A ROS Implementation of the Mono-Slam Algorithm

This paper presents a sensor fusion strategy applied for Simultaneous Localization and Mapping (SLAM) in dynamic environments. The designed approach consists of two features: (i) the first one is a fusion module which synthesizes line segments obtained from laser rangefinder and line features extracted from monocular camera. This policy eliminates any pseudo segments that appear from any momentary pause of dynamic objects in laser data. (ii) The second characteristic is a modified multi-sensor point estimation fusion SLAM (MPEF-SLAM) that incorporates two individual Extended Kalman Filter (EKF) based SLAM algorithms: monocular and laser SLAM. The error of the localization in fused SLAM is reduced compared with those of individual SLAM. Additionally, a new data association technique based on the homography transformation matrix is developed for monocular SLAM. This data association method relaxes the pleonastic computation. The experimental results validate the performance of the proposed sensor fusion and data association method.

In this work, we tested Simultaneous localization and mapping (SLAM) about mobile robots in indoor environment, where all experiments were conducted based on the Robot Operating System (ROS). The urban search and rescue(USAR) environment was build in the ROS simulation tool Gazebo, and our car was used to test hector SLAM in Gazebo. The rplidar A1 single-line lidar was used for 2D laser scan matching data acquisition in the practical experiments and the indoor map was built by using the open source algorithms gmapping, karto SLAM, hector SLAM software package for indoor SLAM, which can get the indoor grid maps in ROS graphical tool RVIZ. The experimental results of the three open source algorithms show that the mobile robot for simultaneous localization and mapping (SLAM) is feasible, and high-precision grid maps can be constructed.

Simultaneous Localization and Mapping (SLAM) is one of the most challenging research areas within computer and machine vision for automated scene commentary and explanation. The SLAM technique has been a developing research area in the robotics context during recent years. By utilizing the SLAM method robot can estimate the different positions of the robot at the distinct points of time which can indicate the trajectory of robot as well as generate a map of the environment. SLAM has unique traits which are estimating the location of robot and building a map in the various types of environment. SLAM is effective in different types of environment such as indoor, outdoor district, Air, Underwater, Underground and Space. Several approaches have been investigated to use SLAM technique in distinct environments. The purpose of this paper is to provide an accurate perceptive review of case history of SLAM relied on laser/ultrasonic sensors and camera as perception input data. In addition, we mainly focus on three paradigms of SLAM problem with all its pros and cons. In the future, use intelligent methods and some new idea will be used on visual SLAM to estimate the motion intelligent underwater robot and building a feature map of marine environment.

Detecting glass in Simultaneous Localisation and Mapping

Sensor Technologies and Simultaneous Localization and Mapping (SLAM)

In recent years, the use of autonomous mobile robots has increased. SLAM (Simultaneous Localization and Mapping) technology is where an autonomous mobile robot estimates its own position and simultaneously maps the surrounding environment. It is widely used in robots that require autonomous movement. However, it is heavily burdened by computational tasks related to various types of image processing and calculations of physical environment recognition, which makes the system slow down due to limited hardware resources such as embedded systems. Various offload methods have been proposed, however they have not been applied to Robot Operating System (ROS) + SLAM applications and there are few examples of robot verification. To avoid the heavy load on the devices, we propose a method that takes the heavily load to the edge by using the prediction model based on the system resource information for a certain period related to SLAM processing. Based on preliminary experiences, we firstly develop a prediction model using system resource consumption data obtained from an actual SLAM execution and evaluate the prediction accuracy. The result shows that the accuracy varies as memory consumption increases, however the accuracy was high and useful in determining offload timing.

A modular software framework design that allows flexible implementation of eye-in-hand sensing and motion control for agricultural robotics in dense vegetation is reported. Harvesting robots in cultivars with dense vegetation require multiple viewpoints and on-line trajectory adjustments in order to reduce the amount of false negatives and correct for fruit movement. In contrast to specialised software, the framework proposed aims to support a wide variety of agricultural use cases, hardware and extensions. A set of Robotic Operating System (ROS) nodes was created to ensure modularity and separation of concerns, implementing functionalities for application control, robot motion control, image acquisition, fruit detection, visual servo control and simultaneous localisation and mapping (SLAM) for monocular relative depth estimation and scene reconstruction. Coordination functionality was implemented by the application control node with a finite state machine. In order to provide visual servo control and simultaneous localisation and mapping functionalities, off-the-shelf libraries Visual Servoing Platform library (ViSP) and Large Scale Direct SLAM (LSD-SLAM) were wrapped in ROS nodes. The capabilities of the framework are demonstrated by an example implementation for use with a sweet-pepper crop, combined with hardware consisting of a Baxter robot and a colour camera placed on its end-effector. Qualitative tests were performed under laboratory conditions using an artificial dense vegetation sweet-pepper crop. Results indicated the framework can be implemented for sensing and robot motion control in sweet-pepper using visual information from the end-effector. Future research to apply the framework to other use-cases and validate the performance of its components in servo applications under real greenhouse conditions is suggested.

This article presents the design and implementation of an autonomous navigation framework for a Quadrotor-Unmanned Aerial Vehicle (UAV) based on Simultaneous Localization and Mapping (SLAM). The proposed system leverages the Extended Kalman Filter (EKF)-SLAM algorithm, operating solely on LiDAR data and without reliance on GPS, making it highly suitable for navigation in GPS-denied or cluttered environments such as indoor settings, tunnels, and urban canyons. A dynamic model of the UAV is developed to describe its motion under 3-DoF, forming the basis for both simulation and control. The EKF-SLAM algorithm is implemented within the Robot Operating System (ROS) and tested using the Gazebo simulation environment. Experimental results confirm the algorithm’s effectiveness in real-time localization and 3D environment mapping using LiDAR data, even in the absence proprioceptive input sensor.

Autonomous service robots are gaining popularity as they find application in different sectors such as logistics, hospitality, medical, space exploration and military. It is widely seen that autonomous service robots help increase efficiency, reduce cost and ensure safer operations. Automating material handling operations in highly dynamic indoor environments is risky and involves use of complex algorithms. However, continuously advancing technologies and machine programming tend to overcome these challenges. The three essential functions of an autonomous robot are to identify its instantaneous location in three-dimensional space, generate the environment map and decide an optimal path for locomotion. Simultaneous Localization and Mapping (SLAM) is a widely used algorithm for navigation in unfamiliar environments. This chapter presents a cost-effective autonomous ground robot for automating material handling, transportation and other repetitive tasks in dynamically changing surroundings. The robot is programmed to map the indoor environment and localize itself in the workspace with the help of SLAM and Adaptive Monte Carlo Localization (AMCL). In addition, the robot can manoeuvre through the indoor workspace by avoiding static and dynamic obstacles. This work employs the GMapping open-source package in the Robot Operating System (ROS) for performing SLAM with the aid of a laser range finder, wheel odometry and inertial data. The GMapping algorithm uses a probabilistic approach to construct a map and estimate the robot’s location in two-dimensional space. In addition, this chapter presents an autonomous navigation feature with the help of the AMCL method for localizing the robot within an uncertain environment and making the robot move to its goal using move base actions in ROS. The path planning of the mobile robot is classified into global and local plans. The global plan is responsible for planning the path from the start point to the endpoint. The local plan is responsible for planning the actual movement of the robot by avoiding any dynamic obstacles not mapped earlier. This work uses the Dijistra algorithm for the global and the dynamic window approach (DWA) algorithm for the local path planning. The optimization algorithm minimizes the error between the global and local paths. The simulation study of the proposed algorithm is performed in a virtual environment called Gazebo in ROS, which is nearly similar to a real-time indoor workspace. Further, a robot prototype is fabricated, and its performance is evaluated in an unknown environment. The robot prototype is equipped with brushed DC motors with optical encoder feedback for wheel odometry (ODOM), Light Detection and Ranging (LiDAR), and Inertial Measurement Unit (IMU) sensors controlled using a Jetson Nano. The simulation and experimental results showcase the robot’s successful two-dimensional localization and navigation in the factory environment. The current system has the potential for indoor assistance during material transfer and logistic applications. Further upgrades to the system can make it usable for Automated Storage and Retrieval System (ASRS) applications in warehouses/factories.

ABSTRACTRecently, the Rao-Blackwellized particle filter (RBPF) has been used to solve the problem of simultaneous localization and mapping (SLAM). Using the odometer information of robot to calculate the proposed distribution requires a number of sampled particles, which increases the calculation complexity in the RBPF operation. In this paper, we integrate the odometer measurement and sensor observation into the proposed distribution, effectively reducing the particle sample scale. To reduce the inconsistency in the map model caused by the cumulative error of the odometer information of robot, we applied a gradient descent algorithm to fuse the sensor data to obtain the real-time attitude angle. This combination method, based on the robot operation system (ROS), runs on a platform of self-built mobile robot equipped with a laser rangefinder. The experimental results show that this method can realize the online real-time high-precision grid map which provides a new approach for robot navigation and SLAM.

To solve these problems of low accuracy of the proposed distribution, large number of particles required and particle degradation of traditional Rao-Blackwillised particle filter(RBPF), an improved RBPF simultaneous localization and mapping (SLAM) method based on lidar is proposed. The SLAM method uses the Point to Line Iterative closest point (PL-ICP) to register the laser scan data of two adjacent frames, and replaces the inter-frame matching result with the odometer reading to optimize the proposal distribution. Introducing a particle weight balancing strategy during sampling reduces the loss of particle diversity. The performance of the algorithm is verified by the robot operating system(ROS) and the differential robot platform. The experimental results show that the improved RBPF-SLAM method reduces the number of particles needed for mapping, and alleviates the problem of particle dissipation while improving the accuracy of interior mapping and location.

For autonomous navigation in workspace, a mobile robot has to be able to know its position in this space in a precise way that means that the robot must be able to self-localize to move and perform successfully the different entrusted tasks. At present, one of the most used systems in open spaces is the GPS navigation system; however, in indoor spaces (factories, buildings, hospitals, warehouses...) GPS signals are not operative because their intensity is too weak. The absence of GPS navigation systems in these environments has stimulated the development of new local positioning systems with their particular problems. Such systems have required in many cases the installation of beacons that operate like satellites (similar to GPS), the use of landmarks or even the use of other auxiliary systems to determine the robot’s position. The problem of mobile robot localization is a part of a more global problem because in autonomous navigation when a robot is exploring an unknown environment, it usually needs to obtain some important information: a map of the environment and the robot’s location in the map. Since mapping and localization are related to each other, these two problems are usually considered as a single problem called simultaneous localization and mapping (SLAM). The problem of Simultaneous Localization and Map Building is a significant open problem in mobile robotics which is difficult because of the following paradox: to localize itself the robot needs the map of the environment, and, for building a map the robot location must be known precisely. Mobile robots use different kinds of sensors to determine their position: for instance it is very common the use of odometric or inertial sensors, however it is remarkable to consider that in wheel slippage, sensor drifts a noise causing error accumulation, thus leading to erroneous estimates. Another kind of external sensors used in robotics in order to solve localization are for instance CCD cameras, infrared sensor, ultra sonic sensor, mechanical wave and laser. Other sensors recently applied are the instruments sensible to the magnetic field known as the electronic compass (Navarro & Benet, 2009). Mobile robotics are interested on those able to measure the Earths magnetic field and express it through an electrical signal. One type of electronic compass is based on magneto-resistive transducers, whose electrical resistance varies with the changes on the applied magnetic field. This type of sensors presents sensitivities below 0.1 milligauss, with response times below 1 sec, allowing its reliable use in vehicles moving at high speeds (Caruso, 2000). In SLAM some applications with electronic compass have been developed working simultaneously with other sensors such as artificial vision (Kim et al., 2006) and ultrasonic sensors (Kim et al., 2007).

One major challenge of 3DTV is content acquisition. Here, we present a method to acquire a realistic, visually convincing 3D model of indoor environments based on a mobile platform that is equipped with a laser range scanner and a panoramic camera. The data of the 2D laser scans are used to solve the simultaneous localization and mapping problem and to extract walls. Textures for walls and floor are built from the images of a calibrated panoramic camera. Multiresolution blending is used to hide seams in the generated textures. The scene is further enriched by 3D-geometry calculated from a graph cut stereo technique. We present experimental results from a moderately large real environment. 1

To navigate successfully, a mobile robot must be able to estimate the spatial relationships of the objects of interest accurately. A SLAM (Simultaneous Localization and Mapping) system employs its sensor data to build incrementally a map of an unknown environment and to localize itself in the map simultaneously. Thanks to recent advances in computer vision and cheaper cameras, vision sensors have become popular to solve SLAM problems. The proposed bearing-only SLAM system requires only a single camera which is simple and affordable for the navigation of domestic robots such as autonomous lawn-mowers and vacuum cleaners. Existing approaches to bearing-only SLAM require the readings from an odometer to estimate the robot locations prior to landmark initialization. This chapter presents a new 2-dimensional bearing-only SLAM system that relies only on the bearing measurements from a single camera. Our proposed system does not require any other sensors like range sensors or wheel encoders. The trade-off is that it requires the robot to be able to move in a straight line for a short while to initialize the landmarks. Once the landmark positions are estimated, localization becomes easy. The induced map created by our method is only determined up to a scale factor as only bearing information is used (no range or odometry information). All the object coordinates in the map multiplied by a scale factor would not change the bearing values.

With a combination of ant system and labeled multi-Bernoulli(LMB)filter, a novel framework is proposed for the problem of simultaneous localization and mapping (SLAM). Within the proposed framework, the locations and the number of features can be jointly estimated and managed by random finite set. Besides, a real-time moving ant estimator (RMAE) is employed to estimate moving vehicle trajectory. Compared to the recently developed methods, the proposed algorithm uses the artificial ants to take place of particles to gather around their areas of interest through ants' positive feedback search function, and thus ensure the perfect implementation of the algorithm in robot operating system(ROS). Experimental results provide a better map as well as an improved estimate accuracy of the vehicle's trajectory for the proposed approach, and the performance is better than both the PHD-SLAM and the LMB-SLAM.