ACI TYPE CF-8C

AISI Type 204 is a chromium-nickel-manganese type stainless steel comparable in properties to Type 304 stainless steel. It is austenitic, non-magnetic, and highly corrosion resistant. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-163. Producer or source: Stainless steel mills.

ARMCO 17-10P is an austenitic stainless steel that responds favorably to an age-hardening heat treatment. It is recommended for use in applications requiring high strength with low magnetic permeability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-69. Producer or source: Armco Inc., Eastern Steel Division.

UNILOY 19-9DL is a chromium-nickel heat resistant super alloy, capable of withstanding high static and dynamic stresses through at least 1200 deg. F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-19. Producer or source: Cyclops Corporation.

AISI Type 321 is a titanium stabilized 18-10 stainless steel having a maximum operating temperature of 1650 F. It is recommended for welded equipment and structures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-124. Producer or source: Stainless steel mills.

BERYLCO NICKEL ALLOY 440 is an age-hardenable nickel-beryllium-titanium alloy that offers high strength, excellent spring properties outstanding formability, good high-temperature mechanical properties, and resistance to corrosion and fatigue. Complex shapes can be produced in the solution-treated (soft) condition and then aged to a minimum tensile strength of 215,500 psi. It is used for mechanical and electrical/electronic components in the temperature range -320 to 800 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-94. Producer or source: Kawecki Berylco Industries Inc.. Originally published September 1964, revised September 1975.

AISI No. 651 is an austenitic iron-base superalloy with a relatively high ratio of strength to alloying element content. It is capable of withstanding high static and dynamic stresses through at least 1200 F. It is used for various high-temperature applications such as components for jet engines, gas turbines, turbochargers and missiles. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-478. Producer or source: Stainless steel mills.

U.S.S. 18-8 Ti is an austenitic chromium nickel steel containing titanium. It is recommended for parts fabricated by welding which cannot be subsequently annealed. It is also recommended for parts to be used at temperatures between 800 and 1650 deg. F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-43. Producer or source: United States Steel Corporation.

INCONEL Alloy 617 is a solid solution nickel-chromium-cobalt-molybdenum alloy having excellent high-temperature strength and oxidation resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-179. Producer or source: Huntington Alloy Products Division, An INCO Company.

ARMCO 400 is a low-chromium (low-cost) non-hardenable ferritic stainless steel with relatively high corrosion and oxidation resistance and good fabricating characteristics: This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: SS-250. Producer or source: Armco Steel Corporation, Advanced Materials Division.

ELEKTRON ZREO is a medium strength magnesium base casting alloy of very similar creep resistance to Elektron ZRE1 It possesses optimum corrosion resistance in marine type exposure environments with freedom from sporadic deep pitting combined with good castability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Mg-18. Producer or source: Aluminium Laboratories Ltd.

Cooper Alloy 14S is an abrasion, heat and corrosion resistant alloy steel containing 12% chromium. It can be hardened by heat treatment. It is recommended for pumps and valves in the cast form. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-158. Producer or source: Cooper Alloy Corporation.

CRUCIBLE A-55 is the general purpose grade of titanium for applications requiring moderate to severe forming. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive, shear, and bearing strength as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-62. Producer or source: Crucible Specialty Metals Division, Colt Industries.

NIMONIC 110 is a highly alloyed nickel-base alloy having high creep and oxidation resistance. It is recommended for aircraft gas turbine components to resist the stresses at the very high temperatures of operation. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-128. Producer or source: Henry Wiggin & Company Ltd.

KANTHAL-DS is a resistance alloy employed advantageously for heavily-stressed electric heating apparatus, and is particularly suitable for heating elements in industrial furnaces and ceramic kilns up to 2335 F. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as joining. Filing Code: SS-203. Producer or source: Aktiebolaget Kanthal.

ALUMINUM 850.0 is an aluminum-tin-nickel-copper alloy for bearings. It is used principally in the form of permanent-mold castings which, because of their rapid solidification, are characterized by a fine, dense, fatigue-resistant structure. Solid bearings machined from permanent-mold castings of this alloy are used principally in the artificially aged T5 temper for heavy-duty engine bearings. In this field Aluminum 850.0 alloy has provided satisfactory performance under conditions of very high unit loading at medium speeds and temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, forming, heat treating, machining, joining, and surface treatment. Filing Code: Al-252. Producer or source: Various aluminum companies.