CRUCIBLE A-55

AISI Type 204 is a chromium-nickel-manganese type stainless steel comparable in properties to Type 304 stainless steel. It is austenitic, non-magnetic, and highly corrosion resistant. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-163. Producer or source: Stainless steel mills.

ARMCO 400 is a low-chromium (low-cost) non-hardenable ferritic stainless steel with relatively high corrosion and oxidation resistance and good fabricating characteristics: This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: SS-250. Producer or source: Armco Steel Corporation, Advanced Materials Division.

NIMONIC 110 is a highly alloyed nickel-base alloy having high creep and oxidation resistance. It is recommended for aircraft gas turbine components to resist the stresses at the very high temperatures of operation. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-128. Producer or source: Henry Wiggin & Company Ltd.

MISCO-C is a 29% Cr-9% Ni type casting alloy having high corrosion and heat resistance. It is a type CE-30 stainless steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, and joining. Filing Code: SS-15. Producer or source: Michigan Steel Casting Company, Alloy Casting Division. Originally published June 1954, revised April 1965.

AISI Type 321 is a titanium stabilized 18-10 stainless steel having a maximum operating temperature of 1650 F. It is recommended for welded equipment and structures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-124. Producer or source: Stainless steel mills.

BERYLCO NICKEL ALLOY 440 is an age-hardenable nickel-beryllium-titanium alloy that offers high strength, excellent spring properties outstanding formability, good high-temperature mechanical properties, and resistance to corrosion and fatigue. Complex shapes can be produced in the solution-treated (soft) condition and then aged to a minimum tensile strength of 215,500 psi. It is used for mechanical and electrical/electronic components in the temperature range -320 to 800 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-94. Producer or source: Kawecki Berylco Industries Inc.. Originally published September 1964, revised September 1975.

Type CF-8C is an iron-chromium-nickel-columbium corrosion resistant casting alloy especially useful for field welding, or for service involving long exposure to elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: SS-235. Producer or source: Stainless steel foundries.

AISI No. 651 is an austenitic iron-base superalloy with a relatively high ratio of strength to alloying element content. It is capable of withstanding high static and dynamic stresses through at least 1200 F. It is used for various high-temperature applications such as components for jet engines, gas turbines, turbochargers and missiles. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-478. Producer or source: Stainless steel mills.

U.S.S. 18-8 Ti is an austenitic chromium nickel steel containing titanium. It is recommended for parts fabricated by welding which cannot be subsequently annealed. It is also recommended for parts to be used at temperatures between 800 and 1650 deg. F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-43. Producer or source: United States Steel Corporation.

INCONEL Alloy 617 is a solid solution nickel-chromium-cobalt-molybdenum alloy having excellent high-temperature strength and oxidation resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-179. Producer or source: Huntington Alloy Products Division, An INCO Company.

UNILOY 19-9DL is a chromium-nickel heat resistant super alloy, capable of withstanding high static and dynamic stresses through at least 1200 deg. F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-19. Producer or source: Cyclops Corporation.

PYROMET 901 is a nickel-chromium super alloy designed for high strength and corrosion resistance in the temperature range of 1000-1400 F. Compounds of Ni3 (Al, Ti) type produce the precipitation hardening. It is used in a variety of high-temperature applications such as components in aircraft and gas turbines. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-216. Producer or source: Carpenter Technology Corporation.

REMANIT 4565S is a fully austenitic stainless steel which features both high strength and excellent corrosion resistance in a wide range of corrosive media. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming and heat treating. Filing Code: SS-529. Producer or source: Thyssen Specialty Steels Inc..

ARMCO 17-10P is an austenitic stainless steel that responds favorably to an age-hardening heat treatment. It is recommended for use in applications requiring high strength with low magnetic permeability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-69. Producer or source: Armco Inc., Eastern Steel Division.

Inconel Alloy 725HS is a Ni-Cr-Mo-Cb alloy that is age hardenable and is a higher strength version of Inconel alloy 725 (see Alloy Digest Ni-445, January 1994). The alloy is corrosion resistant and is often used in fastener or marine fabrication applications. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as heat treating and machining. Filing Code: Ni-604. Producer or source: Special Metals Corporation.