Adaptive energy-harvesting aware clustering routing protocol for Wireless Sensor Networks

The technology of wireless sensor networks (WSNs) is in constant development and it made great progress in many applications. One of the most popular problems in WSNs is the limited energy storage power at every sensor node. This paper aims to propose and develop a new distributed clustering algorithm for energy harvesting wireless sensor networks denoted by DEH-WSN (Energy Harvesting for Distributed Clustering Wireless Sensor Networks Protocol) that relies on matching between clustering and energy harvesting in a distributed topology. DEH-WSN uses initial and residual energy capacity of the nodes to choose cluster heads. Simulation results prove that the proposed method increases network lifetime and the effective throughput.

Throughout the use of the small battery-operated sensor nodes encourage us to develop an energy-efficient routing protocol for wireless sensor networks (WSNs). The development of an energy-efficient routing protocol is a mainly adopted technique to enhance the lifetime of WSN. Many routing protocols are available, but the issue is still alive. Clustering is one of the most important techniques in the existing routing protocols. In the clustering-based model, the important thing is the selection of the cluster heads. In this paper, we have proposed a scheme that uses the bubble sort algorithm for cluster head selection by considering the remaining energy and the distance of the nodes in each cluster. Initially, the bubble sort algorithm chose the two nodes with the maximum remaining energy in the cluster and chose a cluster head with a small distance. The proposed scheme performs hierarchal routing and direct routing with some energy thresholds. The simulation will be performed in MATLAB to justify its performance and results and compared with the ECHERP model to justify its performance. Moreover, the simulations will be performed in two scenarios, gateway-based and without gateway to achieve more energy-efficient results.

Wireless sensor networks congestion occurs easily due to its centralized traffic pattern. Normally, mono-sync wireless sensor network experiences multiple traffic flow congestion in the dense environment of the network, which leads to excess energy consumption and severe packet loss. To overcome these issues, a congestion detection and alleviation mechanism using cluster based heuristic optimized hierarchical routing protocol is proposed in this paper. Here, congestion detection and alleviation utilize the features of sensor nodes. The congestion is categorized into two types: (i) node level congestion and (ii) link level congestion. The node level congestion is detected by assessing the buffer utilization and the interval amid the consecutive data packets. The link level congestion is considered with computing link usage utilizing back-off step of round robin carrier sense multi-access with collision avoidance. Congestion detection and alleviation reactively affected node/link through cuckoo hosted rider search multi-hop routing algorithm. It has two phases: the cluster head selection and multi-path routing. Cluster head selection is performed through Taylor multiple random forest kernel fuzzy C-means clustering algorithm and multi-path routing is performed through cuckoo hosted rider search multi-hop routing algorithm. The simulation of the proposed method is done in network simulator tool. Here, the performance metrics, like packet delivery ratio, delay, energy consumption, packet drop, overhead, network lifetime and throughput are calculated. The experimental outcomes of the proposed technique shows 11.6%, 18.4% and 28.1% lower delay, 78.2%, 65.4% and 52.6% higher packet delivery ratio, and 29.2%, 37.4% and 40.8% lower packet drop compared with the existing methods, like congestion detection and alleviation using multi-attribute decision-making in optimization-based hybrid congestion alleviation routing protocol in wireless sensor networks, congestion detection and alleviation using hybrid K-means with greedy best first search algorithms in packet rate reduction utilizing adaptive weight firefly algorithm ant colony optimization based routing protocol in wireless sensor networks and congestion detection and alleviation using multi-input time on task optimization algorithm for altered gravitational search algorithm routing protocol in wireless sensor networks.

Clustered routing protocols in wireless sensor networks (WSN) provide significant advantages in energy saving and data preprocessing. However, the communication greatly depends on cluster heads, which leads to severe security problems. In order to solve this problem, a clustered routing protocol with distributed intrusion detection for WSN (WSN_DID) is proposed in this paper. In WSN_DID all nodes are organized to identify intruding cluster heads in a distributed way by predistributed random keys. The experiments demonstrate that compared with classic cluster-based routing protocol in WSN, energy dissipation in WSN_DID is rather less and the toleration of intrusion is elevated.

QoSNET: An integrated QoS network for routing protocols in large scale wireless sensor networks

The existing routing protocols for wireless sensor networks were not reasonable in design, which limited their application. Most of the existing studies did not take into account the energy consumption of the network and the balanced use of the energy of sensor nodes, which led to the unsatisfactory application effect of wireless sensor networks in some fields. Therefore, from the perspective of energy balance in wireless sensor networks, this paper proposed a construction method of an energy balance routing protocol in wireless sensor networks based on a fuzzy control strategy. Firstly, based on the analysis of the basic composition of wireless sensor networks and the structure of sensor nodes, this paper expounded the basic process of wireless data transmission and summarized the classification and characteristics of routing protocols in wireless sensor networks from different angles. Secondly, according to the node data transmission characteristics of wireless sensor networks, the energy balance use model of sensor nodes was established, and the design method of the energy balance routing protocol based on fuzzy control strategy was proposed, and the data transmission link was optimized. Finally, through experimental comparative analysis, the results showed that the energy balanced routing protocol proposed in this paper can effectively realize the energy balanced use of the network data transmission process. Compared with other common routing protocols, the wireless sensor network routing protocol proposed in this paper can not only improve the data transmission efficiency and reduce the data redundancy but also save energy consumption and prolong the network running time. The design method of routing protocol proposed in this paper will be conducive to the optimization and application of routing protocol in wireless sensor networks and provide a theoretical basis for the related research of wireless sensor networks.

Wireless sensor networks are a new emerging area where swarm intelligence can be applied with interesting implications. In fact, a strong analogy between unicellular organism colonies and wireless sensor networks can be emphasized: a sensor network can be viewed as a “colony” of simple, scarce resource nodes that, autonomously, are able only to perform simple tasks, but all together can accomplish very complex problems. In this paper we propose a routing protocol for multisink Wireless Sensor Networks with interesting properties: self organization, fault tolerance and environmental adaptation. The proposed protocol was inspired by the well known behavior (in artificial life studies) of “Slime Mold”. Such colony of unicellular organisms organizes itself in clusters by pheromone generation and evaporation mechanisms. In a similar manner our protocol manages the data traffic towards multiple sink nodes using the gradient concept and reaching high levels of autonomy and fault tolerance. We analyze the proposed protocol to examine the performances, the signalling overhead and the adaptation properties to environmental changes or nodes faults using simulation techniques.

Recent advances in environmental sources harvesting technologies is a promising solution to provide sustainable energy sources for wireless sensor networks (WSN). Renewable energy sources such as solar, thermal and electromagnetic waves constitute viable alternatives to maximize the network lifetime. Therefore, networking software awareness and adaptability to energy availability conditions should translate into innovative supporting features for data gathering, aggregation, routing and dissemination. Thus, it is paramount to develop robust energy harvesting-aware networking platforms that support the above services and guarantee low energy consumption and data integrity in a noisy, constrained environment. In this paper, we present an opportunistic routing and data dissemination protocol for energy harvesting wireless sensor network (EH-WSN) based on cross-layer constructs that allows across the layers synchronization and coordination between the routing protocol and the application layer services. The OMNET++ based extensive simulation of this protocol showed promising results in terms of meeting application requirements of handling urgent traffic and delay tolerant traffic seamlessly and ensuring energy usage efficiency.

We consider cluster-based routing protocols for energy harvesting wireless sensor networks. Since the energy harvesting process does not match the real energy demand, sensor nodes suffer from occasional energy shortages, especially when they serve as cluster head (CH) nodes. To address this problem, we propose a cluster-based routing protocol referred to as distance-and-energy-aware routing with energy reservation (DEARER). The DEARER protocol encourages nodes with high energy-arrival rate or being close to the sink to serve as CH nodes. Also, DEARER allows non-CH nodes to reserve a portion of the harvested energy for future use. In doing so, the DEARER selects “enabler” nodes as CH nodes and provides them with more energy, thereby mitigating the energy shortage events at CH nodes. By theoretical analysis and numerical experiments, we demonstrate that the DEARER protocol outperforms direct transmission and also approaches the genie-aided routing, where CH nodes are selected based on the real-time energy information of each node.

Wireless Sensor Networks (WSNs) play a necessary position in todays actual world applications. WSNs are a team of autonomous sensor nodes that are geographically distributed to accumulate information and monitor events. WSNs are similarly sense that they rely on wireless connectivity and spontaneous formation of networks so that sensor information can be transported via wireless. Sometimes called dust network, minute sensors as small as dust referring to smart dust. WSNs are spatially distributed two to screen or bodily temperature, sound, pressure, etc. and to cooperatively ignore their data via the network to different locations. Each such sensor network node has typically various parts. Routing in WSNs in one of the important technique, because all node executes its battery power, if may be one node failure it collapse entire networks. Routing in WSNs is in reality difficult due to the intrinsic characteristics that differentiate these networks from different networks. The plan of routing protocols in WSN is affected via number of exigent factors. In this paper, a review on routing protocols for Wireless Sensor Networks (WSNs) and performance of its execution.

Aiming at the problem of load balancing and lifetime prolonging for wireless sensor networks (WSNs), and considering complex uncertainties existed in WSNs, this paper proposes a clustering routing protocol CRT2FLACO for WSN based on type-2 fuzzy logic and ant colony optimization (ACO). Specifically, in the cluster set-up phase, a type-2 Mamdnai fuzzy logic system (T2MFLS) is built to handle rule uncertainty better and balance the network load, in which three important factors - residual energy, the number of neighbor nodes and the distance to the base station (BS) of a node - are considered as inputs, and the probability of the node to be a candidate cluster head (CH) and the CH competition radius as outputs of our T2MFLS, to select the final CHs; in the steady-state phase, in order to reduce the transmission consumption, all the CHs are linked into a chain using ACO algorithm, then each CH send its data packet to the leader along link, which is a CH eventually transmitting packets to the BS. The simulation results show that the proposed routing protocol can effectively balance network load and reduce the transmission energy consumption of CHs, thus greatly prolong the lifetime of WSN.

Recent advances in wireless sensor networks have led to many new routing protocols where energy awareness and reliability are the important consideration. The paper analyzes the cluster-based and gradient-based routing protocol in wireless sensor network. The advantages and limitations of protocols have been found. For improving the ability of protocol, an improved clustering routing protocol is proposed and evaluated. It improves routing algorithm between cluster head nodes. By importing key nodes based on gradient, the improved protocol can save the energy and improves the reliability. Simulation results show the new routing protocol provides the longer lifetime and higher reliability.

Wireless sensor networks (WSNs) have gained much attention in today’s research domain for supporting a wide variety of applications including the multimedia applications. Multimedia applications that are regarded as the quality-of-service (QoS)-aware, delay sensitive, and bandwidth hungry applications require enough energy and communication resources. WSNs being the energy-scarce network have now been designed in such a way that they can support these delay-sensitive and time-critical applications. In this paper, we propose an energy-efficient routing protocol for heterogeneous WSNs to support the delay sensitive, bandwidth hungry, time-critical, and QoS-aware applications. The proposed QoS-aware and heterogeneously clustered routing (QHCR) protocol not only conserves the energy in the network, but also provides the dedicated paths for the real-time and delay sensitive applications. The inclusion of different energy-levels for the heterogeneous WSNs also provides the stability in the networks while minimizing the delay for the delay-sensitive applications. Extensive simulations have been performed to validate the effectiveness of our proposed scheme. Our proposed routing scheme outperforms other state-of-the-art schemes in terms of the delay performances.

<span lang="EN-US">Recent developments and widespread in wireless sensor network have led to many routing protocols, many of these protocols consider the efficiency of energy as the ultimate factor to maximize the WSN lifetime. The quality of Service (QoS) requirements for different applications of wireless sensor networks has posed additional challenges. Imaging and data transmission needs both QoS aware routing and energy to ensure the efficient use of sensors. In this paper, we propose an Efficient, Energy-Aware, Least Cost, (ECQSR) quality of service routing protocol for sensor networks which can run efficiently with best-effort traffic processing. The protocol aims to maximize the lifetime of the network out of balancing energy consumption across multiple nodes, by using the concept of service differentiation, finding lower cost by finding the shortest path using nearest neighbor algorithm (NN), also put certain constraints on the delay of the path for real-time data from where link cost that captures energy nodes reserve, energy of the transmission, error rate and other parameters. The results show that the proposed protocol improves the network lifetime and low power consumption.</span>

Wireless sensor networks (WSN) differ from traditional wireless communication networks in several characteristics. One of these characteristics is power awareness. In order to save the overall energy of the system and to fairly balance the load among nodes, we propose a new clustering routing protocol based on coverage control which incorporates two modules: (1) a scheduling mechanism based on binary particle swarm optimisation (PSO); (2) a cluster based protocol using fuzzy C-means (FCM) algorithm. Yet, in cluster based approach, the cluster head (CH) is usually selected amongst the sensor nodes which can die quickly for this extra workload. To mitigate this problem, we introduce some energy-harvesting (EH) nodes in the network which serve as CH. Since, the EH nodes are more expensive than the sensors, we study, in this paper, how to efficiently deploy EH nodes. Simulation results show that our protocol achieves an obvious improvement on the network lifetime.