All-fibred, telecom technology compatible, room temperature single-photon source.

Single photons are the key ingredient for many photonic quantum technologies including quantum key distribution and measurement-based quantum computing. However, it remains difficult to create devices with the appropriate specifications for use in non-laboratory environments. The optical microcavity platform provides an attractive route towards a room temperature single photon source device. Our ultra-small focused ion beam (FIB) milled open-access cavities offer enhancement of the spontaneous emission rate, tunability of the emission spectrum and increased light collection. The embedment of solid-state emitters within these cavities enables us to create a robust room temperature single photon source device, with the potential for high efficiencies and single photon purities. Defects such as the nitrogen-vacancy (NV) centre in diamond have been shown to be stable room-temperature sources of single photons. There are new single emitters emerging in two-dimensional materials such as hexagonal boron nitride (hBN). Here we present developments in room-temperature coupling of single defects to open-access microcavities of a planar-hemispherical geometry with mode volumes down to λ3. We report enhancements in the spectral density of photons into a single cavity mode, combined with improved single photon purities. It will be shown that the NV-cavity system provides a ~3% single photon emission efficiency with purities of up to 94%. The hBN-cavity system provides count rates >1Mcts/s into a single cavity mode with purities up to 96%. With these high single photon purities, such devices would be robust against photon number splitting attacks making them attractive for applications in quantum cryptography.

As currently implemented, single-photon sources cannot be made to produce single photons with high probability, while simultaneously suppressing the probability of yielding two or more photons. Because of this, single photon sources cannot really produce single photons on demand. We describe a multiplexed system that allows the probabilities of producing one and more photons to be adjusted independently, enabling a much better approximation of a source of single photons on demand. The scheme uses a heralded photon source based on parametric downconversion, but by effectively breaking the trigger detector area into multiple regions, we are able to extract more information about a heralded photon than is possible with a conventional arrangement. This scheme allows photons to be produced along with a quantitative “certification ” that they are single photons. Some of the single-photon certifications can be significantly better than what is possible with conventional downconversion sources (using a unified trigger detector region), as well as being better than faint laser sources. With such a source of more tightly certified single photons, it should be possible to improve the maximum secure bit rate possible over a quantum cryptographic link. We present an analysis of the relative merits of this method over the conventional arrangement.

Efficient sources of indistinguishable single photons are a key resource for various applications in fields like quantum sensing, quantum metrology and quantum information processing. In this contribution we report on single photon generation based on III-V semiconductor quantum dots (QDs). To increase the emission efficiency of single photons, it is essential to tailor the radiative properties of the quantum dot emitters by engineering their photonic environment. We present optimized single photon emitters being based on both micropillar and photonics crystal cavities, for applications in a vertical platform and on-chip in-plane platform, respectively. Electrically driven single photon sources with self assembled semiconductor QDs embedded into GaAs/AlAs micropillar cavities emit on demand net rates of ~35 MHz single photons, thus being well exploitable in quantum key distribution systems. In order to establish also a spatially deterministic fabrication platform, position controlled quantum dots are integrated into p-i-n micropillar cavities and single photon emission of a coupled QD-micropillar diode system is observed. Efficient broadband coupling of single photons into photonic crystal waveguides provides the basis for all on-chip quantum information processing, and an according approach is reported.

We describe the simplest single–photon encoding schemes and introduce the concept of a quantum optical gate. These gates can be used to build up arbitrary entangled states of many initially separate single photons. Experimental realization of such a gate involves the development of nonlinear phase shift elements sensitice at the single quantum level. We report our experimental efforts using linear optical elements and non–classical sources where we are able to demonstrate interference and entanglement of initially separate single–photon pulses.

The integration of a single photon source based on a solid-state emitter with a photonic structure remains challenging and specifically when it comes to be compatible with optical fibres. It is important to do so for quantum technologies where single photon sources constitute building blocks for many technologies. In this work, we demonstrate the integration of a single photon source, made of a colloidal semiconductor nanocrystal, with a photonic structure made of a glass waveguide obtained by the ion-exchange technique, which is a fibre-compatible platform used in telecom photonics. Using surface functionalisation and a secondary waveguide of titanium dioxide, we manage to couple single photons from the nanoemitter to the optical waveguide. We observe the single photon character is preserved and demonstrates a 1.2 Purcell factor. A coupling efficiency over 25% is expected thanks to the titanium dioxide secondary waveguiding layer, compared to around 2% obtained for simply positioning the nanocrystal on top of the waveguide alone. The optical waveguide is then pigtailed to an optical fibre to demonstrate a first proof of principle of an integrated single photon source at room temperature with a fibre-compatible platform made of glass with a coupling efficiency increase of 2.8.

This thesis covers the development and the characterization of a single photon detector based on a superconducting microcalorimeter. The detector development is motivated by the Any Light Particle Search II (ALPS II) experiment at DESY in Hamburg, which searches for weakly interacting sub-eV particles (WISPs). There- fore, a detection of low-fluxes of 1064 nm light is required. The work is divided in three analyses: the characterization of a milli-kelvin (mK) cryostat, the character- ization of superconducting sensors for single photon detection, and the determina- tion of dark count rates concerning 1064 nm signals. Firstly, an adiabatic demagnetization refrigerator (ADR) is characterized, which allows to reach mK-temperatures. During commissioning, the ADR cryostat is op- timized and prepared to stably cool superconducting sensors at 80 mK 25 K. It is found that sensors can be continuously operated for 20 h before recharging the system in < 2 h. Furthermore, the adiabatic system reaches a chance of success of 80 % for a recharge without technical problems. Secondly, superconducting sensors are analyzed. The focus is on microcalori- metric transition-edge sensors (TESs) based on 20 nm Tungsten (W) films fabri- cated by the U.S. National Institute of Standards and Technology (NIST). NIST TESs have a near unity detection e ciency for 1064 nm light (literature value). The energy resolution for 1064 nm signals is measured to be < 8 %. The expo- nential falling time of a photon pulse is 1.5 s. Furthermore, by determining TES parameters, it is found that the linear TES theory describes measured photon pulses well. The TES response is read out by a superconducting quantum interference device (SQUID) fabricated by Physikalisch-Technische Bundesanstalt (PTB). The system bandwidth is measured to be 0.9 MHz. Finally, the operation in the ADR cryostat as well as the ALPS II laboratory is optimized. This setup forms the ALPS TES detector. Thirdly, the background is measured to obtain a dark count rate for 1064 nm signals. The ALPS TES detector is calibrated by a 1064 nm single photon source and methods are developed to analyze signals. In long-term measurements, back- ground events are measured by using di erent optical setups. By operating the TES without an optical link outside mK-environment, intrinsic background components are observed and classified. This results in an intrinsic dark count rate for 1064 nm signals of 1 : 0 10

The generation of non-classical states of light is of fundamental scientific and technological interest. For example, 'squeezed' states enable measurements to be performed at lower noise levels than possible using classical light. Deterministic (or triggered) single-photon sources exhibit non-classical behaviour in that they emit, with a high degree of certainty, just one photon at a user-specified time. (In contrast, a classical source such as an attenuated pulsed laser emits photons according to Poisson statistics.) A deterministic source of single photons could find applications in quantum information processing, quantum cryptography and certain quantum computation problems. Here we realize a controllable source of single photons using optical pumping of a single molecule in a solid. Triggered single photons are produced at a high rate, whereas the probability of simultaneous emission of two photons is nearly zero--a useful property for secure quantum cryptography. Our approach is characterized by simplicity, room temperature operation and improved performance compared to other triggered sources of single photons.

Efficient generation of single photons is one of the key challenges of building photonic quantum technology, such as quantum computers and long-distance quantum networks. Photon source multiplexing—where successful pair generation is heralded by the detection of one of the photons, and its partner is routed to a single mode output—has long been known to offer a concrete solution, with output probability tending toward unity as loss is reduced. Here, we present a temporally multiplexed integrated single photon source based on a silicon waveguide and a low-loss fibre switch and loop architecture, which achieves enhancement of the single photon output probability of 4.5 ± 0.5, while retaining g (2)(0) = 0.01.

Semiconductor quantum dots embedded in optical cavities are promising on-demand sources of single photons. Here, we theoretically study single photon emission from an optically driven two-photon Raman transition between the biexciton and the ground state of a quantum dot. The advantage of this process is that it allows all-optical control of the properties of the emitted single photon with a laser pulse. However, with the presence of other decay channels and excitation-induced quantum interference, on-demand emission of the single Raman photon is generally difficult to achieve. Here we show that laser pulses with non-trivial shapes can be used to maintain excitation conditions for which with increasing pulse intensities the on-demand regime is reached. To provide a realistic picture of the achievable system performance, we include phonon-mediated processes in the theoretical caluclations. While preserving both high photon purity and indistinguishability, we find that although based on a higher-order emission process, for realistic system parameters on-demand Raman photon emission is indeed achievable with suitably tailored laser pulses.

Quantum Key Distribution (QKD) is important for a variety of quantum technologies. Here we demonstrate a free-space room temperature, discreet-variable QKD system using a bright Single photon sources (SPS) in hexagonal Boron Nitride (hBN).

Based on the quantum dot-photon molecular coupling system, we proposed an efficient and stable single photon source. The system uses photon molecules formed by the coupling of two optical microcavities A and B, one of which contains a quantum dot. The excitation laser act on the quantum dot in cavity A, and through the interaction between the light field in cavity A and cavity B, single photon is generated in cavity B and output extraction is performed therein. The system maintains good sub-Poisson characteristics over a wide range of dot-cavity coupling strength variation (0.25κ<;g<;κ) and at low cavity tunneling strength (J≥0.5κ) as well. It also has excellent robustness and is easy to construct. Under the optimal experimental parameters that can be realized, the zero-delay second-order correlation function g <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> (0) of the system can be as low as 10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">-5</sup> with a relatively large intra cavity photon number. We theoretically explains the reason why the system produces sub-Poisson light, and analyzed the impact of system parameters change. Meanwhile, the system spatially separates the output light from the excitation light, making it easy to extract single photons, and has potential application value for easier integration. The model proposed in this paper will bring important guiding value to the efficient and integrated single photon sources in future quantum information processing.

Single photon sources, which are compatible with quantum memories, are important components of quantum networks. In this article, we show optical investigations on isolated GaAs/Al0.25Ga0.75As quantum dots grown via droplet epitaxy, which emit single photons on resonance with the Rb-87-D2 line (780 nm). Under continuous wave resonant excitation conditions, we observe bright, clean, and narrowband resonance fluorescence emission from such a droplet quantum dot. Furthermore, the second-order correlation measurement clearly demonstrates the single photon emission from this resonantly driven transition. Spectrally resolved resonance fluorescence of a similar quantum dot yields a linewidth as narrow as 660 MHz (2.7 μeV), which corresponds to a coherence time of 0.482 ns. The observed linewidth is the smallest reported so far for strain free GaAs quantum dots grown via the droplet method. We believe that this single photon source can be a prime candidate for applications in optical quantum networks.

The characterization of the single photon response of the Hamamatsu R7600 multi-anode photomultiplier tube (MaPMT) is presented, in view of a possible application in Ring Imaging Cherenkov (RICH) detectors and high rate single photon counting applications in general. For most of the measurements the main source of single photons was a commercial blue LED biased with a small current of a few nA. The spectra obtained with this source match those obtained with Cherenkov light from a PbF2 crystal illuminated with a 22Na gamma source, confirming that the test signals are single photons. Dark current and cross-talk were measured at the single photoelectron level. The single photon response of the PMT was also studied as a function of the bias ratio between dynodes. The sensitivity to magnetic field up to 30 G and the effectiveness of three magnetic shields with different geometries were evaluated. Gain loss due to aging was also studied up to 2000 hours of operation at high counting rate.

A high-fidelity source of identical single photons is essential for numerous\nquantum technologies such as quantum repeaters and optical quantum information\nprocessing. Hallmarks thereof are a near-unity single-photon purity, near-unity\nindistinguishability of consecutively emitted photons, and high brightness\nthrough a near-unity number of photons per time bin. In order to embed such\nsources in quantum networks, optical fiber integration is essential but\ncomplicated by cryogenic compatability and noise. Here we demonstrate a\nresonantly pumped, quantum dot (QD) based, transmission operated, single-mode\nfiber coupled single photon source with a purity of 97%, indistinguishability\nof 90%, and a brightness of 17%. This is achieved by deploying a unique\nmicropillar cavity design in a closed-cycle cryostat, which is operated using a\nthrough-fiber cross-polarization technique to remove the pump laser light from\nthe resonantly scattered single photons. These results pave the way for fully\nfiber integrated photonic quantum networks, as our technology is equally\napplicable for cavity-QED based photonic quantum gates.\n

A key ingredient for quantum photonic technologies is an on-demand source of indistinguishable single photons. State-of-the-art indistinguishable single-photon sources typically employ resonant excitation pulses with fixed repetition rates, creating a string of single photons with predetermined arrival times. However, in future applications, an independent electronic signal from a larger quantum circuit or network will trigger the generation of an indistinguishable photon. Further, operating the photon source up to the limit imposed by its lifetime is desirable. Here, we report on the application of a true on-demand approach in which we can electronically trigger the precise arrival time of a single photon as well as control the excitation pulse duration based on resonance fluorescence from a single InAs/GaAs quantum dot. We investigate in detail the effect of the finite duration of an excitation $\pi$ pulse on the degree of photon antibunching. Finally, we demonstrate that highly indistinguishable single photons can be generated using this on-demand approach, enabling maximum flexibility for future applications.