Detecting glass in Simultaneous Localisation and Mapping

Simultaneous localization and mapping (SLAM) is an important problem to solve in robotics theory in order to build truly autonomous mobile robots. This work presents a novel method for implementing a SLAM system based on a single camera sensor. The SLAM with a single camera, or monocular SLAM, is probably one of the most complex SLAM variants. In this case, a single camera, which is freely moving through its environment, represents the sole sensor input to the system. The sensors have a large impact on the algorithm used for SLAM. Cameras are used more frequently, because they provide a lot of information and are well adapted for embedded systems: they are light, cheap and power-saving. Nevertheless, and unlike range sensors, which provide range and angular information, a camera is a projective sensor providing only angular measurements of image features. Therefore, depth information (range) cannot be obtained in a single step. In this case, special techniques for feature system-initialization are needed in order to enable the use of angular sensors (as cameras) in SLAM systems. The main contribution of this work is to present a novel and robust scheme for incorporating and measuring visual features in filtering-based monocular SLAM systems. The proposed method is based in a two-step technique, which is intended to exploit all the information available in angular measurements. Unlike previous schemes, the values of parameters used by the initialization technique are derived directly from the sensor characteristics, thus simplifying the tuning of the system. The experimental results show that the proposed method surpasses the performance of previous schemes.

In the last decades, Simultaneous Localization and Mapping (SLAM) proved to be a fundamental topic in the field of robotics, due to the many applications, ranging from autonomous driving to 3D reconstruction. Many systems have been proposed in literature exploiting a heterogeneous variety of sensors. State-of-the-art methods build their own map from scratch, using only data coming from the equipment of the robot, and not exploiting possible reconstructions of the environment. Moreover, temporary loss of data proves to be a challenge for SLAM systems, as it demands efficient re-localization to continue the localization process. In this paper, we present a SLAM system that exploits additional information coming from mapping services like OpenStreetMaps, hence the name OSM-SLAM, to face these issues. We extend an existing LiDAR-based Graph SLAM system, ART-SLAM, making it able to integrate the 2D geometry of buildings in the trajectory estimation process, by matching a prior OpenStreetMaps map with a single LiDAR scan. Each estimated pose of the robot is then associated with all buildings surrounding it. This association allows to improve localization accuracy, but also to adjust possible mistakes in the prior map. The pose estimates coming from SLAM are then jointly optimized with the constraints associated with the various OSM buildings, which can assume one of the following types: Buildings are always fixed (Prior SLAM); buildings surrounding a robot are movable in chunks, for every scan (Rigid SLAM); and every single building is free to move independently from the others (Non-rigid SLAM). Lastly, OSM maps can also be used to re-localize the robot when sensor data is lost. We compare the accuracy of the proposed system with existing methods for LiDAR-based SLAM, including the baseline, also providing a visual inspection of the results. The comparison is made by evaluating the estimated trajectory displacement using the KITTI odometry dataset. Moreover, the experimental campaign, along with an ablation study on the re-localization capabilities of the proposed system and its accuracy in loop detection-denied scenarios, allow a discussion about how the quality of prior maps influences the SLAM procedure, which may lead to worse estimates than the baseline.

A Simultaneous Localization and Mapping(SLAM) system is a complex program consisting of several interconnected components with different functionalities such as optimization, tracking or loop detection. Whereas the literature addresses in detail how enhancing the algorithmic aspects ofthe individual components improves SLAM performance, the modal aspects, such as when to localize, relocalize or close a loop, are usually left aside. In this paper, we address the modal aspects of a SLAM system and show that the design of the modal controller has a strong impact on SLAM performance in particular in terms of robustness against unforeseen events such as sensor failures, perceptual aliasing or kidnapping. We preset a novel taxonomy for the components of a modern SLAM system, investigate their interplay and propose a highly modular architecture of a generic SLAM system using the Unified Modeling LanguageTM(UML) state machine formalism. The result, called SLAM state machine, is compared to the modal controller of several state-of-the-art SLAM systems and evaluated in two experiments. We demonstrate that our state machine handles unforeseen events much more robustly than the state-of-the-art systems.

To navigate successfully, a mobile robot must be able to estimate the spatial relationships of the objects of interest accurately. A SLAM (Simultaneous Localization and Mapping) system employs its sensor data to build incrementally a map of an unknown environment and to localize itself in the map simultaneously. Thanks to recent advances in computer vision and cheaper cameras, vision sensors have become popular to solve SLAM problems. The proposed bearing-only SLAM system requires only a single camera which is simple and affordable for the navigation of domestic robots such as autonomous lawn-mowers and vacuum cleaners. Existing approaches to bearing-only SLAM require the readings from an odometer to estimate the robot locations prior to landmark initialization. This chapter presents a new 2-dimensional bearing-only SLAM system that relies only on the bearing measurements from a single camera. Our proposed system does not require any other sensors like range sensors or wheel encoders. The trade-off is that it requires the robot to be able to move in a straight line for a short while to initialize the landmarks. Once the landmark positions are estimated, localization becomes easy. The induced map created by our method is only determined up to a scale factor as only bearing information is used (no range or odometry information). All the object coordinates in the map multiplied by a scale factor would not change the bearing values.

The question of is central in the context of dense simultaneous localization and mapping (SLAM). Learning-based approaches have the potential to leverage data or task performance to directly inform the representation. However, blending representation learning approaches with classical SLAM systems has remained an open question, because of their highly modular and complex nature. A SLAM system transforms raw sensor inputs into a distribution over the state(s) of the robot and the environment. If this transformation (SLAM) were expressible as a differentiable function, we could leverage task-based error signals over the outputs of this function to learn representations that optimize task performance. However, this is infeasible as several components of a typical dense SLAM system are non-differentiable. In this work, we propose ∇SLAM (gradSLAM), a methodology for posing SLAM systems as differentiable computational graphs, which unifies gradient-based learning and SLAM. We propose differentiable trust-region optimizers, surface measurement and fusion schemes, and raycasting, without sacrificing accuracy. This amalgamation of dense SLAM with computational graphs enables us to backprop all the way from 3D maps to 2D pixels, opening up new possibilities in gradient-based learning for SLAM1.

A Simultaneous Localization and Mapping (SLAM) system must be robust to support long-term mobile vehicle and robot applications. However, camera and LiDAR based SLAM systems can be fragile when facing challenging illumination or weather conditions which degrade the utility of imagery and point cloud data. Radar, whose operating electromagnetic spectrum is less affected by environmental changes, is promising although its distinct sensor model and noise characteristics bring open challenges when being exploited for SLAM. This paper studies the use of a Frequency Modulated Continuous Wave radar for SLAM in large-scale outdoor environments. We propose a full radar SLAM system, including a novel radar motion estimation algorithm that leverages radar geometry for reliable feature tracking. It also optimally compensates motion distortion and estimates pose by joint optimization. Its loop closure component is designed to be simple yet efficient for radar imagery by capturing and exploiting structural information of the surrounding environment. Extensive experiments on three public radar datasets, ranging from city streets and residential areas to countryside and highways, show competitive accuracy and reliability performance of the proposed radar SLAM system compared to the state-of-the-art LiDAR, vision and radar methods. The results show that our system is technically viable in achieving reliable SLAM in extreme weather conditions on the RADIATE Dataset, for example, heavy snow and dense fog, demonstrating the promising potential of using radar for all-weather localization and mapping.

Simultaneous Localization and Mapping (SLAM) plays an important role in the computer vision and robotics field. The traditional SLAM framework adopts a strong static world assumption for analysis convenience. How to cope with dynamic environments is of vital importance and attracts more attentions. Existing SLAM systems toward dynamic scenes either solely utilize semantic information, solely utilize geometry information, or naively combine the results from them in a loosely coupled way. In this paper, we present SOF-SLAM: Semantic Optical Flow SLAM, a visual semantic SLAM system toward dynamic environments, which is built on RGB-D mode of ORB-SLAM2. A new dynamic features detection approach called semantic optical flow is proposed, which is a kind of tightly coupled way and can fully take advantage of feature's dynamic characteristic hidden in semantic and geometry information to remove dynamic features effectively and reasonably. The pixel-wise semantic segmentation results generated by SegNet serve as mask in the proposed semantic optical flow to get a reliable fundamental matrix, which is then used to filter out the truly dynamic features. Only the remaining static features are reserved in the tracking and optimization module to achieve accurate camera pose estimation in dynamic environments. Experiments on public TUM RGB-D dataset and in real-world environment are conducted. Compared with ORB-SLAM2, the proposed SOF-SLAM achieves averagely 96.73% improvements in high-dynamic scenarios. It also outperforms the other four state-of-the-art SLAM systems which cope with the dynamic environments.

The robot simultaneous localization and mapping (SLAM) is a very important and useful technology in the robotic field. However, the environmental map constructed by the traditional visual SLAM method contains little semantic information, which cannot satisfy the needs of complex applications. The semantic map can deal with this problem efficiently, which has become a research hot spot. This paper proposed an improved deep residual network- (ResNet-) based semantic SLAM method for monocular vision robots. In the proposed approach, an improved image matching algorithm based on feature points is presented, to enhance the anti-interference ability of the algorithm. Then, the robust feature point extraction method is adopted in the front-end module of the SLAM system, which can effectively reduce the probability of camera tracking loss. In addition, the improved key frame insertion method is introduced in the visual SLAM system to enhance the stability of the system during the turning and moving of the robot. Furthermore, an improved ResNet model is proposed to extract the semantic information of the environment to complete the construction of the semantic map of the environment. Finally, various experiments are conducted and the results show that the proposed method is effective.

Purpose – To build a persistent map with visual landmarks is one of the most important steps for implementing the visual simultaneous localization and mapping (SLAM). The corner detector is a common method utilized to detect visual landmarks for constructing a map of the environment. However, due to the scale-variant characteristic of corner detection, extensive computational cost is needed to recover the scale and orientation of corner features in SLAM tasks. The purpose of this paper is to build the map using a local invariant feature detector, namely speeded-up robust features (SURF), to detect scale- and orientation-invariant features as well as provide a robust representation of visual landmarks for SLAM. Design/methodology/approach – SURF are scale- and orientation-invariant features which have higher repeatability than that obtained by other detection methods. Furthermore, SURF algorithms have better processing speed than other scale-invariant detection method. The procedures of detection, description and matching of regular SURF algorithms are modified in this paper in order to provide a robust representation of visual landmarks in SLAM. The sparse representation is also used to describe the environmental map and to reduce the computational complexity in state estimation using extended Kalman filter (EKF). Furthermore, the effective procedures of data association and map management for SURF features in SLAM are also designed to improve the accuracy of robot state estimation. Findings – Experimental works were carried out on an actual system with binocular vision sensors to prove the feasibility and effectiveness of the proposed algorithms. EKF SLAM with the modified SURF algorithms was applied in the experiments including the evaluation of accurate state estimation as well as the implementation of large-area SLAM. The performance of the modified SURF algorithms was compared with those obtained by regular SURF algorithms. The results show that the SURF with less-dimensional descriptors is the most suitable representation of visual landmarks. Meanwhile, the integrated system is successfully validated to fulfill the capabilities of visual SLAM system. Originality/value – The contribution of this paper is the novel approach to overcome the problem of recovering the scale and orientation of visual landmarks in SLAM tasks. This research also extends the usability of local invariant feature detectors in SLAM tasks by utilizing its robust representation of visual landmarks. Furthermore, data association and map management designed for SURF-based mapping in this paper also give another perspective for improving the robustness of SLAM systems.

This paper presents a sensor fusion strategy applied for Simultaneous Localization and Mapping (SLAM) in dynamic environments. The designed approach consists of two features: (i) the first one is a fusion module which synthesizes line segments obtained from laser rangefinder and line features extracted from monocular camera. This policy eliminates any pseudo segments that appear from any momentary pause of dynamic objects in laser data. (ii) The second characteristic is a modified multi-sensor point estimation fusion SLAM (MPEF-SLAM) that incorporates two individual Extended Kalman Filter (EKF) based SLAM algorithms: monocular and laser SLAM. The error of the localization in fused SLAM is reduced compared with those of individual SLAM. Additionally, a new data association technique based on the homography transformation matrix is developed for monocular SLAM. This data association method relaxes the pleonastic computation. The experimental results validate the performance of the proposed sensor fusion and data association method.

Simultaneous Localization and Mapping (SLAM) is perhaps the most fundamental problem to solve in robotics in order to build truly autonomous mobile robots. The sensors have a large impact on the algorithm used for SLAM. Early SLAM approaches focused on the use of range sensors as sonar rings or lasers. However, cameras have become more and more used, because they yield a lot of information and are well adapted for embedded systems: they are light, cheap and power saving. Unlike range sensors which provide range and angular information, a camera is a projective sensor which measures the bearing of images features. Therefore depth information (range) cannot be obtained in a single step. This fact has propitiated the emergence of a new family of SLAM algorithms: the Bearing-Only SLAM methods, which mainly rely in especial techniques for features system-initialization in order to enable the use of bearing sensors (as cameras) in SLAM systems. In this work a novel and robust method, called Concurrent Initialization, is presented which is inspired by having the complementary advantages of the Undelayed and Delayed methods that represent the most common approaches for addressing the problem. The key is to use concurrently two kinds of feature representations for both undelayed and delayed stages of the estimation. The simulations results show that the proposed method surpasses the performance of previous schemes.

Simultaneous Localization and Mapping (SLAM) systems typically assume static, distant illumination; however, many real-world scenarios, such as endoscopy, subterranean robotics, and search & rescue in collapsed environments, require agents to operate with a co-located light and camera in the absence of external lighting. In such cases, dynamic near-field lighting introduces strong, view-dependent shading that significantly degrades SLAM performance. We introduce Near-Field Lighting Bundle Adjustment Loss (NFL-BA) which explicitly models near-field lighting as a part of Bundle Adjustment loss and enables better performance for scenes captured with dynamic lighting. NFL-BA can be integrated into neural rendering-based SLAM systems with implicit or explicit scene representations. Our evaluations mainly focus on endoscopy procedure where SLAM can enable autonomous navigation, guidance to unsurveyed regions, blindspot detections, and 3D visualizations, which can significantly improve patient outcomes and endoscopy experience for both physicians and patients. Replacing Photometric Bundle Adjustment loss of SLAM systems with NFL-BA leads to significant improvement in camera tracking, 37% for MonoGS and 14% for EndoGS, and leads to state-of-the-art camera tracking and mapping performance on the C3VD colonoscopy dataset. Further evaluation on indoor scenes captured with phone camera with flashlight turned on, also demonstrate significant improvement in SLAM performance due to NFL-BA.

Simultaneous Localization and Mapping (SLAM) is perhaps the most fundamental problem to solve in robotics in order to build truly autonomous mobile robots. The sensors have a large impact on the algorithm used for SLAM. In this work a novel method, called Filtered Inverse Depth Delayed (FIDD) Initialization which is intended for initializing new features in Bearing-Only SLAM systems. Unlike range sensors which provide range and angular information, a bearing sensor (e.g. cameras) measures only the bearing (angular information) of features. Therefore depth information (range) cannot be obtained in a single step. This fact has propitiated the emergence of a new family of SLAM algorithms: the Bearing-Only SLAM methods, which mainly rely in especial techniques for features system-initialization in order to enable the use of bearing sensors (as cameras) in SLAM systems. The proposed approach is based in an inverse depth parameterization and delayed initialization scheme. The main idea is to incorporate to the SLAM process, an extra uncorrelated filter, which progressively incorporates the new bearing measurements needed to estimate the full state of each new feature. Several simulations are given in order to show the performance of the proposed approach.

Mapping and navigating with mobile robots in scenarios with reduced visibility, e.g. due to smoke, dust, or fog, is still a big challenge nowadays. In spite of the tremendous advance on Simultaneous Localization and Mapping (SLAM) techniques for the past decade, most of current algorithms fail in those environments because they usually rely on optical sensors providing dense range data, e.g. laser range finders, stereo vision, LIDARs, RGB-D, etc., whose measurement process is highly disturbed by particles of smoke, dust, or steam. This article addresses the problem of performing SLAM under reduced visibility conditions by proposing a sensor fusion layer which takes advantage from complementary characteristics between a laser range finder (LRF) and an array of sonars. This sensor fusion layer is ultimately used with a state-of-the-art SLAM technique to be resilient in scenarios where visibility cannot be assumed at all times. Special attention is given to mapping using commercial off-the-shelf (COTS) sensors, namely arrays of sonars which, being usually available in robotic platforms, raise technical issues that were investigated in the course of this work. Two sensor fusion methods, a heuristic method and a fuzzy logic-based method, are presented and discussed, corresponding to different stages of the research work conducted. The experimental validation of both methods with two different mobile robot platforms in smoky indoor scenarios showed that they provide a robust solution, using only COTS sensors, for adequately coping with reduced visibility in the SLAM process, thus decreasing significantly its impact in the mapping and localization results obtained.

Simultaneous localization and mapping (SLAM) is a core element of every autonomous mobile robot. The underlying engine of a SLAM system is its back-end, which aims at optimally estimating the trajectory and map of the environment based on sensor data abstractions. Over the past decade, SLAM solutions based on graph optimization approaches prevailed over the filtering based solutions, since they dominated in performance over a wider range of applications. In this paper we propose a novel filtering based SLAM back-end based on the exactly sparse delayed state filter (ESDSF) derived on Lie groups (LG-ESDSF). The proposed filter retains all the good characteristics of the classic ESDSF, but also respects the state space geometry by employing filtering equations directly on Lie groups. We have compared our SLAM system with two current state-of-the-art SLAM solutions, namely ORB-SLAM and LSD-SLAM, on the KITTI vision benchmark suite. Test results show that the proposed SLAM based on the LG-ESDSF back-end can achieve same level of accuracy as the methods based on the graph optimization techniques, while maintaining lower computation times.