A method of weak target detection based on the sea clutter

Parameters of support vector machines (SVM) which is optimized by standard genetic algorithm is easy to trap into the local minimum, in order to get the optimal parameters of support vector machine, this paper proposed a parameters optimization method for support vector machines based on improved genetic algorithm, the simulation experiment is carried out on 5 benchmark datasets. The simulation show that the proposed method not only can assure the classification precision, but also can reduce training time markedly compared with standard genetic algorithm. DOI : http://dx.doi.org/10.11591/telkomnika.v12i1.3182

Automatic recognition of skin symptom plays an importance role in the skin diagnosis and treatment. Feature selection is to increase the classification performance of skin symptom. In this paper, the effects of feature selection on the classification of 4-class skin symptoms (chloasma, blackhead, freckled and comedone) are analyzed. Support vector machine (SVM) is employed to construct classifier, the parameters setting is very crucial to the learning results and generalization ability of SVM, and many irrelevant and redundant features degrade the performance of classification, furthermore, the choice of SVM parameters is influenced by the feature subset taken into account and vice versa. So a joint optimization method for selecting features and SVM parameters is proposed. Genetic algorithms, which have a lot of improvements about fitness, crossover and mutation in comparison with simple genetic algorithms, is to achieve a balance between the classification accuracy and the size of the feature subsets selected and have a fast convergence rate. Furthermore, ‘one-against-one’ approach is used to solve multi-class classification problems and a comparison of the model performances is made among the results of the joint optimization and the single optimization of features or SVM parameters in the experiments. The simulation result shows that our approach can find subsets of features for 4-class skin symptoms classification with higher average cross validation accuracy and a higher rate of convergence compared with single optimization of features or SVM parameters.

Flood susceptibility mapping using a novel ensemble weights-of-evidence and support vector machine models in GIS

Since load forecasting plays an important role in the planning and operation of power industry, substantial efforts are made in improving the accuracy and reliability of load forecasting.In this paper, we develop a novel hybrid approach based on phase space reconstruction and least square support vector for the short-term load forecasting.However, the proper parameters in phase space reconstruction and least square vector machine have a significant effect on the forecasting performance, and there is no standard solution for the parameter estimation problem.Therefore, in this paper, the genetic algorithm (GA) approach is employed to optimize the parameters of both phase space reconstruction and least square support vector machine together.The experimental results suggest that the joint optimization parameter is superior to the separate optimization solutions.

Accurate estimation of river flow can have a significant importance in water resources management. In this study, Genetic programming (GP) and Support Vector Machine (SVM) methods were used to forecast daily discharge of Barandoozchay River. The daily discharge data of Barandoozchay River measured at the Dizaj hydrometric station during 2007 to 2011 was used for modeling, which 80% of the data used for training and remaining 20% used for testing of models. The results showed that in the both of considered methods, the models including discharges of one, two and three days ago had higher accuracy in verification step and the accuracy of models decreased with increasing discharge values. Comparing the performance of GP and SVM methods indicated that, however the accuracy of the GP method with the R=0.978 and RMSE=1.66 (m3/s) was slightly more than SVM method with R=0.976 and RMSE=1.80 (m3/s), but the SVM is easier than GP method. Thus, the SVM method can be used as an alternative method in forecasting daily river discharge.

Abstract. The Support Vector Machine (SVM) is a theoretically superior machine learning methodology with great results in classification of remotely sensed datasets. Determination of optimal parameters applied in SVM is still vague to some scientists. In this research, it is suggested to use the Taguchi method to optimize these parameters. The objective of this study was to detect tree crowns on very high resolution (VHR) aerial imagery in Zagros woodlands by SVM optimized by Taguchi method. A 30 ha plot of Persian oak (Quercus persica) coppice trees was selected in Zagros woodlands, Iran. The VHR aerial imagery of the plot with 0.06 m spatial resolution was obtained from National Geographic Organization (NGO), Iran, to extract the crowns of Persian oak trees in this study. The SVM parameters were optimized by Taguchi method and thereafter, the imagery was classified by the SVM with optimal parameters. The results showed that the Taguchi method is a very useful approach to optimize the combination of parameters of SVM. It was also concluded that the SVM method could detect the tree crowns with a KHAT coefficient of 0.961 which showed a great agreement with the observed samples and overall accuracy of 97.7% that showed the accuracy of the final map. Finally, the authors suggest applying this method to optimize the parameters of classification techniques like SVM.

Accuracy of data and information on various types of land use and land cover (LULC) is crucial in watershed management planning. The development of remote sensing technology in predicting LULC has been widely used, such as the Support Vector Machine (SVM) and Random Trees (RT) methods. Both methods are part of the model of machine learning and belong to the category of supervised learning. This method can predict, study, and recognize data patterns from the results of training data. The aim of this research is the use of SVM and RT methods for the identification of LULC. Based on the SVM method analysis results, the forest area is 211.61 km2, coffee plantations are 32.92 km2, shrubs are 16.85 km2, built-up/bare land is 3.40 km2, the water body is 3.17 km2, and cloud/shadow is 6.79 km2. While the RT method obtained a forest area of 215.51 km2, coffee plantations covering an area of 29.32 km2, shrubs are covering an area of 16.32 km2, built-up/bare land surrounding an area of 7.22 km2, water body covering an area of 2.62 km2, and cloud/shadow covering an area of 3.75 km2. Overall, the percentage accuracy of the SVM method of 87%, and the RT of 86%. The success rate of modeling SVM (AUC = 0.73) and RT (AUC = 0.75) based on the results of data validation using the area under the receiver operating characteristic curve (AUC) was considered fair good.

The specifications of the forests in Kalimantan are part of the vegetation type which is characteristic of dry lowland forests that are rich in biodiversity. The Kalimantan forest area is known as an area that has the highest vascular biodiversity in the world. Until 2014, the rate of forest loss as a source of biodiversity was always high every year. The National Polar-Orbiting Suomi Partnership (Suomi NPP) is a new generation of weather satellite imagery from NASA which currently continues to develop application algorithms for environmental monitoring. The support vector machine (SVM) method is a one-class learning machine method with artificial neural network methods that can recognize patterns from input or examples given and also include supervised learning. This study aims to analyze the effect of each parameter on the SVM method and the combination that can produce the highest accuracy, and analyze the ability of the SVM method for making hotspot maps based on the number of forest fire areas in East Kalimantan. The results of the study showed that the Support Vector Machine (SVM) method on the spectral data produced a total of 85%.

In the brain Magnetic Resonance (MR) images, the boundary of each encephalic tissue is highly irregular. It is difficult to accurately detect the encephalic tissues. Owing to its powerful capacity in solving non-linearity problems, Support Vector Machine (SVM) has been widely used in object detection. The conventional SVMs, however, assume that each feature of a sample has the same importance degree for the detection result, which is not a true representation of real applications. In addition, the parameters of the SVM and its kernel function also affect detection result. In this study, Immune Algorithm (IA) was introduced in searching for the optimal feature weights and the parameters simultaneously. An Immune Feature Weighted SVM (IFWSVM) method was used to detect encephalic tissues in MR images. Theoretical analysis and experimental results showed that the IFWSVM has better performance than the conventional methods.

Hyperspectral remote sensing imagery, due to its rich source of spectral information, provides an efficient tool for land cover classifications in complex geographical areas. However, the high-dimensional space of this imagery poses two important challenges in the classification process: the Hughes phenomena and the existence of relevant and redundant features. The robustness of Support Vector Machines (SVM) in high-dimensional space makes them an efficient tool for classifying hyperspectral imagery. However, optimum SVM parameter determination and optimum feature selection are the two optimization issues that strongly effect SVM performance. Traditional optimization algorithms can discover optimum solutions in a limited search space with one local optimum. Nevertheless, in high-dimensional space traditional optimization algorithms usually get trapped in a local optimum, therefore it is necessary to apply meta-heuristic optimization algorithms to obtain near-global optimum solutions. This study evaluates the potential of Ant Colony Optimization (ACO) for determining SVM parameters and selecting features. Results obtained from AVIRIS and ROSIS hyperspectral datasets demonstrate the superior performance of SVM, achieved by simultaneously optimizing SVM parameters and subsets of the input feature. For comparison, the evaluation is also performed by applying it to other meta-heuristic optimization algorithms such as simulated annealing, tabu search, and genetic algorithm. The results demonstrate a better performance of the ACO-based algorithm in regards to improving the classification accuracy and decreasing the size of selected feature subsets.

Sirekap is a mobile application that was built to help the public monitor and oversee the development of the 2024 elections held in Indonesia. The research aims to apply the Support Vector Machine algorithm in analyzing sentiment about the use of the Sirekap application in 2024. The Support Vector Machine method is used to classify user sentiment into classes, namely positive, negative, and very negative. The amount of data used is 15,000 data sourced from Sirekap application reviews on Google PlayStore, with more detailed research stages including data collection, data preprocessing, data labeling, visualization, word weighting, and testing and analysis. The results show that the Support Vector Machine algorithm provides an accuracy of 88% for the Sirekap 2024 application. These results are expected to help developers to develop further the Sirekap 2024 application in improving the quality of the application and providing better user comfort Based on the results of the sentiment analysis of Sirekap 2024 application users on the Google Play store using the Support Vector Machine (SVM) method, an accuracy rate of 88% was obtained in classifying the sentiment of reviews into positive, negative, and very negative. This shows that the Support Vector Machine method is quite accurate for sentiment analysis of Indonesian text data. Overall, most reviews are very negative with a percentage reaching 76.9%, followed by negative reviews at 12.6%, and the least are positive reviews at 11%.

In this paper, we develop a low-cost portable spectrometer based on Support Vector Machines (SVM) method. The purpose of the spectrometer development is for halal food research project. The portable spectrometer uses various light-emitting diodes (LEDs), light sensor and Arduino microcontroller. The initial research of the spectrometer is testing various oil, such as palm oil, olive oil, sesame oil, soybean oil, and lard. The waveform analysis of each oil can be distinguished by spectroscopy method. But, by using Support Vector Machines (SVM) method the various oil can be distinguished and classified better. The data measurement, classification, and graphical interface result show on the interface of Raspberry Pi based on Python 2.7. Thus, the spectrometer can be used for lard detection.

With regard to the lack of the sample of faults in the test of autopilot, a model of fault diagnosis based on support vector machine (SVM) optimized by multi-verse optimizer (MVO) is put forward. SVM does well in solving the few samples and nonlinear problem, which is suitable for the fault diagnosis of autopilot. To solve the overfitting and underfitting resulted from the improper parameters of SVM, multi-verse optimizer was applied to optimizing the parameters of SVM. By this way, a model of fault diagnosis with better performance was built. The simulation experiment results show that the accuracy of SVM based on MVO can achieve 98.3673% using 50 training samples. However, the accuracy of genetic algorithm (GA)-SVM achieves 91.0204% and the accuracy of SVM based on gravitational search algorithm (GSA) achieves 91.6327%. The simulation experiment results shows that SVM based on MVO has much better performance than others.

In view of the shortcomings of traditional dissolved gas analysis technology low diagnostic veracity and low intelligence, this paper proposes to use QPSO to optimize the nuclear argument in the support vector machine (SVM), and on this basis, dissolved gas analysis (DGA) technology is used to diagnosis transformer faults. Firstly, the transformer data is preprocessed by DGA technology, and the processed data is used as the input amount of fault characteristics. Secondly, for the optimization of core parameters in SVM, the QPSO algorithm is combined with fault data for training and acquisition. Finally, five kinds of feature inputs are added to the model for training, and the trained multi-classification correlation vector machine is used to diagnose the test data. After case studies and comparative experimental analysis, the diagnostic accuracy of this method is as high as 94.74%, and relatively with SVM, PSO-SVM, and RVM methods, the accuracy is increased by 5.11%, 2.12%, and 2.12%, respectively.

Transverse mixing coefficient (TMC) is known as one of the most effective parameters in the two-dimensional simulation of water pollution, and increasing the accuracy of estimating this coefficient will improve the modeling process. In the present study, genetic algorithm (GA)-based support vector machine (SVM) was used to estimate TMC in streams. There are three principal parameters in SVM which need to be adjusted during the estimating procedure. GA helps SVM and optimizes these three parameters automatically in the best way. The accuracy of the SVM and GA-SVM algorithms along with previous models were discussed in TMC estimation by using a wide range of hydraulic and geometrical data from field and laboratory experiments. According to statistical analysis, the performance of the mentioned models in both straight and meandering streams was more accurate than the regression-based models. Sensitivity analysis showed that the accuracy of the GA-SVM algorithm in TMC estimation significantly correlated with the number of input parameters. Eliminating the uncorrelated parameters and reducing the number of input parameters will reduce the complexity of the problem and improve the TMC estimation by GA-SVM.