- Book Chapter
- 10.1007/978-981-19-1906-0_45
Process Corner Analysis for Recyclic Folded Cascode Operational Amplifiers at 180 nm SCL Technology
- Jul 12, 2022
- Jasdeep Kaur + 2 more +2
The paper presents a recyclic folded cascode amplifier which is an improved architecture of the conventional folded cascode amplifier. An improvement in DC gain, unity-gain bandwidth, slew rate, and common-mode rejection ratio is observed when compared to the conventional folded cascode amplifier with same power. The recyclic folded cascode architecture delivers gain as 75 dB, slew rate as 10.3 V/µs, unity-gain bandwidth as 8.3 MHz, and common-mode rejection ratio as 123.9 dB in simulation. The power consumption of the recyclic folded cascade is 12 µW with a power voltage of 1.8 V. Further, we designed a bandgap reference circuit using the low-power recyclic folded cascade amplifier. The circuit simulation delivers 633 mV of reference voltage with a coefficient of temperature 27 ppm/°C for the temperature range of 106 °C at 1.8 V supply voltage. The bandgap reference circuit consumed 83 µW of power. The simulation results are obtained in 180 nm SCL technology.KeywordsOperational transconductance amplifier (OTA)Voltage-controlled current sourceFolded cascode (FC)Recyclic folded cascode (RFC)Unity-gain bandwidthCurrent mirrorCommon-mode rejection ratio (CMRR)Process voltage temperature (PVT)
Read more