Adaptive robust control for maneuvering reentry vehicle basing on backstepping

In the paper, based on a combination of the robust control approach and an adaptive control technique, a design procedure of a new robust adaptive controller is proposed for power system load-frequency control with system parametric uncertainties. The system parametric uncertainties are obtained by changing parameters by 30% to 50% simultaneously from their typical values. In the design of the proposed controller, only the bounds of system parameters are required. The motivation of combining the robust control with an adaptive control is to use the robust control approach to deal with the small parametric uncertainties and to use the adaptive control for large parametric uncertainties so that stability of the overall system and good performance can both be achieved for all admissible uncertainties. The simulation results demonstrate that for the example system the proposed load-frequency controller can achieve good performance even in the presence of the generation rate constraint (GRC).

Robust adaptive integral backstepping control for opto-electronic tracking system based on modified LuGre friction model

This paper focuses on an adaptive robust dynamic surface control (ARDSC) with composite adaptation laws (CAL) for a class of uncertain nonlinear systems in semi‐strict feedback form. A simple and effective controller has been obtained by introducing dynamic surface control (DSC) technique and designing novel adaptation laws. First, the ‘explosion of terms’ problem caused by backstepping method in the traditional adaptive robust control (ARC) is avoided. Meanwhile, through a new proof philosophy the asymptotical output tracking that the ARC possesses is theoretically preserved. Second, when persistent excitation (PE) condition satisfies, true parameter estimates could be acquired via designing CALs which integrate the information of estimation errors. Finally, simulation results are presented to illustrate the effectiveness of the proposed method. Copyright © 2010 John Wiley & Sons, Ltd.

This paper aims at introducing H2 and H∞ robustness into the well-known characteristic model-based golden-section adaptive control law, and applying the robust adaptive control scheme to the attitude control of hypersonic cruise vehicles that are subject to external disturbances and aerodynamic coefficients uncertainties. When maneuvering at ultra high speeds, the attitude system of the hypersonic cruise vehicle is extremely sensitive to external disturbances and aerodynamic coefficients variations, and therefore the adaptiveness and the robustness of the attitude system are crucial during the controller design. To enhance the robustness of the existing golden-section adaptive control law, a golden-section robust adaptive control law is proposed. Compared to the existing control law where the design of the parameter λ depends on experience and is carried out offline, linear matrix inequality-based synthesis of λ is proposed such that the closed-loop system is stable with guaranteed H2 and H∞ performance. It is suitable for online computing and provides a time-varying λ(k) that is adjusted towards the optimal H2 and H∞ performance. When being applied to the attitude control of hypersonic vehicles during re-entry, the adaptive nature of the proposed control law provides the attitude system the capability to accommodate large flight conditions, and its H2 and H∞ robustness brought by λ(k) guarantees satisfying tracking performance in the presence of disturbances including both external disturbance and absolute aerodynamic coefficients errors.

In this article, a robust adaptive self-structuring fuzzy control (RASFC) scheme for the uncertain or ill-defined nonlinear, nonaffine systems is proposed. The RASFC scheme is composed of a robust adaptive controller and a self-structuring fuzzy controller. In the self-structuring fuzzy controller design, a novel self-structuring fuzzy system (SFS) is used to approximate the unknown plant nonlinearity, and the SFS can automatically grow and prune fuzzy rules to realise a compact fuzzy rule base. The robust adaptive controller is designed to achieve an L 2 tracking performance to stabilise the closed-loop system. This L 2 tracking performance can provide a clear expression of tracking error in terms of the sum of lumped uncertainty and external disturbance, which has not been shown in previous works. Finally, five examples are presented to show that the proposed RASFC scheme can achieve favourable tracking performance, yet heavy computational burden is relieved.

A pneumatic parallel platform driven by an air cylinder and three circumambient pneumatic muscles was considered. Firstly, a mathematical model of the pneumatic servo system was developed for the MIMO nonlinear model-based controller designed. The pneumatic muscles were controlled by three proportional position valves, and the air cylinder was controlled by a proportional pressure valve. As the forward kinematics of this structure had no analytical solution, the control strategy should be designed in joint space. A cross-coupling integral adaptive robust controller (CCIARC) which combined cross-coupling control strategy and traditional adaptive robust control (ARC) theory was developed by back-stepping method to accomplish trajectory tracking control of the parallel platform. The cross-coupling part of the controller stabilized the length error in joint space as well as the synchronization error, and the adaptive robust control part attenuated the adverse effects of modelling error and disturbance. The force character of the pneumatic muscles was difficult to model precisely, so the on-line recursive least square estimation (RLSE) method was employed to modify the model compensation. The projector mapping method was used to condition the RLSE algorithm to bound the parameters estimated. An integral feedback part was added to the traditional robust function to reduce the negative influence of the slow time-varying characteristic of pneumatic muscles and enhance the ability of trajectory tracking. The stability of the controller designed was proved through Laypunov’s theory. Various contrast controllers were designed to testify the newly designed components of the CCIARC. Extensive experiments were conducted to illustrate the performance of the controller.

In this paper, a novel adaptive robust control (ARC) scheme is proposed for electro-hydraulic servo systems (EHSSs) with uncertainties and disturbances. All dynamic functions in system dynamics are effectively approximated by multi-layer radial basis function neural network (RBF NN)-based approximators with online adaptive mechanisms. Moreover, neural network-based disturbance observers (NN-DOBs) are established to actively estimate and efficiently compensate for the effects of not only the matched/mismatched but also the imperfections of RBF NN-based approximators on the control system. Based on that, the nonlinear robust control law which integrates RBF NNs and NN-DOBs is synthesized via the sliding mode control (SMC) approach to guarantee the high-accuracy position tracking performance of the overall control system. Furthermore, the problem of the combination between DOBs and RBF NNs is first introduced in this paper to treat both disturbances and uncertainties in the EHSS. The stability of the recommended control mechanism is proven by using Lyapunov theory. Finally, numerical simulations with several distinct frequency levels of reference trajectory are conducted to convincingly demonstrate the effectiveness of the proposed approach.

In this paper, a quadrotor with two manipulators constrained on a straight path is modeled and a robust adaptive controller is proposed for it. Adding two manipulators to quadrotor increases its capabilities and applications in industry. Here, these two manipulators are used to place the robot on a constraint path so that the quadrotor can perform monitoring operations more accurately, because the under-actuated quadrotor becomes over-actuated by these constrained manipulators and one can use this feature to accurately control the position of the robot. Reduced form of motion equations are derived for the constrained quadrotor and based on this a robust adaptive controller is proposed. The nonlinear terms in the dynamic model are approximated by basic functions with constant weights and adaptive laws are designed by projection operator. Stability analysis is performed based on the Lyapunov theory. Evaluation of the presented controller is done by some numerical simulations. The simulation results showed that the robot tracks the reference path with bounded error in spite of dynamic uncertainties and wind force and satisfies the considered constraints.

This paper discusses a design method of a robust adaptive disturbance attenuating controller for nonlinear systems with uncertainty. The control scheme proposed by Shen et al. (1998) for nonlinear systems with relative degree 1 is extended to nonlinear systems with relative degree more than 1.

Adaptive robust motion control of linear motors for precision manufacturing

The design of a new hybrid controller for fractional-order uncertain chaotic systems with unknown time-varying delays

For the sake of safety, the vehicle path tracking control should not only ensure the stability of the path tracking error containing the lateral offset and the orientation error but also guarantee that both the transient and steady states of the lateral offset are within a specified safe boundary. However, the time‐varying uncertainties of a vehicle system make the control design a tough task. This paper develops an adaptive robust control (ARC) which guarantees both the tracking stability and the bounded error property for autonomous vehicles. First, to handle the bounded error requirement, a barrier function based state transformation which converts the constrained lateral offset into an unconstrained state is proposed. Then, the path tracking control task is cast into an equality constraint of the system state. On this basis, a novel adaptive robust constraint‐following controller is developed to make the transformed system follow the proposed equality constraint. Through Lyapunov minimax analysis, it is proved that the resulting control guarantees the approximate constraint‐following performance and the bounded error property despite the presence of system uncertainties. Finally, the main theoretical results are verified through CarSim‐Simulink co‐simulation results.

Liquid sloshing in moving or stationary containers and flexible uncertainty caused by the slosh are considered to be the most probable causing unexpected coupling effects on the dynamics of many systems such as aerospace, ground vehicles, and high speed industries arms. The coupling of dynamic liquid slosh in a container system with the uncertainty caused by the sensors or dampers is rare documented and this coupling can be considered as a highly nonlinear system. In this paper, an investigation is presented to demonstrate a new approach for enabling the reduction of the liquid slosh and uncertainty by implementing adaptive robust wavelet control technique. Starting by creating the mathematical dynamic model for the nonlinear slosh coupled by uncertainty, adaptive robust control based wavelet transform is applied for calculating optimal motion that minimize residual slosh and uncertainty. Subsequently the adaptive robust control based wavelet network approximation and the appropriate parameter algorithms for the container system with slosh and uncertainty are derived to achieve the feedback linearization, adaptive control, and H∞ tracking performance. The simulation results show that the effects of slosh errors and external uncertainty can be successfully attenuated within a desired attenuation level.

For floating production storage and offloading (FPSO) vessels, a dynamic positioning controller is necessary because using only a mooring system is not possible to keep the ship within a predefined region. Position control of the FPSO vessel is extremely challenging due to model uncertainties and unknown control coefficients. This paper develops a new robust adaptive positioning controller consisting of several components: adaptive law, dynamic surface control (DSC) technology, sigmoid tracking differentiator (STD), Nussbaum gain function, and structural reliability index. Model uncertainties can be estimated by the adaptive law derived from the Lyapunov theory. The DSC technology is used to eliminate repeated differentiation by introducing first-order filtering of the virtual control. The chattering-free STD with the characteristics of global fast convergence can estimate the derivatives of model uncertainties that are difficult to calculate directly. Therefore, the DSC and STD techniques make the proposed controller simpler to compute and easier to implement in engineering practice. Most of the traditional controllers require the information about the control coefficients to guarantee the stability of the closed-loop system while the Nussbaum gain function can remove the requirement for a priori knowledge of the sign of control coefficients. The capacity of the mooring system can be fully utilized to position the FPSO vessel by adjusting the structural reliability index on the premise of ensuring the safety of mooring lines, and hence less control effort is needed for the positioning controller. Simulations using two sets of system parameters demonstrate the proposed controller’s effectiveness. In addition, a qualitative comparison with the adaptive backstepping controller shows that our proposed controller is computationally more efficient and does not require a priori knowledge of the sign of control coefficients. A quantitative comparison with robust adaptive controller without the structural reliability shows that less control effort is needed using our proposed controller.

This paper addresses the trajectory tracking problem for an redundantly-actuated omnidirectional mobile manipulator system with uncertainties and disturbances. The proposed algorithm is robust adaptive control strategy and the parameter estimates are tuned online. First, for designing controller, the conservative upper-bounded function of dynamic model of omnidirectional mobile manipulator system is derived based on the dynamic structure properties. Then, a robust adaptive control scheme is presented to ensure trajectory tracking effect of this closed-loop system. The asymptotical stability is verified a Lyapunov method. Finally, simulation examples are given to demonstrate the proposed approach can guarantee the whole system converge to the desired manifold with prescribed performance.