Adaptive second order terminal sliding mode controller for robotic manipulators

The paper investigates a modified adaptive super-twisting sliding mode control (ASTSMC) for robotic manipulators with input saturation. To avoid singular perturbation while increasing the convergence rate, a modified sliding mode surface (SMS) is developed in this method. Using the proposed SMS, an ASTSMC is developed for robot manipulators, which not only achieves strong robustness but also ensures finite-time convergence. The boundary of lumped uncertainties cannot be easily obtained. A modified adaptive law is developed such that the boundaries of time-varying disturbance and its derivative are not required. Considering input saturation in practical cases, an ASTSMC with saturation compensation is proposed to reduce the effect of input saturation on tracking performances of robot manipulators. The finite-time convergence of the proposed scheme is analyzed. Through comparative simulations against two other sliding mode control schemes, the proposed method has been validated to possess strong adaptability, effectively adjusting control gains; simultaneously, it demonstrates robustness against disturbances and uncertainties.

ABSTRACTIn this article, we give some comments on the article ‘A new terminal sliding mode control for robotic manipulators’. The article presents a new terminal sliding mode control approach for global finite-time tracking of robotic manipulators. We point out a serious error occurred through the article, leading to the ineffectiveness of the proposed approach. A correction is proposed. Comparisons are presented.

This paper presents a novel adaptive fast-terminal neuro-sliding mode control (AFTN-SMC) for a two-link robot manipulator with unknown dynamics and external disturbances. The proposed controller is chattering-free and adaptive to the time-varying system uncertainties. Furthermore, the radial base function neural network (RBFNN) is employed to approximate the unknown state dynamics. The simulations have been completed in MATLAB, which illustrates the successful implementation of the proposed controller. The results showcased the effectiveness of the AFTN-SMC in achieving accurate tracking and stability, even in the presence of uncertainties and parameter variations. The incorporation of the RBFNN in the controller proved to be a valuable tool for approximating the unknown dynamics, enabling accurate estimation and control of the manipulator’s behavior. The research presented in this paper contributes to the advancement in control techniques for robot manipulators in diverse industrial and automation applications.

This paper intends to design and develop an adaptive fuzzy sliding mode controller (SMC) for robotic manipulator. Since it is not viable to pair the SMC operations with the system model every time, this paper adopts a Fuzzy Inference System (FIS) to replace the system model. It effectively achieves the experimentation in two phases. Accordingly, in the first phase, it attains the accurate features of the system model based on varied samples to characterize the robotic manipulator. In the second stage, it represents the derived fuzzy rules based on adaptive fuzzy membership functions. Moreover, it establishes the self-adaptiveness using Grey Wolf Optimization (GWO) to attain the adaptive fuzzy membership functions. The analysis distinguishes the efficiency of the adopted technique with the optimal investigational scheme and the traditional schemes such as SMC, Fuzzy SMC (FSMC) and GWO-SMC. Moreover, the comparative analysis is also performed by including the noise and validates the effectiveness of the proposed and conventional models. Index Terms : Sliding Mode Control, Robot manipulators, Controller, Noise.

In this paper, radial basis function network (RBFN) with sliding-mode controller (SMC) is designed to the joint position control of two-link robot manipulators for periodic motion and predefined trajectory tracking control. Radial basis function uses curve fitting mode to obtain the nonlinear mapping. The unavoidable learning procedure degrades its transient performance in the existence of disturbance. Sliding-mode control is effective in overcoming uncertainties and has a fast transient response, while the control effort is discontinuous and creates chattering. For this defect, a saturation function is utilized to improve it. The back-propagation (BP) algorithm and Lyapunov stability theorem are used to decide a suitable update law and sliding-mode switch gain, respectively. Thus, the satisfied performance will be obtained, which better than the controller with single RBFN controller, sliding mode controller. The simulated results of a two-link robotic manipulator for the joint frictions, changing link masses and adding external disturbances are provided to show that the effectiveness of the proposed control scheme.

This paper presents a sliding mode controller for trajectory tracking of robotic manipulators with actuator faults. To achieve finite-time convergence of tracking errors and desirable tracking precision, a fast nonsingular terminal sliding mode controller is designed. The uncertainty caused by actuator faults is transformed into system disturbance which is compensated by introducing the dynamic gain technique. As a result, the prior knowledge about upper bound of system disturbance is not required. Moreover, the sign function is replaced by the saturation function in the control law, so the chattering phenomenon is attenuated. Finally, the designed controller is applied to control a two-link robotic manipulator in simulation, and results validate the effectiveness of the control scheme.

Ahstract-This paper introduces a sliding mode control (SMC) strategy for robotic manipulators subject to uncertainties, disturbances, and input and output quantization. A continuous SMC method is proposed and a hysteretic quantizer with sector-bounded quantization errors is utilized to quantize the control input signal. Furthermore, a super-twisting algorithm (STA) based observer is adopted to estimate the unmeasured states by using quantized values of output signals. It is demonstrated that under the proposed SMC, the sliding variable can converge to a quasi sliding mode. Finally, a networked two-link robotic manipulator is used to verify the effectiveness of the proposed control method.

RBFNN-based nonsingular fast terminal sliding mode control for robotic manipulators including actuator dynamics

A sliding mode control based on motor angular speed control has been presented for a robot manipulator grasping a payload with mass variation. In order to guarantee the continuity of the control signals applied to the actuators of the robot manipulator, a sliding mode control with integral compensation is adopted. Improvement of robustness of the control system against payload mass variation is obtained by introducing a sliding mode feedforward signal. The control scheme is applied to a three joint robot manipulator, control performance both with payload torque compensation and without payload torque compensation are investigated. Simulation results show that the control scheme presented, is robust against payload mass variation and has satisfactory control performance.

This article aims at the problem of trajectory tracking for industrial robotic manipulators with control backlash. An arctangent terminal sliding mode surface is developed to deal with the lumped disturbance and enhance the robustness of the system. A novel adaptive super‐twisting sliding mode control method is developed to achieve fast convergence and continuous control. The chattering in control law is surmounted by using super‐twisting method. The lumped disturbance with unknown upper bound is compensated with the help of the adaptive technique. Based on the Lyapunov stability theory, the sliding mode surface will be arrived in a finite time and the trajectory tracking error will converge to zero in a finite time. The feasibility of the proposed control scheme is validated through an example of a two‐link robotic manipulator.

Real-time motion planning and control of multi-joint robot manipulators are studied using neural networks. The proposed neural network approach consists of two modules: one for real-time collision-free motion planning, the other for real-time fine control of the robot manipulators. The motion planning module is a biologically inspired, parallel connected, topologically organised neural network, where each neuron is characterised by a shunting equation, whose state space is the robot configuration joint space. This module is capable of planning a real-time optimal path for robot manipulators through the dynamic activity landscape of the neural network. The motion control module involves of a feedforward neural network together with a traditional PD feedback loop. It is capable of achieving real-time fine motion control of robot manipulators under significant uncertainties and without any prior knowledge of the robot dynamics. This module can quickly compensate sudden changes in the robot dynamics. The real-time fine control of robot manipulators is achieved through the online learning of the neural network. Both the motion planning and motion control modules are computationally efficient, and their global stabilities are proved using Lyapunov stability theory.

Robot manipulators as an indispensable part of automatic operation are becoming increasingly important in intelligent manufacturing systems, such as grinding and assembly. Although control methods of robot manipulators have been extensively studied, high-precision robots still face new challenges from uncertainties caused by changes in the environment and enhancement of interference. As a consequence, the neural network-based observer is utilized to reduce the influence of uncertainties and external disturbances. In this work, a new kind of nonlinear disturbance observer is designed which could well function with observed states. To improve the control efficiency and response characteristic, a kind of new integral sliding manifold is devised and the control input is generated via backstepping techniques. The stability is proved with Lyapunov theory, and the experimental results are given to demonstrate the effectiveness of the proposed controller.

This paper develops a novel non-singular terminal sliding mode control scheme for trajectory tracking of robot manipulators in the presence of external disturbances and uncertainties. Firstly, with the introduction of two nonlinear terms, a newly terminal sliding surface is designed. Then utilizing this sliding surface, a novel non-singular terminal sliding mode controller is proposed to eliminate the reaching interval, singularity issue and subsequently with this controller, the finite time error convergence is also assured. In the proposed controller, radial basis function neural network is employed to approximate highly uncertain nonlinear dynamics of robot manipulators using update laws derived with Lyapunov approach. Meanwhile, the effects of approximation errors are attenuated with $$H_\infty $$ performance criterion by introducing a robust term into the controller. As a result of proposed approach, asymptotic convergence of tracking errors is achieved within finite time and the approximation errors are attenuated to desired levels. The numerical simulation result shows the effectiveness of proposed controller for the case of microbot type robot manipulator.

We propose an integral sliding mode control for robot manipulators guaranteeing that sliding motion exists starting from an initial time. Also, we prove the asymptotic stability for robot manipulators using three important properties in the robot dynamics: skew-symmetry, positive-definiteness, and boundedness of robot parameter matrices. From illustrative examples, we show that the proposed method effectively controls for robot manipulators.

In this paper, advanced interval type-2 fuzzy sliding mode control (AIT2FSMC) for robot manipulator is proposed. The proposed AIT2FSMC is a combination of interval type-2 fuzzy system and sliding mode control. For resembling a feedback linearization (FL) control law, interval type-2 fuzzy system is designed. For compensating the approximation error between the FL control law and interval type-2 fuzzy system, sliding mode controller is designed, respectively. The tuning algorithms are derived in the sense of Lyapunov stability theorem. Two-link rigid robot manipulator with nonlinearity is used to test and the simulation results are presented to show the effectiveness of the proposed method that can control unknown system well.