efficient, we can increase the overall spectral efficiency. This can be achieved through the use of improved modulation and coding techniques. Conventional MIMO-CDMA systems use fixed spreading code assignments. By strategically selecting the spreading codes as a function of the data to be transmitted, we can achieve coding gain and introduce additional degrees of freedom in the decision variables at the output of the matched filters. In this paper, we examine the bit error rate performance of parity bit-selected spreading and permutation spreading under different wireless channel conditions. A suboptimal detection technique based on maximum likelihood detection is proposed for these systems operating in frequency selective channels. Simulation results demonstrate that these code assignment techniques provide an improvement in performance in terms of bit error rate (BER) while providing increased spectral efficiency compared to the conventional system. Moreover, the proposed strategies are more robust to channel estimation errors as well as spatial correlation.