• Home
  • Search
  • A reactive ion etch study for producing patterned platinum structures
  • Cite Icon28
  • https://doi.org/10.1080/10584589708013034Copy DOI Icon

A reactive ion etch study for producing patterned platinum structures

Show More
  • Abstract
  • Literature Map
  • References
  • Citations
  • Similar Papers
Abstract

Various high-density DRAM and FRAM technologies currently under investigation utilize high-dielectric constant materials requiring noble metal or refractory metal oxide electrodes. In this paper we describe a study of platinum patterning by reactive ion etching (RIE). Platinum films were etched in a rf diode parallel plate RIE tool with a grounded upper electrode and a 13.56 rf powered lower electrode upon which substrates were processed. The removal characteristics of blanket platinum films and platinum films with a patterned photoresist etch mask were investigated as a function of gas chemistry (Ar, CF4, SF6, and Cl2), rf power (100 to 680 W), gas pressure (5 to 100 mTorr), total gas flow (5 to 80 scan), and substrate temperature (21 to 300°C). The platinum etch was characterized in terms of etch rate, amount of redeposited material observed on the photoresist etch sidewalls (‘fencing'), and etch scale-up non-uniformity versus small size and feature size. Platinum etch rates from 80 to 1250 Å/minute were observed with corresponding substrate dc bias voltages of -500 to -1600 V. A computer program was developed to model the etch process. Computer modeling results were correlated with etched structures to optimize the etch process conditions. Optical emission spectroscopy (OES) was utilized to observe gas phase plasma species for chemical etching determination, and optimized as an optical endpoint monitor. Auger electron spectroscopy (AES) was implemented in chemically analyzing the redeposited ‘fence’ material. Using selected RIE process conditions, platinum films with a patterned photoresist etch mask were etched resulting in clean, residue-free structures with sidewall angles approximately 29°. Best process to date using a post-RIE cleanup yields sidewall angles approximately 69°.

Similar Papers
  • Research Article
  • Citations9

In Situ Monitoring of GaN Reactive Ion Etching by Optical Emission Spectroscopy

  • Apr 01, 2001
  • Japanese Journal of Applied Physics
  • Harumasa Yoshida +3
  • Research Article
  • Citations15

Etch characteristics of GaN and BN materials in chlorine-based plasmas

  • Sep 01, 2000
  • Journal of Electronic Materials
  • N Medelci +5
  • Research Article
  • Citations14

Comparisons of GaAs , Tungsten, and Photoresist Etch Rates and GaAs Surfaces Using RIE with CF 4, CF 4 + N 2, and SF 6 + N 2 Mixtures

  • Nov 01, 1985
  • Journal of The Electrochemical Society
  • Nobuhiko Susa
  • Research Article
  • Citations17

Comparison of etch rates of silicon nitride, silicon dioxide, and polycrystalline silicon upon O2 dilution of CF4 plasmas

  • Nov 01, 1989
  • Journal of Vacuum Science & Technology B: Microelectronics Processing and Phenomena
  • Paul E Riley +1
  • Research Article
  • Citations11

Reactive ion etching of ZnS films for thin-film electroluminescent devices

  • Oct 01, 1997
  • Materials Chemistry and Physics
  • S.H Su +2
  • Research Article
  • Citations24

Reactive Ion Etching of Co–Zr–Nb Thin Film Using BCl3

  • Jul 01, 1997
  • Japanese Journal of Applied Physics
  • Katsutaro Ichihara Katsutaro Ichihara +1
  • Conference Article
  • Citations2

In-situ prediction of RIE time to completion using neural networks

  • Sep 12, 1994
  • D Baker +2
  • Research Article
  • Citations43

Dry-etching processes for high-temperature superconductors

  • Oct 01, 1992
  • Physica C: Superconductivity
  • L Alff +8
  • Research Article
  • Citations101

Reactive ion etching of SiC thin films using fluorinated gases

  • Jan 01, 1986
  • Journal of Vacuum Science & Technology B: Microelectronics Processing and Phenomena
  • J Sugiura +3
  • Research Article
  • Citations25

Cr absorber etch process for extreme ultraviolet lithography mask fabrication

  • Nov 01, 2001
  • Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
  • K H Smith +4
  • Conference Article
  • Citations8

Highly Chemical Reactive Ion Etching of Silicon in CF4 Containing Plasmas

  • Nov 01, 2006
  • Siti Azlina Rosli +2
  • Conference Article
  • Citations1

Fabrication of vertically coupled InP microdisk resonators by using smooth, CH/sub 4/-based reactive ion etching methods

  • Nov 12, 2001
  • Seung June Choi +3
  • Research Article
  • Citations7

Plasma Etching of Silicon at a High Flow and a High Pressure of NF3 in Reactive Ion Etching

  • Jun 01, 2019
  • Journal of the Korean Physical Society
  • Hee-Tae Kwon +6
  • Research Article
  • Citations11

An experimental study of the reactive ion etching (RIE) of GaP using BCl 3 plasma processing

  • Aug 23, 2007
  • Materials Science and Engineering: B
  • S.-H Yang +1
  • Research Article
  • Citations13

Effect of temperature on etch rate of iridium and platinum in CF4/O2

  • Jul 01, 2001
  • Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films
  • Jer-Shen Maa +2
Cactus Communications logo

Copyright 2026 Cactus Communications. All rights reserved.