Improved-Equalized Cluster Head Election Routing Protocol for Wireless Sensor Networks

The existing routing protocols for wireless sensor networks were not reasonable in design, which limited their application. Most of the existing studies did not take into account the energy consumption of the network and the balanced use of the energy of sensor nodes, which led to the unsatisfactory application effect of wireless sensor networks in some fields. Therefore, from the perspective of energy balance in wireless sensor networks, this paper proposed a construction method of an energy balance routing protocol in wireless sensor networks based on a fuzzy control strategy. Firstly, based on the analysis of the basic composition of wireless sensor networks and the structure of sensor nodes, this paper expounded the basic process of wireless data transmission and summarized the classification and characteristics of routing protocols in wireless sensor networks from different angles. Secondly, according to the node data transmission characteristics of wireless sensor networks, the energy balance use model of sensor nodes was established, and the design method of the energy balance routing protocol based on fuzzy control strategy was proposed, and the data transmission link was optimized. Finally, through experimental comparative analysis, the results showed that the energy balanced routing protocol proposed in this paper can effectively realize the energy balanced use of the network data transmission process. Compared with other common routing protocols, the wireless sensor network routing protocol proposed in this paper can not only improve the data transmission efficiency and reduce the data redundancy but also save energy consumption and prolong the network running time. The design method of routing protocol proposed in this paper will be conducive to the optimization and application of routing protocol in wireless sensor networks and provide a theoretical basis for the related research of wireless sensor networks.

Wireless sensor networks congestion occurs easily due to its centralized traffic pattern. Normally, mono-sync wireless sensor network experiences multiple traffic flow congestion in the dense environment of the network, which leads to excess energy consumption and severe packet loss. To overcome these issues, a congestion detection and alleviation mechanism using cluster based heuristic optimized hierarchical routing protocol is proposed in this paper. Here, congestion detection and alleviation utilize the features of sensor nodes. The congestion is categorized into two types: (i) node level congestion and (ii) link level congestion. The node level congestion is detected by assessing the buffer utilization and the interval amid the consecutive data packets. The link level congestion is considered with computing link usage utilizing back-off step of round robin carrier sense multi-access with collision avoidance. Congestion detection and alleviation reactively affected node/link through cuckoo hosted rider search multi-hop routing algorithm. It has two phases: the cluster head selection and multi-path routing. Cluster head selection is performed through Taylor multiple random forest kernel fuzzy C-means clustering algorithm and multi-path routing is performed through cuckoo hosted rider search multi-hop routing algorithm. The simulation of the proposed method is done in network simulator tool. Here, the performance metrics, like packet delivery ratio, delay, energy consumption, packet drop, overhead, network lifetime and throughput are calculated. The experimental outcomes of the proposed technique shows 11.6%, 18.4% and 28.1% lower delay, 78.2%, 65.4% and 52.6% higher packet delivery ratio, and 29.2%, 37.4% and 40.8% lower packet drop compared with the existing methods, like congestion detection and alleviation using multi-attribute decision-making in optimization-based hybrid congestion alleviation routing protocol in wireless sensor networks, congestion detection and alleviation using hybrid K-means with greedy best first search algorithms in packet rate reduction utilizing adaptive weight firefly algorithm ant colony optimization based routing protocol in wireless sensor networks and congestion detection and alleviation using multi-input time on task optimization algorithm for altered gravitational search algorithm routing protocol in wireless sensor networks.

QoSNET: An integrated QoS network for routing protocols in large scale wireless sensor networks

Wireless Sensor Networks (WSNs) play a necessary position in todays actual world applications. WSNs are a team of autonomous sensor nodes that are geographically distributed to accumulate information and monitor events. WSNs are similarly sense that they rely on wireless connectivity and spontaneous formation of networks so that sensor information can be transported via wireless. Sometimes called dust network, minute sensors as small as dust referring to smart dust. WSNs are spatially distributed two to screen or bodily temperature, sound, pressure, etc. and to cooperatively ignore their data via the network to different locations. Each such sensor network node has typically various parts. Routing in WSNs in one of the important technique, because all node executes its battery power, if may be one node failure it collapse entire networks. Routing in WSNs is in reality difficult due to the intrinsic characteristics that differentiate these networks from different networks. The plan of routing protocols in WSN is affected via number of exigent factors. In this paper, a review on routing protocols for Wireless Sensor Networks (WSNs) and performance of its execution.

Due to miniaturization of hardware and availability of low-cost, low-power sensors, Wireless Sensor Network and Multimedia Sensor Network applications are increasing day by day. Each application has a specific quality of service and experience requirements. The design of routing and MAC protocol which can fulfill the requirements of the application is challenging given the constrained nature of these devices. Considerable efforts are directed towards the design of energy efficient QoS-aware routing protocols. In this article, we present state of the art review of routing protocols for Wireless Multimedia Sensor Networks while addressing the challenges and providing insight into research issues.

In wireless sensor networks, prolonging the life time is an important research topic. Based on the study of LEACH protocol and EEUC protocol, a novel zone-divided and energy-balanced clustering routing protocol for wireless sensor networks (ZECR) is brought up. The protocol divides the area into several zones according to the distance, and uses the unequal clustering method among these zones to solve the hot spots problem caused by multi-hop mechanism. In the cluster head election phase, only the nodes that meet the energy standard can participate in the competition; in the inter-cluster multi-hop routing phase, the cluster heads with high residual energy in high energy region will be selected as the relay node based on the advantages of zone-divided. Simulation results show that the protocol can effectively balance the energy consumption of each part of the network, solve the hot spots problem, apply to the energy heterogeneous network and prolong the network life time obviously.

A genetic algorithm based distance-aware routing protocol for wireless sensor networks

The optimized link state routing (OLSR) protocol is widely used in wireless ad hoc networks. With OLSR, only one routing path from source to destination is established at a time. However, links of wireless networks are very unreliable, and network topologies might vary rapidly. These features may cause frequent data retransmissions or the route rebuilding. Hence, improving the network throughput becomes a big challenge. This paper designs a new high-throughput routing protocol (HTRP) for wireless sensor networks, which combines the OLSR protocol with opportunistic routing and network coding. Opportunistic routing is able to leverage the wireless channel's characteristic of broadcasting and opportunistically deliver data through multiple routing paths. And OLSR can provide the information about network topologies and other parameters that opportunistic routing needs but cannot gain by itself. We evaluate the performance through both simulation and empirical experiments. The throughput of the HTRP is more than 10× and 2× of the OLSR protocol respectively in simulation and experiments.

<span lang="EN-US">Recent developments and widespread in wireless sensor network have led to many routing protocols, many of these protocols consider the efficiency of energy as the ultimate factor to maximize the WSN lifetime. The quality of Service (QoS) requirements for different applications of wireless sensor networks has posed additional challenges. Imaging and data transmission needs both QoS aware routing and energy to ensure the efficient use of sensors. In this paper, we propose an Efficient, Energy-Aware, Least Cost, (ECQSR) quality of service routing protocol for sensor networks which can run efficiently with best-effort traffic processing. The protocol aims to maximize the lifetime of the network out of balancing energy consumption across multiple nodes, by using the concept of service differentiation, finding lower cost by finding the shortest path using nearest neighbor algorithm (NN), also put certain constraints on the delay of the path for real-time data from where link cost that captures energy nodes reserve, energy of the transmission, error rate and other parameters. The results show that the proposed protocol improves the network lifetime and low power consumption.</span>

Sensor networks are one of the fastest growing areas in broad wireless ad hoc networking field. A sensor node, typically, contains signal-processing circuits, micro-controllers and a wireless transmitter/receiver antenna. Energy saving is one of the critical issue for sensor networks since most sensors are equipped with non-rechargeable batteries that have limited lifetime. Routing schemes are used to transfer data collected by sensor nodes to base stations. In the literature many routing protocols for wireless sensor networks are suggested. In this work, four routing protocols for wireless sensor networks viz. flooding, Gossiping, GBR and LEACH have been simulated using TinyOS and their power consumption is studied using PowerTOSSIM. A realization of these protocols has been carried out using Mica2 Motes.

HEER – A delay-aware and energy-efficient routing protocol for wireless sensor networks

SummaryEnergy conservation and fault tolerance are two critical issues in the deployment of wireless sensor networks (WSNs). Many cluster‐based fault‐tolerant routing protocols have been proposed for energy conservation and network lifetime maximization in WSNs. However, these protocols suffer from high frequency of re‐clustering as well as extra energy consumption to tolerate failures and consider only some very normal parameters to form clusters without any verification of the energy sufficiency for data routing. Therefore, this paper proposes a cluster‐based fault‐tolerant routing protocol referred as CFTR. This protocol allows higher energy nodes to become Cluster Heads (CHs) and operate multiple rounds to diminish the frequency of re‐clustering. Additionally, for the sake to get better energy efficiency and balancing, we introduce a cost function that considers during cluster formation energy cost from sensor node to CH, energy cost from CH to sink, and another significant parameter, namely, number of cluster members in previous round. Further, the proposed CFTR takes care of nodes, which have no CH in their communication range. Also, it introduces a routing algorithm in which the decision of next hop CH selection is based on a cost function conceived to select routes with sufficient energy for data transfer and distribute uniformly the overall data‐relaying load among the CHs. As well, a low‐overhead algorithm to tolerate the sudden failure of CHs is proposed. We perform extensive simulations on CFTR and compare their results with those of two recent existing protocols to demonstrate its superiority in terms of different metrics.

Energy saving to prolong the network life is an important design issue while developing a new routing protocol for wireless sensor network. Clustering is a key technique for this and helps in maximizing the network lifetime and scalability. Most of the routing and data dissemination protocols of WSN assume a homogeneous network architecture, in which all sensors have the same capabilities in terms of battery power, communication, sensing, storage, and processing. Recently, there has been an interest in heterogeneous sensor networks, especially for real deployments. This research paper has proposed a new energy aware clustering protocol (EACP) for heterogeneous wireless sensor networks. Heterogeneity is introduced in EACP by using two types of nodes: normal and advanced. In EACP cluster heads for normal nodes are elected with the help of a probability scheme based on residual and average energy of the normal nodes. This will ensure that only the high residual normal nodes can become the cluster head in a round. Advanced nodes use a separate probability based scheme for cluster head election and they will further act as a gateway for normal cluster heads and transmit their data load to base station when they are not doing the duty of a cluster head. Finally a sleep state is suggested for some sensor nodes during cluster formation phase to save network energy. The performance of EACP is compared with SEP and simulation result shows the better result for stability period, network life and energy saving than SEP.

One of the most important topics in the field of wireless sensor networks is the development of approaches to improve network lifetime. In this paper, an energy-efficient control and routing protocol for wireless sensor networks is presented. This algorithm is based on reinforcement learning for energy management in the network. This protocol seeks to optimize routing policies to maximize the long-term reward received by each node, using reinforcement learning, which is a machine learning approach. In order to improve the lifetime of wireless sensor network, three energy management approaches have been proposed. The first approach is to navigate correctly using reinforcement learning to reduce the length of the routes and to improve energy consumption. The second approach is to exploit a sleep scheduling technique to improve node energy consumption. The last approach is used to restrict data transmission of each node based on the received data change rate. Simulation results show that in terms of network lifespan, the proposed method significantly outperforms previous reported methods.

In view of the routing protocols for wireless sensor networks with mobile sink, the paper classifies the protocols from the network structure and the node mobility pattern respectively. This paper analyzes the design requirements of routing protocols, introduces the characteristics of various protocols and the typical protocols, and analyzes the research ideas of the routing protocols for wireless sensor networks with mobile sink.