- Research Article
- 10.1287/isre.1120.0442
About Our Authors
- Sep 01, 2012
- Information Systems Research
About Our Authors
During complex manufacturing process, various manufacturing information systems and management information systems are often existing as heterogeneous systems, and manufacturing data is distributed everywhere across the whole value chain of the enterprises. One of the most valuable targets in the integration of these manufacturing information systems is the sharing of enterprise resources which are described in different formats in different information systems. In this paper, meta-resource model is extended using workflow to combine enterprise resources together with business process during manufacturing. Then, an effective method of data integration is proposed based on the meta-resource model. In the proposed method, heterogeneous data is encapsulated in unified format of resource and binding with workflow so that data resources could be accessed according to the business process of manufacturing. Finally, case study shows that the resource-based data integration approach is more robot and flexible than traditional data integration method, especial under the environment of complex manufacturing.
About Our Authors
About Our Authors
SISTEM INFORMASI SUMBER DAYA MANUSIA UNIVERSITAS ISLAM KALIMANTAN MUHAMMAD ARSYAD AL BANJARI (WEBSITE: https://sipeg.uniska-bjm.ac.id)
The existence of tertiary institutions as one of the spearheads of improving human resources in the field of education is an indisputable fact. Higher education as a very complex institution requires benchmarks that can be used as a reference in assessing success in its management. One of the main benchmarks that can be used is the existence of an information system. Higher Education Management Information Systems In the Field of Higher Education Data Collection, colleges that are managed with a good information system will be able to control the management of the institution well. Management information system, which is often known by the acronym MIS, is the application of information systems within the organization to provide the information needed by all levels of management. Management Information System (MIS) can be defined as a collection of interaction information systems that are responsible for collecting and managing data to provide useful information for all levels of planning and control activities. Some of the supporters of MIS, the role of Information Technology (IT) as part of an Information System (SI) has changed dramatically. Currently, IT is not only positioned as a tool for organizational activities but has become an organizational strategy to achieve goals. A higher education institution is an academic organization that uses information technology in shaping various business processes in it. This form of organization has its own distinctive character, so that the form of the required information system must have its own character. The Islamic University of Kalimantan (UNISKA) Muhammad Arsyad Al Banjari is the oldest and largest private university in South Kalimantan, founded by the UNISKA foundation based on Bachtiar's notarial deed No. 6 dated July 7, 1981. Currently UNISKA MAB has 9, nine faculties, 20 undergraduate study programs, and 4 PACASARJANA Programs or Masters Study Programs. In this study, research procedures are shown to obtain the current management information system for higher education and the problems that arise in this collaborative higher education data collection activity. According to Sekaran (2000) there are 3 types of research, namely: 1) exploratory research, namely research that aims to seek clarity on a problem; 2) descriptive research, research that aims to find a description of an object; and 3) verificative research (explanatory research), research that aims to answer the problem formulation. This study is a descriptive-qualitative research (descriptive-caulitative research), because it wants to know and at the same time describe the objective conditions of the data collection mechanism carried out by UNISKA MAB and the problems that arise in the data collection collaboration. The approach used is a qualitative approach. Qualitative research starts from the phenomenological paradigm whose objectivity is built from the formulation of certain situations lived by certain individuals or social groups, and is relevant to the objectives of the research. A qualitative approach is used to get an overview of the problems faced by UNISKA MAB in order to improve and empower the higher education management information system. With the following conclusions: 1. Not all lecturers understand and use SIPEG so that it becomes an obstacle to the quality and quantity of Uniska's HR data collection and many lecturers do not take care of Jafung only as teaching staff, 2. Lecturers use Manual and Sipeg Uniska MAB data and 3. Support implementation Uniska HR Management Information System exists but it is not yet optimal because to maximize the need for good IT equipment and campus bandwidth, something good requires large funds.
Read moreGovernance Through Electronic-based Information System by Papua Provincial Government
This research is about regional development efforts through governance with electronic-based information systems in Papua Province, namely Papua One Data Integration (PAITUA), Papua Spatial Management Information System (SIMTARU), Information System for Official Travel Orders (SPPD) Papua Provincial Government and Presence Information System and TPP. Papua Innovation One Data Integration (PAITUA) is a systematic and structured regional governance policy to produce data that is accurate, up-to-date, integrated, accountable, easy to access, can be shared between regional apparatuses, central agencies and other agencies through compliance with data standards , metadata, data interoperability and use of reference code and master data. Papua Spatial Management Information System Innovation (SIMTARU) is an open source application that is part of the Spatial-Based Information Management System (SMIS). The combination of modern cartographic technology with participatory methods in the form of data layers and permits or maps in several categories is used to monitor all activities related to spatial planning in Papua Province. Innovation of Information System for Service Travel Orders (SPPD) for the Government of Papua Province is a web-based information system that is equipped with a set of computers that can be accessed into a data communication network where the server is located at the Papua Communication and Informatics Office and can be accessed online.This study uses a qualitative approach research method. As for data collection with literature review techniques. Literature review or literature review is a systematic examination of critical scientific literature in analyzing, evaluating, and synthesizing research findings, theory, and practice.Literature reviewprovide an overview of the development of a particular topic.The result of the Papua One Data Integration (PAITUA) innovation is that data and information are available that are complete, accurate, up-to-date, integrated, accountable and easily accessible and shared between Regional Work Units and Central Agencies as a basis for planning, implementing, evaluating and controlling development area. The innovation of the Papua Spatial Management Information System (SIMTARU) is the availability of a Web-GIS-based spatial information system that provides information data and produces a decision support system in implementing spatial planning. The result of the innovation of the Official Travel Order Information System (SPPD) for the Provincial Government of Papua is the availability of a Web-based Electronic Business Travel Order Information System (e-SPPD) which is equipped with a set of computers that can be accessed into a data communication network with servers at the Papua Kominfo Service and can be accessed by online. The result of the innovation of the Presence Information System and TPP is that digital attendance is available which is connected to the Additional Employee Income (TPP) application. The aim is to make TPP payments more focused and refer to employee attendance and apply discipline to entering and leaving the office on time for the state civil apparatus (ASN). The result of the innovation of the Presence Information System and TPP is that digital attendance is available which is connected to the Additional Employee Income (TPP) application. The aim is to make TPP payments more focused and refer to employee attendance and apply discipline to entering and leaving the office on time for the state civil apparatus (ASN). The result of the innovation of the Presence Information System and TPP is that digital attendance is available which is connected to the Additional Employee Income (TPP) application. The aim is to make TPP payments more focused and refer to employee attendance and apply discipline to entering and leaving the office on time for the state civil apparatus (ASN).
Read moreImplementation of RESTful Web Service as Employee Data Integration on Oracle Database Technology and MariaDB
Computer computer-based information systems at an institution are often built in stages and separately. Data integration between subsystems is not well connected. The results in differences in the data structures or the number of records between one subsystem and another so that the data presented is not aligned. This study aims to design and implement a RESTful Web Service so that other information subsystems can use employee data from the Management Information System. The four stages in this research are observing the information system currently running, analyzing the data integration needs, designing and coding the RESTful Web Service API, implementing and testing the response time.
Read moreAligning Business Process Quality and Information System Quality
Business processes and information systems mutually affect each other in non-trivial ways. Frequently, the business process design and the information system design are not well aligned. This means that business processes are designed without taking the information system impact into account, and vice versa. Missing alignment at design time often results in quality problems at runtime, such as large response times of information systems, large process execution times, overloaded information systems or interrupted processes. Aligning business process quality and information system quality at design time requires to \nsolve the following problems (P). Business process quality and information system quality have to be characterized. P1: In contrast to information system quality, which is specified in the ISO/IEC 9126 standard, for example, there is no common and comprehensive understanding of business process quality. P2: Beyond that, current business process \nmodeling notations do not aim to represent quality aspects. The impact of a business process on the quality of an information system, and vice versa, is unknown at design \ntime. P3: The mutual impact between business processes and information systems must be predicted at design time. \nIn this thesis, the Business Process Quality Reference-Model (BPQRM), a quality model for business processes, is introduced. The model allows for a comprehensive characterization of business process quality (P1). The BPQRM is applied successfully in a case study to \nidentify potential for process quality improvement in practice. Based on the BPQRM an existing process modeling notation is extended by model elements to represent quality \naspects (P2). Simulation is a powerful means to predict the impact of a business process on the quality of an information system, and vice versa, at design time. This thesis proposes two simulation approaches to predict the mutual impact between business processes and information systems, in terms of performance (P3). The approach Business \nIT Impact Simulation (BIIS) defines interfaces between the business process simulation and the information system simulation. Performance-relevant information is exchanged \nvia the interfaces between both simulations. Using business process simulation and information system simulation in isolation, workload burstiness is not adequately reflected. \nThis is especially true for occasional, volatile peak loads. Workload burstiness can significantly affect the performance of business processes and information systems. The approach Integrated Business IT Impact Simulation (IntBIIS) for the integration of business processes and information systems in a single simulation allows for reflecting workload burstiness correctly. The simulation approaches support the comparison of design alternatives and the verification of a certain design against requirements. A case study confirms the feasibility in practice and the acceptance from practitioners’ point of \nview.
Read moreA Study of Value Addition by Information Systems to a Service Providing Business at the Meteorological Services Department in Zimbabwe
Many companies are using only a portion of what is needed in terms of Information Technologies (IT) and this has caused the researcher to study how best MSD can effectively utilize Management Information Systems (MIS). The objective that directed the study was to investigate value addition by information systems to a service providing business with specific reference to the weather station in Zimbabwe (Meteorological Services Department). Knowing the value added by MIS to one’s business and working environment is key to cope with the ever increasing challenges such as the volume of information resources, nature and quality of information, user needs and expectations, information and communication technology competencies and infrastructure, inflated cost of information resources and staffing needs. The researcher studied how information systems add value to the daily business of Meteorological Services Department (MSD) in the following areas of the organisation processes: products, quality, management, problem solving and decision of the organisation. The study on value addition by management information systems will assist in the improvement of the MSD in Zimbabwe. The study used a multistage sampling process for drawing sample from the target population. Secondary and primary data collection methods were used for data collection purposes. The source for primary data was questionnaire. Five different types of Management Information Systems that add value to the MSD were identified; Management Information Systems, Office Automation Systems, Executive Support Systems, Expert Systems, Decision Support System and Transaction Processing System. From the findings it was concluded that management information systems add value by allowing valid decisions which provide accurate and up-to-date information and performing analytic functions. This study demonstrated the importance of information systems in an organisation and outlined the fundamental roles of Information Systems (IS) which are to support business processes and operation, support decision making by employees and managers and support strategies for competitive advantage.
Read moreManufacturing Information Systems for Forestry Companies Based on Integrated Modular Approach «Many Companies—One Tool»
The paper describes a modular methodology for the design of manufacturing information systems (MIS) on the example of forestry industry. The need to develop such methodology is justified by the current demand of forestry companies to increase the return on investment in information systems implementation. The proposed modular design methodology makes it possible to design and implement MIS that takes into account the specifics of a forestry enterprise and is less expensive compared to competing solutions. The advantage becomes possible due to the use of an integrated modular approach to a wide range of forestry companies “many companies—one tool” based on universal integrated platform solutions. This approach uses a matrix relation of a specific forestry enterprise with a universal technological process. The novelty of the proposed methodology is the automation of developing the mathematical model of a forestry enterprise by choosing unified procedures from the available set and tuning the parameters to account for the specifics of a particular enterprise. This allows using a unified set of functional diagrams, which reduces the time and cost of designing and modifying MIS based on them. The consistent approach to selecting the unified procedures leads to obtaining the mathematical model of a forestry enterprise, which becomes the core of its MIS. Application of this methodology makes it possible to design, implement and scale MIS for forestry companies faster and cheaper than using traditional approaches.KeywordsManufacturing information systemsDesign methodologyForestry companiesIntegrated modular approachCosts reduction
Read moreResearch on equipment data management based on NXD
Equipment information needs to be shared and exchanged in the heterogeneous systems. The traditional database did not adapt the new requirement. How to effectively manage the massive XML data is a problem to be solved urgently. The characteristic and advantage of data integration technology based on Native XML Database (NXD) were analyzed. A data management system of the equipment information based on NXD technology was proposed, and the system functions, architecture and key technologies were studied. In paper three primary technologies were discussed: data module, information storage and information interaction. After these research works, heterogeneous data is retrieved more quickly; efficiency of information management is enhanced and the interoperation of information is assured. And at the same time, the most important things are data integration and sharing problems have been effectively solved.
Read moreData Fusion for Adaptive Control in Manufacturing: Impact on Engineering Information Models
This paper addresses the impact of data fusion on engineering and manufacturing information systems. Data fusion is the integration and analysis of data from multiple sensors to develop a more accurate understanding of a situation and determine how to respond to it. (Sensor fusion, a related term, has a somewhat different, more implementation oriented focus. The difference between these two concepts is addressed specifically in Section 1.) Although data fusion can be applied in many situations, this paper focuses on its application to manufacturing and how it changes some of the more traditional, less adaptive information models that support the design and manufacturing functions. Data fusion requires changes, primarily extensions, to these traditional information models. Engineering models normally address geometry, features, and performance characteristics of a part, while manufacturing models address machine tool characteristics and how they interact with the workpiece and operations scheduling. For data fusion and adaptive control, these models must include the dynamic behavior and interactions between the workpiece and the machine tool. In addition, these models must specify how these dynamic behaviors can be seen and interpreted by various types of sensors (e.g. temperature, pressure, and vibration). On a broader level it must also consider how the machine tools and robots interact within a work cell or production line. The paper consists of four parts. The first section explains what data fusion is and its impact on manufacturing. The second section describes what an information system architecture is and explains the natural language-based information modeling methodology used by this research project. The third section identifies the major design and manufacturing functions, reviews the information models required to support them, and then shows how these models must be extended to support data fusion. The fourth section discusses the future directions of this work.
Read moreMulticriteria group decision making for selecting human resources management information systems projects
The application of information systems (IS) for supporting human resources management has become increasingly important for organizations in improving their competitiveness. The selection of the most suitable human resources management IS project, however, is complex and challenging due to the involvement of multiple decision makers, the multi-dimensional nature of the selection process and the presence of vagueness and imprecision inherent in the human decision making process. To adequately deal with this problem, this paper presents a multicriteria group decision making approach for selecting human resources management IS projects under uncertainty. Intuitionistic fuzzy numbers are used for effectively modelling the vagueness and imprecision of the decision making process. A multicriteria group decision making approach is developed for calculating an overall performance index for every human resources management IS project alternative across all criteria. A human resources management IS project selection problem is presented to demonstrate the effectiveness of the approach.
Read moreManagement of information systems, implementation and their importance in Albanian enterprises
Management information system collects and processes data (information) and provides it to managers at all levels who use it for decision making, planning, program implementation, and control. In addition to the global studies of management information system, this paper will analyze similar cases in Albanian enterprises. Albanian enterprises strongly need management information systems and the facilities that they bring to their management ensuring a better functioning and higher performance of different enterprise processes. In this paper was taken the case study of the Microsoft Dynamics NAV system, the implementation in “Infosoft Systems” enterprise in Albania and the impact of NAV system in some of the enterprise departments. Implementation phase of management information system is one of the most important stages which starts with the organization of the information systems management department and ends with the procurement of the relevant software. To get more information we used a questionnaire which was designed and sent to some enterprises in Albania. The purpose of this questionnaire was to learn how many of them use management information systems, what type of information system they use and the advantages or benefits that the implementation of information systems brings to enterprises in Albania. As a conclusion, management information systems have contributed to enterprises to put in place better functionality, which leads to increased enterprise performance, increased profits, simplified work processes in different departments.
Read moreResource and Grade Control Model Updating for Underground Mining Production Settings
A key requirement for the mining industry is the characterization of the spatial distribution of geometallurgical properties of the ore and waste in a mineral deposit. Due to geological uncertainty, resource models are crude representations of reality, and their value for forecasting is limited. Information collected during the production process is therefore of high value in the mining production chain. Models for mine planning are usually based on exploration information from an initial phase of the mineral extraction process. The integration of data with different supports into the resource or grade control model allows for continuous updating and is able to provide estimates that are more accurate locally. In this paper, an updating algorithm is presented that integrates two types of sensor information: sensors characterizing the exposed mine face, and sensors installed in the conveyor belt. The impact of the updating algorithm is analysed through a case study based on information collected from Reiche-Zeche, a silver–lead–zinc underground mine in Freiberg, Germany. The algorithm is implemented for several scenarios of a grade control model. Each scenario represents a different level of conditioning information prior to extraction: no conditioning information, conditioning information at the periphery of the mining panel, and conditioning information at the periphery and from boreholes intersecting the mining panel. Analysis is performed to compare the improvement obtained by updating for the different scenarios. It becomes obvious that the level of conditioning information before mining does not influence the updating performance after two or three updating steps. The learning effect of the updating algorithm kicks in very quickly and overwrites the conditioning information.
Read moreThe Critical Improvement of Hospital Claim Fulfillment towards Public Insurance, using BPR and MIS Approach
Public insurance claim management in hospitals faces several problems managing claims hospital costs. This study aims to design improvement in the claim fulfillment process managed by the hospital using the Business Process Reengineering (BPR) and Management Information Systems (MIS) to improve service process time (efficiency) in submitting claim files and diminish claim file returns. Business process reengineering divided into two stages; modeling and simulating current business processes and proposed business processes. This study resulted in four scenarios to improve the public insurance claim process with different processing times in each scenario. The best scenario designed with entity-relationship diagram (ERD) and data flow diagram (DFD). The best combination of proposed scenarios uses Electronic Medical Record (EMR), Hospital Information Systems (HIS), and improved fulfillment claim systems at Public Insurance Institution. This study result average cycle business process time reduced from 28 days to 14 days with an increase in efficiency of 78,73%.
Read moreIntegrating business process simulation and information system simulation for performance prediction
Business process (BP) designs and enterprise information system (IS) designs are often not well aligned. Missing alignment may result in performance problems at run-time, such as large process execution time or overloaded IS resources. The complex interrelations between BPs and ISs are not adequately understood and considered in development so far. Simulation is a promising approach to predict performance of both BP and IS designs. Based on prediction results, design alternatives can be compared and verified against requirements. Thus, BP and IS designs can be aligned to improve performance. In current simulation approaches, BP simulation and IS simulation are not adequately integrated. This results in limited prediction accuracy due to neglected interrelations between the BP and the IS in simulation. In this paper, we present the novel approach Integrated Business IT Impact Simulation (IntBIIS) to adequately reflect the mutual impact between BPs and ISs in simulation. Three types of mutual impact between BPs and ISs in terms of performance are specified. We discuss several solution alternatives to predict the impact of a BP on the performance of ISs and vice versa. It is argued that an integrated simulation of BPs and ISs is best suited to reflect their interrelations. We propose novel concepts for continuous modeling and integrated simulation. IntBIIS is implemented by extending the Palladio tool chain with BP simulation concepts. In a real-life case study with a BP and IS from practice, we validate the feasibility of IntBIIS and discuss the practicability of the corresponding tool support.
Read moreA contingent cost analysis of alternative manufacturing information systems
A contingent cost analysis of alternative manufacturing information systems