A multi-missile cooperative coverage guidance strategy based on the ISO algorithm

Arctic puffin optimization: A bio-inspired metaheuristic algorithm for solving engineering design optimization

ABSTRACTThree‐dimensional path planning for UAV in complex terrains and obstacle‐limited areas is one of the major challenges faced during mission execution, requiring a simple yet effective algorithm. To solve such problems, an improved Sand Cat Swarm Optimization (SCSO) is proposed, addressing the issue where traditional SCSO is prone to getting stuck in local optima. In this improved approach, a nonlinear adjustment mechanism based on a dynamic factor k is introduced to better balance the exploration and exploitation phases. Additionally, the predatory attack strategy of Harris's Hawks was introduced to improve the position update formula during the exploration phase of the SCSO, thus enhancing the algorithm's convergence speed. A new variant of the SCSO, named HKSCSO, is proposed and applied to UAV path planning. Cost functions are introduced to evaluate path length, flight altitude, and angle comprehensively. HKSCSO's performance was tested in three 3D urban environments, showing faster convergence and safer paths compared to SCSO, Harris's Hawks Optimization (HHO), Particle Swarm Optimization (PSO), Seagull Optimization Algorithm (SOA), Whale Optimization Algorithm (WOA), Parrot Optimizer (PO), and Mantis Search Algorithm (MSA). These results indicate HKSCSO's potential as an effective solution for UAV three‐dimensional path planning.

This paper presents a powerful swarm intelligence meta-heuristic optimization algorithm called Dynamic Cat Swarm Optimization. The formulation is through modifying the existing Cat Swarm Optimization. The original Cat Swarm Optimization suffers from the shortcoming of 'premature convergence', which is the possibility of entrapment in local optima which usually happens due to the off-balance between exploration and exploitation phases. Therefore, the proposed algorithm suggests a new method to provide a proper balance between these phases by modifying the selection scheme and the seeking mode of the algorithm. To evaluate the performance of the proposed algorithm, 23 classical test functions, 10 modern test functions (CEC 2019) and a real world scenario are used. In addition, the Dimension-wise diversity metric is used to measure the percentage of the exploration and exploitation phases. The optimization results show the effectiveness of the proposed algorithm, which ranks first compared to several well-known algorithms available in the literature. Furthermore, statistical methods and graphs are also used to further confirm the outperformance of the algorithm. Finally, the conclusion as well as future directions to further improve the algorithm are discussed.

Cooperative interception with fast multiple model adaptive estimation

PurposeSea Lion Optimization (SLnO) algorithm involves the ability of exploration and exploitation phases, and it is able to solve combinatorial optimization problems. For these reasons, it is considered a global optimizer. The scheduling operation is completed by imitating the hunting behavior of sea lions.Design/methodology/approachCloud computing (CC) is a type of distributed computing, contributory in a massive number of available resources and demands, and its goal is sharing the resources as services over the internet. Because of the optimal using of these services is everlasting challenge, the issue of task scheduling in CC is significant. In this paper, a task scheduling technique for CC based on SLnO and multiple-objective model are proposed. It enables decreasing in overall completion time, cost and power consumption; and maximizes the resources utilization. The simulation results on the tested data illustrated that the SLnO scheduler performed better performance than other state-of-the-art schedulers in terms of makespan, cost, energy consumption, resources utilization and degree of imbalance.FindingsThe performance of the SLnO, Vocalization of Whale Optimization Algorithm (VWOA), Whale Optimization Algorithm (WOA), Grey Wolf Optimization (GWO) and Round Robin (RR) algorithms for 100, 200, 300, 400 and 500 independent cloud tasks on 8, 16 and 32 VMs was evaluated. The results show that SLnO algorithm has better performance than VWOA, WOA, GWO and RR in terms of makespan and imbalance degree. In addition, SLnO exhausts less power than VWOA, WOA, GWO and RR. More precisely, SLnO conserves 5.6, 21.96, 22.7 and 73.98% energy compared to VWOA, WOA, GWO and RR mechanisms, respectively. On the other hand, SLnO algorithm shows better performance than the VWOA and other algorithms. The SLnO algorithm's overall execution cost of scheduling the cloud tasks is minimized by 20.62, 39.9, 42.44 and 46.9% compared with VWOA, WOA, GWO and RR algorithms, respectively. Finally, the SLnO algorithm's average resource utilization is increased by 6, 10, 11.8 and 31.8% compared with those of VWOA, WOA, GWO and RR mechanisms, respectively.Originality/valueTo the best of the authors’ knowledge, this work is original and has not been published elsewhere, nor is it currently under consideration for publication elsewhere.

Bayesian Optimization (BO) is a widely-used method for optimizing expensive-to-evaluate black-box functions. Traditional BO assumes that the learner has full control over all query variables without additional constraints. However, in many real-world scenarios, controlling certain query variables may incur costs. Therefore, the learner needs to balance the selection of informative subsets for targeted learning against leaving some variables to be randomly sampled to minimize costs. This problem is known as Bayesian Optimization with cost-varying variable subsets (BOCVS). While the goal of BOCVS is to identify the optimal solution with minimal cost, previous works have only guaranteed finding the optimal solution without considering the total costs incurred. Moreover, these works assume precise knowledge of the cost for each subset, which is often unrealistic. In this paper, we propose a novel algorithm for the extension of the BOCVS problem with random and unknown costs that separates the process into exploration and exploitation phases. The exploration phase will filter out low-quality variable subsets, while the exploitation phase will leverage high-quality ones. Furthermore, we theoretically demonstrate that our algorithm achieves a sub-linear rate in both quality regret and cost regret, addressing the objective of the BOCVS problem more effectively than previous analyses. Finally, we show that our proposed algorithm outperforms comparable baselines across a wide range of benchmarks.

An innovative method for the automatic design of optical systems is presented and verified. The proposed method is based on a multi-objective evolutionary memetic optimization algorithm. The multi-objective approach simultaneously, but separately, addresses the image quality, tolerance, and complexity of the system. The memetic technique breaks down the search for optical designs in to three different parts or phases: optical glass selection, exploration, and exploitation. The optical glass selection phase defines the most appropriate set of glasses for the system under design. The glass selection phase limits the available glasses from hundreds to just a few, drastically reducing the design space and significantly increasing the efficiency of the automatic design method. The exploration phase is based on an evolutionary algorithm (EA), more specifically, on a problem-tailored generalized extremal optimization (GEO) algorithm, named Optical GEO (O-GEO). The new EA incorporates many features customized for lens design, such as optical system codification and diversity operators. The trade-off systems found in the exploration phase are refined by a local search, based on the damped least square method in the exploitation phase. As a result, the method returns a set of trade-off solutions, generating a Pareto front. Our method delivers alternative and useful insights for the compromise solutions in a lens design problem. The efficiency of the proposed method is verified through real-world examples, showing excellent results for the tested problems.

The location planning of relief distribution centres (DCs) is crucial in humanitarian logistics as it directly influences the disaster response and service to the affected victims. In light of the critical role of facility location in humanitarian logistics planning, the study proposes a two-stage relief distribution location problem. The first stage of the model determines the minimum number of relief DCs, and the second stage find the optimal location of these DCs to minimize the total cost. To address a more realistic situation, restrictions are imposed on the coverage area and capacity of each DCs. In addition, for optimally solving this complex NP-hard problem, a novel two-phase algorithm with exploration and exploitation phase is developed in the paper. The first phase of the algorithm i.e., exploration phase identifies a near-optimal solution while the second phase i.e. exploitation phase enhances the solution quality through a close circular proximity investigation. Furthermore, the comparative analysis of the proposed algorithm with other well-known algorithms such as genetic algorithm, pattern search, fmincon, multistart and hybrid heuristics is also reported and computationally tested from small to large data sets. The results reveal that the proposed two-phase algorithm is more efficient and effective when compared to the conventional metaheuristic methods.

The dwarf mongoose optimization (DMO) algorithm developed in 2022 was applied to solve continuous mechanical engineering design problems with a considerable balance of the exploration and exploitation phases as a metaheuristic approach. Still, the DMO is restricted in its exploitation phase, somewhat hindering the algorithm's optimal performance. In this paper, we proposed a new hybrid method called the BDMSAO, which combines the binary variants of the DMO (or BDMO) and simulated annealing (SA) algorithm. In the modelling and implementation of the hybrid BDMSAO algorithm, the BDMO is employed and used as the global search method and the simulated annealing (SA) as the local search component to enhance the limited exploitative mechanism of the BDMO. The new hybrid algorithm was evaluated using eighteen (18) UCI machine learning datasets of low and medium dimensions. The BDMSAO was also tested using three high-dimensional medical datasets to assess its robustness. The results showed the efficacy of the BDMSAO in solving challenging feature selection problems on varying datasets dimensions and its outperformance over ten other methods in the study. Specifically, the BDMSAO achieved an overall result of 61.11% in producing the highest classification accuracy possible and getting 100% accuracy on 9 of 18 datasets. It also yielded the maximum accuracy obtainable on the three high-dimensional datasets utilized while achieving competitive performance regarding the number of features selected.

Visual sensors can be used to retrieve still images or video streams in a large set of monitoring applications, providing valuable information of the monitored environment. In fact, camera-enabled sensors are directional and the viewed area depends on their orientations. As the positions and orientations of the embedded cameras may not be optimal after deployment, the area viewed by sensors may be adjusted using some optimization algorithm. Although the problem of coverage optimization has been addressed by some research works, coverage maximization arises as a challenging problem where the number of camera views over a set of targets has to be maximized for higher availability and increased number of viewed perspectives of targets. This paper proposes centralized algorithms to compute orientations of rotatable cameras to achieve maximized coverage in wireless visual sensor networks, bringing significant results to this research area.

This paper proposes a novel hybrid arithmetic–trigonometric optimization algorithm (ATOA) using different trigonometric functions for complex and continuously evolving real-time problems. The proposed algorithm adopts different trigonometric functions, namely sin, cos, and tan, with the conventional sine cosine algorithm (SCA) and arithmetic optimization algorithm (AOA) to improve the convergence rate and optimal search area in the exploration and exploitation phases. The proposed algorithm is simulated with 33 distinct optimization test problems consisting of multiple dimensions to showcase the effectiveness of ATOA. Furthermore, the different variants of the ATOA optimization technique are used to obtain the controller parameters for the real-time pressure process plant to investigate its performance. The obtained results have shown a remarkable performance improvement compared with the existing algorithms.

This study presents an advanced metaheuristic approach termed the Enhanced Gorilla Troops Optimizer (EGTO), which builds upon the Marine Predators Algorithm (MPA) to enhance the search capabilities of the Gorilla Troops Optimizer (GTO). Like numerous other metaheuristic algorithms, the GTO encounters difficulties in preserving convergence accuracy and stability, notably when tackling intricate and adaptable optimization problems, especially when compared to more advanced optimization techniques. Addressing these challenges and aiming for improved performance, this paper proposes the EGTO, integrating high and low-velocity ratios inspired by the MPA. The EGTO technique effectively balances exploration and exploitation phases, achieving impressive results by utilizing fewer parameters and operations. Evaluation on a diverse array of benchmark functions, comprising 23 established functions and ten complex ones from the CEC2019 benchmark, highlights its performance. Comparative analysis against established optimization techniques reveals EGTO's superiority, consistently outperforming its counterparts such as tuna swarm optimization, grey wolf optimizer, gradient based optimizer, artificial rabbits optimization algorithm, pelican optimization algorithm, Runge Kutta optimization algorithm (RUN), and original GTO algorithms across various test functions. Furthermore, EGTO's efficacy extends to addressing seven challenging engineering design problems, encompassing three-bar truss design, compression spring design, pressure vessel design, cantilever beam design, welded beam design, speed reducer design, and gear train design. The results showcase EGTO's robust convergence rate, its adeptness in locating local/global optima, and its supremacy over alternative methodologies explored.

Joint Opposite Selection (JOS): A premiere joint of selective leading opposition and dynamic opposite enhanced Harris’ hawks optimization for solving single-objective problems

The Sailfish Optimizer: A novel nature-inspired metaheuristic algorithm for solving constrained engineering optimization problems

The growing demand for rapid, same-day deliveries has made the optimization of last-mile Hyper-local Networks (HLN) increasingly critical. These networks face challenges such as limited storage capacity and highly variable customer demand, which complicates delivery planning and resource allocation. This study aims to address the HLN design problem under uncertain and fluctuating demand conditions, to enhance delivery efficiency and system robustness. To achieve this, we propose a novel meta-heuristic optimization algorithm: the Composite Learning Strategy Criminal Search Optimization Algorithm ( CLS − CSOA ), enhanced with a Time-varying Inertia Weight mechanism. This approach is designed to balance exploration and exploitation phases during optimization, thereby producing more efficient and adaptive solutions. We assess the method using a combination of benchmark functions and realistic last-mile delivery scenarios. Comparative experiments show that CLS − CSOA consistently outperforms conventional algorithms in solution quality, robustness, and computational efficiency. Statistical validation via the Wilcoxon Signed-Rank test confirms its superiority, with a notably low Type II error rate. Three real-world case studies, reflecting varying levels of customer demand, demonstrate the practical applicability of the model. The results show significant improvements in delivery performance and a reduction in computational time. Importantly, the algorithm maintains high performance under increasing demand variability, underscoring its scalability and adaptability. This research provides practical implications for urban logistics by offering a lightweight, high-performance alternative to data-intensive methods, supporting agile and cost-effective last-mile delivery systems, especially for small and medium-scale logistics providers.