Sliding Mode Control for Robotic Manipulators with Input and Output Quantization

The paper investigates a modified adaptive super-twisting sliding mode control (ASTSMC) for robotic manipulators with input saturation. To avoid singular perturbation while increasing the convergence rate, a modified sliding mode surface (SMS) is developed in this method. Using the proposed SMS, an ASTSMC is developed for robot manipulators, which not only achieves strong robustness but also ensures finite-time convergence. The boundary of lumped uncertainties cannot be easily obtained. A modified adaptive law is developed such that the boundaries of time-varying disturbance and its derivative are not required. Considering input saturation in practical cases, an ASTSMC with saturation compensation is proposed to reduce the effect of input saturation on tracking performances of robot manipulators. The finite-time convergence of the proposed scheme is analyzed. Through comparative simulations against two other sliding mode control schemes, the proposed method has been validated to possess strong adaptability, effectively adjusting control gains; simultaneously, it demonstrates robustness against disturbances and uncertainties.

This paper presents a sliding mode controller for trajectory tracking of robotic manipulators with actuator faults. To achieve finite-time convergence of tracking errors and desirable tracking precision, a fast nonsingular terminal sliding mode controller is designed. The uncertainty caused by actuator faults is transformed into system disturbance which is compensated by introducing the dynamic gain technique. As a result, the prior knowledge about upper bound of system disturbance is not required. Moreover, the sign function is replaced by the saturation function in the control law, so the chattering phenomenon is attenuated. Finally, the designed controller is applied to control a two-link robotic manipulator in simulation, and results validate the effectiveness of the control scheme.

In this paper, radial basis function network (RBFN) with sliding-mode controller (SMC) is designed to the joint position control of two-link robot manipulators for periodic motion and predefined trajectory tracking control. Radial basis function uses curve fitting mode to obtain the nonlinear mapping. The unavoidable learning procedure degrades its transient performance in the existence of disturbance. Sliding-mode control is effective in overcoming uncertainties and has a fast transient response, while the control effort is discontinuous and creates chattering. For this defect, a saturation function is utilized to improve it. The back-propagation (BP) algorithm and Lyapunov stability theorem are used to decide a suitable update law and sliding-mode switch gain, respectively. Thus, the satisfied performance will be obtained, which better than the controller with single RBFN controller, sliding mode controller. The simulated results of a two-link robotic manipulator for the joint frictions, changing link masses and adding external disturbances are provided to show that the effectiveness of the proposed control scheme.

This paper intends to design and develop an adaptive fuzzy sliding mode controller (SMC) for robotic manipulator. Since it is not viable to pair the SMC operations with the system model every time, this paper adopts a Fuzzy Inference System (FIS) to replace the system model. It effectively achieves the experimentation in two phases. Accordingly, in the first phase, it attains the accurate features of the system model based on varied samples to characterize the robotic manipulator. In the second stage, it represents the derived fuzzy rules based on adaptive fuzzy membership functions. Moreover, it establishes the self-adaptiveness using Grey Wolf Optimization (GWO) to attain the adaptive fuzzy membership functions. The analysis distinguishes the efficiency of the adopted technique with the optimal investigational scheme and the traditional schemes such as SMC, Fuzzy SMC (FSMC) and GWO-SMC. Moreover, the comparative analysis is also performed by including the noise and validates the effectiveness of the proposed and conventional models. Index Terms : Sliding Mode Control, Robot manipulators, Controller, Noise.

A sliding mode control based on motor angular speed control has been presented for a robot manipulator grasping a payload with mass variation. In order to guarantee the continuity of the control signals applied to the actuators of the robot manipulator, a sliding mode control with integral compensation is adopted. Improvement of robustness of the control system against payload mass variation is obtained by introducing a sliding mode feedforward signal. The control scheme is applied to a three joint robot manipulator, control performance both with payload torque compensation and without payload torque compensation are investigated. Simulation results show that the control scheme presented, is robust against payload mass variation and has satisfactory control performance.

This article aims at the problem of trajectory tracking for industrial robotic manipulators with control backlash. An arctangent terminal sliding mode surface is developed to deal with the lumped disturbance and enhance the robustness of the system. A novel adaptive super‐twisting sliding mode control method is developed to achieve fast convergence and continuous control. The chattering in control law is surmounted by using super‐twisting method. The lumped disturbance with unknown upper bound is compensated with the help of the adaptive technique. Based on the Lyapunov stability theory, the sliding mode surface will be arrived in a finite time and the trajectory tracking error will converge to zero in a finite time. The feasibility of the proposed control scheme is validated through an example of a two‐link robotic manipulator.

Adaptive second order terminal sliding mode controller for robotic manipulators

ABSTRACTIn this article, we give some comments on the article ‘A new terminal sliding mode control for robotic manipulators’. The article presents a new terminal sliding mode control approach for global finite-time tracking of robotic manipulators. We point out a serious error occurred through the article, leading to the ineffectiveness of the proposed approach. A correction is proposed. Comparisons are presented.

RBFNN-based nonsingular fast terminal sliding mode control for robotic manipulators including actuator dynamics

The stabilization and disturbance rejection of the translational oscillator with a rotating actuator (TORA) are considered in this paper. To deal with the control issues, a novel continuous sliding mode control method is designed for the TORA system. Compared with existing sliding mode control methods for the TORA system, the proposed method here is continuous. Specifically, first, a global diffeomorphism is introduced for the model of the TORA system. Then, an elaborate sliding manifold is constructed, and a continuous sliding mode control scheme is developed to ensure the convergence of the sliding manifold. Furthermore, rigorous theoretical analysis is given. Finally, simulation tests are carried out, and the obtained simulation results demonstrate that the proposed method exhibits superior stabilization control performance and strong robustness.

This paper presents a novel adaptive fast-terminal neuro-sliding mode control (AFTN-SMC) for a two-link robot manipulator with unknown dynamics and external disturbances. The proposed controller is chattering-free and adaptive to the time-varying system uncertainties. Furthermore, the radial base function neural network (RBFNN) is employed to approximate the unknown state dynamics. The simulations have been completed in MATLAB, which illustrates the successful implementation of the proposed controller. The results showcased the effectiveness of the AFTN-SMC in achieving accurate tracking and stability, even in the presence of uncertainties and parameter variations. The incorporation of the RBFNN in the controller proved to be a valuable tool for approximating the unknown dynamics, enabling accurate estimation and control of the manipulator’s behavior. The research presented in this paper contributes to the advancement in control techniques for robot manipulators in diverse industrial and automation applications.

Robot manipulators as an indispensable part of automatic operation are becoming increasingly important in intelligent manufacturing systems, such as grinding and assembly. Although control methods of robot manipulators have been extensively studied, high-precision robots still face new challenges from uncertainties caused by changes in the environment and enhancement of interference. As a consequence, the neural network-based observer is utilized to reduce the influence of uncertainties and external disturbances. In this work, a new kind of nonlinear disturbance observer is designed which could well function with observed states. To improve the control efficiency and response characteristic, a kind of new integral sliding manifold is devised and the control input is generated via backstepping techniques. The stability is proved with Lyapunov theory, and the experimental results are given to demonstrate the effectiveness of the proposed controller.

Robotic manipulator is a multi-input multi-output (MIMO), highly nonlinear and coupled system. Controlling this system always has been a challenging task for control engineers. In this paper, sliding mode control (SMC) technique utilizing Proportional and Derivative (PD) surface with different reaching laws has been applied on a two-link planar rigid robotic manipulator. Performance of PD sliding surface has been investigated with three different control laws namely, constant rate, exponential and power rate reaching law. Stability of the studied controller configurations have been demonstrated using Lyapunov theory. One of the major problems in SMC, “chattering” is reduced by introducing boundary layer in the controller. Genetic Algorithm optimization technique is used for tuning of parameters of SMC and boundary layer in all the cases for minimum Integral Absolute Error and chattering. Simulation results revealed that all the investigated laws performed equally for set-point tracking and the constant rate reaching law outperforms the other two laws for noise suppression. Also, all three reaching control laws of SMC offered significantly enhanced trajectory tracking and chattering performance as compared to recent literature.

This article presents an original motion control strategy for robot manipulators based on the coupling of the inverse dynamics method with the so-called second-order sliding mode control approach. Using this method, in principle, all the coupling non-linearities in the dynamical model of the manipulator are compensated, transforming the multi-input non-linear system into a linear and decoupled one. Actually, since the inverse dynamics relies on an identified model, some residual uncertain terms remain and perturb the linear and decoupled system. This motivates the use of a robust control design approach to complete the control scheme. In this article the sliding mode control methodology is adopted. Sliding mode control has many appreciable features, such as design simplicity and robustness versus a wide class of uncertainties and disturbances. Yet conventional sliding mode control seems inappropriate to be applied in robotics since it can generate the so-called chattering effect, which can be destructive for the controlled robot. In this article, this problem is suitably circumvented by designing a second-order sliding mode controller capable of generating a continuous control law making the proposed sliding mode controller actually applicable to industrial robots. To build the inverse dynamics part of the proposed controller, a suitable dynamical model of the system has been formulated, and its parameters have been accurately identified relying on a practical MIMO identification procedure recently devised. The proposed inverse dynamics-based second-order sliding mode controller has been experimentally tested on a COMAU SMART3-S2 industrial manipulator, demonstrating the tracking properties and the good performances of the controlled system.

This paper develops a novel non-singular terminal sliding mode control scheme for trajectory tracking of robot manipulators in the presence of external disturbances and uncertainties. Firstly, with the introduction of two nonlinear terms, a newly terminal sliding surface is designed. Then utilizing this sliding surface, a novel non-singular terminal sliding mode controller is proposed to eliminate the reaching interval, singularity issue and subsequently with this controller, the finite time error convergence is also assured. In the proposed controller, radial basis function neural network is employed to approximate highly uncertain nonlinear dynamics of robot manipulators using update laws derived with Lyapunov approach. Meanwhile, the effects of approximation errors are attenuated with $$H_\infty $$ performance criterion by introducing a robust term into the controller. As a result of proposed approach, asymptotic convergence of tracking errors is achieved within finite time and the approximation errors are attenuated to desired levels. The numerical simulation result shows the effectiveness of proposed controller for the case of microbot type robot manipulator.