Absolute distance measurement based on laser self-mixing interferometry and deep neural network

Video hyperlinking represents a classical example of multimodal problems. Common approaches to such problems are early fusion of the initial modalities and crossmodal translation from one modality to the other. Recently, deep neural networks, especially deep autoencoders, have proven promising both for crossmodal translation and for early fusion via multimodal embedding. A particular architecture, bidirectional symmetrical deep neural networks, have been proven to yield improved multimodal embeddings over classical autoencoders, while also being able to perform crossmodal translation. In this work, we focus firstly at evaluating good single-modal continuous representations both for textual and for visual information. Word2Vec and paragraph vectors are evaluated for representing collections of words, such as parts of automatic transcripts and multiple visual concepts, while different deep convolutional neural networks are evaluated for directly embedding visual information, avoiding the creation of visual concepts. Secondly, we evaluate methods for multimodal fusion and crossmodal translation, with different single-modal pairs, in the task of video hyperlinking. Bidirectional (symmetrical) deep neural networks were shown to successfully tackle downsides of multimodal autoencoders and yield a superior multimodal representation. In this work, we extensively tests them in different settings, with different single-modal representations, within the context of video-hyperlinking. Our novel bidirectional symmetrical deep neural networks are compared to classical autoencoders and are shown to yield significantly improved multimodal embeddings that significantly (alpha=0.0001) outperform multimodal embeddings obtained by deep autoencoders with an absolute improvement in precision at 10 of 14.1% when embedding visual concepts and automatic transcripts and an absolute improvement of 4.3% when embedding automatic transcripts with features obtained with very deep convolutional neural networks, yielding 80% of precision at 10.

Automated image classification is an essential task of the computer vision field. The tagging of images into a set of predefined groups is referred to as image classification. The implementation of computer vision to automate image classification would be beneficial because manual image evaluation and identification can be time-consuming, particularly when there are many images of different classes. Deep learning approaches are proven to overperform existing machine learning techniques in many fields in recent years, and computer vision is one of the most notable examples. The very deep neural network (VDCNN) is a powerful deep learning model for image classification, and this paper examines it briefly using MNIST handwritten digit dataset. This dataset is used to prove the efficacy of very deep neural networks over other deep learning models. The proposed study aims to comprehend the very deep neural network architecture used to accomplish a handwritten digit recognition task. The feasibility of the proposed model is evaluated using mean accuracy, validation accuracy, and standard deviation. The study results of the very deep neural network model are compared to a convolutional neural network and convolutional neural network with batch normalization. According to the results of the comparison study, very deep neural networks achieve high accuracy of 99.1% for a handwritten dataset. The outcome of the proposed work is used to interpret how well a very deep neural network performs when compared to the other two models of deep neural networks. This proposed architecture may be used to automate the classification of handwritten digits dataset.

Deep Convolutional Neural Networks for Large-scale Speech Tasks

Maxout neurons for deep convolutional and LSTM neural networks in speech recognition

paper, we focus on exploring the relationship between weave patterns and their mechanical properties in woven fiber composites through Machine Learning. Specifically, we explore the interactions between woven architectures and in-plane stiffness properties through Deep Convolutional Neural Network (DCNN) and Generative Adversarial Network (GAN). Our research is important for exploring how woven composite’s pattern is related to its mechanical properties and accelerating woven composite design as well as optimization. We focus on two tasks: (1) Stiffness prediction: Predicting in-plane stiffness properties for given weave patterns. Our DCNN extracts high-level features through several convolutional and fully connected layers to determine the final predictions. (2) Weave pattern prediction: Predicting weave patterns for target stiffness properties, which can be treated as the reverse task of the first one. Due to many-to-one mapping between weave patterns and the composite properties, we utilize a Decoder Neural Network as our baseline model and compare its performance with GAN and Genetic Algorithm. We represent the weave patterns as 2D checkerboard models and use finite element analysis (FEA) to determine in-plane stiffness properties, which serve as input data for our ML framework. We show that: (1) for stiffness prediction, DCNN can predict stiffness values for a given weave pattern with relatively high accuracy (above 93%); (2) for weave pattern prediction, the GAN model gives the best prediction accuracy (above 92%) while Decoder Neural Network has the best time efficiency. HAOTIAN FENG

Evaluation of the benchmark datasets for testing the efficacy of deep convolutional neural networks

Deep convolutional neural networks have achieved great success in recent years. They have been widely used in various applications such as optical and SAR image scene classification, object detection and recognition, semantic segmentation, and change detection. However, deep neural networks rely on large-scale high-quality training data, and can only guarantee good performance when the training and test data are independently sampled from the same distribution. Deep convolutional neural networks are found to be vulnerable to subtle adversarial perturbations. This adversarial vulnerability prevents the deployment of deep neural networks in security-sensitive applications such as medical, surveillance, autonomous driving and military scenarios. This paper first presents a holistic view of security issues for deep convolutional neural network-based image recognition systems. The entire information processing chain is analyzed regarding safety and security risks. In particular, poisoning attacks and evasion attacks on deep convolutional neural networks are analyzed in detail. The root causes of adversarial vulnerabilities of deep recognition models are also discussed. Then, we give a formal definition of adversarial robustness and present a comprehensive review of adversarial attacks, adversarial defense, and adversarial robustness evaluation. Rather than listing existing research, we focus on the threat models for the adversarial attack and defense arms race. We perform a detailed analysis of several representative adversarial attacks on SAR image recognition models and provide an example of adversarial robustness evaluation. Finally, several open questions are discussed regarding recent research progress from our workgroup. This paper can be further used as a reference to develop more robust deep neural network-based image recognition models in dynamic adversarial scenarios.

Deep learning models are highly parameterized, resulting in difficulty in inference and transfer learning for image recognition tasks. In this work, we propose a layered pathway evolution method to compress a deep convolutional neural network (DCNN) for classification of masses in digital breast tomosynthesis (DBT). The objective is to prune the number of tunable parameters while preserving the classification accuracy. In the first stage transfer learning, 19 632 augmented regions-of-interest (ROIs) from 2454 mass lesions on mammograms were used to train a pre-trained DCNN on ImageNet. In the second stage transfer learning, the DCNN was used as a feature extractor followed by feature selection and random forest classification. The pathway evolution was performed using genetic algorithm in an iterative approach with tournament selection driven by count-preserving crossover and mutation. The second stage was trained with 9120 DBT ROIs from 228 mass lesions using leave-one-case-out cross-validation. The DCNN was reduced by 87% in the number of neurons, 34% in the number of parameters, and 95% in the number of multiply-and-add operations required in the convolutional layers. The test AUC on 89 mass lesions from 94 independent DBT cases before and after pruning were 0.88 and 0.90, respectively, and the difference was not statistically significant (p > 0.05). The proposed DCNN compression approach can reduce the number of required operations by 95% while maintaining the classification performance. The approach can be extended to other deep neural networks and imaging tasks where transfer learning is appropriate.

Deep convolutional neural networks have become a dominant solution for numerous image classification tasks. However, a main criticism is the poor explainability due to the black-box characteristic, which hurdles the extensive usage of deep convolutional neural networks. To address this issue, this paper proposes a new evolutionary multi-objective based method, which aims to explain the behaviours of deep convolutional neural networks by evolving local explanations on specific images. To the best of our knowledge, this is the first evolutionary multi-objective method to evolve local explanations. The proposed method is model-agnostic, i.e. it is applicable to explain any deep convolutional neural networks. ImageNet is used to examine the effectiveness of the proposed method. Three well-known deep convolutional neural networks -VGGNet, ResNet, and MobileNet, are chosen to demonstrate the modelagnostic characteristic. Based on the experimental results, it can be observed that the local explanations are understandable to end-users, who need to check the sensibility of the evolved explanations to decide whether to trust the predictions made by the deep convolutional neural networks. Furthermore, the local explanations evolved by the proposed method improves the confidence of deep convolutional neural networks making the predictions. Lastly, the pareto front and convergence analyses indicate that the proposed method can form a good set of nondominated solutions.

Gait recognition is a noncontact biometric procedure that determines the identity or health status of a person by analyzing his or her walking posture and habits, including skeletal and joint movements. The most remarkable feature of this method is the possibility of conducting recognition without demanding much cooperation from participants. Therefore, this recognition technique has attracted much attention from scholars. Additionally, because of the rapid development of graphics processing unit technology, related hardware and computation performance, the applications of deep-learning technology are considerably enhanced. The objective of this study was to apply a deep neural network (DNN), which employs deep-learning technology, to achieve gait-based automatic pedestrian detection and recognition. In contrast to using wearable devices to precisely capture skeletal and joint movements, pedestrian color-image sequences were used as input in this study. Subsequently, a pretraining convolutional neural network (CNN) was employed to capture pedestrian location and extract pedestrian dense optical flow to serve as concrete low-level feature inputs. Then, a finely-tuned DNN based on the wide residual network was employed to extract high-level abstract features. In addition, to overcome the difficulty of obtaining local temporal features by using a 2D CNN, part of the 3D convolutional structure was introduced into the CNN. This design enabled use of limited memory to acquire more effective features and enhance the DNN performance. The experimental results show that the proposed method has exceptional performance for pedestrian detection and recognition.

Experimental validation of saliency maps for understanding deep neural networks for weld penetration prediction

Chapter 2 - Intelligent Data Analytics for PV Fault Diagnosis Using Deep Convolutional Neural Network (ConvNet/CNN)

Identification of crops is an important topic in the agricultural domain. Hyperspectral remote sensing data are very useful for crop feature extraction and classification. Remote sensing data is an unstructured data and Convolutional Neural Network (CNN) can work on unstructured data efficiently. This paper presents an evaluation of CNN for crop classification using the Indian Pines standard dataset obtained from the AVIRIS sensor and the study area dataset obtained from the EO-1hyperion sensor. Optimized CNN has been tuned by training the model on different parameters. It has been compared with two classification algorithms: Deep Neural Network (DNN) and Convolutional Autoencoder. According to the test results, the proposed optimized CNN model provided better results as compared to the other two methods. CNN has given 97 ± 0.58% overall accuracy for the Indian Pines standard dataset and 78 ± 2.43% for our study area dataset.

(1) Background: Pyoderma gangrenosum (PG) is often situated on the lower legs, and the differentiation from conventional leg ulcers (LU) is a challenging task due to the lack of clear clinical diagnostic criteria. Because of the different therapy concepts, misdiagnosis or delayed diagnosis bears a great risk for patients. (2) Objective: to develop a deep convolutional neural network (CNN) capable of analysing wound photographs to facilitate the PG diagnosis for health professionals. (3) Methods: A CNN was trained with 422 expert-selected pictures of PG and LU. In a man vs. machine contest, 33 pictures of PG and 36 pictures of LU were presented for diagnosis to 18 dermatologists at two maximum care hospitals and to the CNN. The results were statistically evaluated in terms of sensitivity, specificity and accuracy for the CNN and for dermatologists with different experience levels. (4) Results: The CNN achieved a sensitivity of 97% (95% confidence interval (CI) 84.2−99.9%) and outperformed dermatologists, with a sensitivity of 72.7% (CI 54.4−86.7%) significantly (p < 0.03). However, dermatologists achieved a slightly higher specificity (88.9% vs. 83.3%). (5) Conclusions: For the first time, a deep neural network was demonstrated to be capable of diagnosing PG, solely on the basis of photographs, and with a greater sensitivity compared to that of dermatologists.

Brain tumor implies development of strange cells in brain. In cutting edge stages, brain tumor is most risky infection which can't be relieved. Thus, it ought to be identified in the beginning phases with the assistance of MRI (Magnetic Resonance Image). So, there will be more changes to the patient to endure. Quite possibly, the most functional and significant technique is to utilize Deep Neural Network (DNN). In this paper, a Deep Convolutional Neural Network (DCNN) based on VGG16 model has been developed to identify a tumor through brain Magnetic Resonance Imaging (MRI) dataset. In the clinical field, the strategies of machine learning (ML) and data mining hold a critical stand. It is effectively used to achieve the efficiency and exact location of tumor. The proposed technique involves automatic segmentation method based on Deep Convolution neural network (DCNN). It is layer based segmentation and classification technique. Different levels are engaged with the proposed technique, first step is data collection and then pre-processing &amp; average filtering is done, after that segmentation, feature extraction and classification via DCNN is performed. In this paper, a fresh technique for classification of brain MRI images has been proposed using DCNN based softmax Classifier. The proposed system has been compared with the existing ones. The results are really encouraging as the loss is reduced and accuracy is increased. The proposed system achieved the training accuracy of 98.9% and validation accuracy of 100%. The training loss is reduced up to 0.0230 and the validation loss reduced up to 0.0109.