An efficient adaptive feedback cancellation for hearing aids

In feedback cancellation in hearing aids, an adaptive filter is used to model the feedback path. The output of the adaptive filter is subtracted from the microphone signal to cancel the acoustic and mechanical feedback picked up by the microphone, thus allowing more gain in the hearing aid. In general, the feedback cancellation filter adapts on the hearing-aid input signal, and signal cancellation and coloration artifacts can occur for a narrowband input. The goal in feedback cancellation is to design an algorithm that is computationally efficient, provides 10 dB or more of additional amplifier headroom, and is free from processing artifacts.This chapter begins with a steady-state analysis of the effects of acoustic feedback on the hearing-aid response. This analysis illustrates the factors that can affect the accuracy of the adaptive filter and the filter convergence for systems adapting with or without a probe signal. The characteristics of the feedback path being modeled are then described. An additional concern in designing signal processing for a hearing aid are the processing constraints imposed by a low-power portable device, and these concerns are discussed next. Two forms of constrained adaptation are then derived, and simulation results are used to give a comparison of the constrained adaptation with the conventional unconstrained approach for a system adapting without a probe signal. Further improvements in feedback cancellation performance, particularly a reduction in audible processing artifacts, can be achieved by using the filtered-X algorithm, and this approach is described next.The performance of feedback cancellation is ultimately limited by the characteristics of the room in which the listener is located since the room reflections form part of the feedback path. The chapter concludes with a study of the feedback path in a room along with the feedback cancellation performance for an 8-, 16-, or 32-tap adaptive FIR filter in series with a five-pole nonadaptive filter, and the performance limitations imposed by the room reverberation are discussed.KeywordsImpulse ResponseFeedback PathAdaptive FeedbackAcoustic FeedbackRoom ReverberationThese keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

An improved block adaptive system for effective feedback cancellation in hearing aids

In this contribution we describe an adaptive feed-back cancellation (FBC) system realized with 48 sub-band filters. As core procedure we propose a combination of two decorrelation measures to stabilize and optimally control the adaptation. We show that especially this combination of pre-whitening and frequency shift allows realizing three major steps for a fast and reliable FBC in real hearing aids. First, the adaptation bias is removed. Second, an optimal adaptation control can be realized, and third, we show that a differentiation between feedback and tonal input signals is possible. The latter can be used for an additional improvement of the adaptation control.

In feedback cancellation in hearing aids, an adaptive filter is used to model the feedback path. The output of the adaptive filter is subtracted from the microphone signal to cancel the acoustic and mechanical feedback picked up by the microphone, thus allowing more gain in the hearing aid. In general, the feedback-cancellation filter adapts on the hearing-aid input signal, and signal cancellation and coloration artifacts can occur for a narrow-band input. In this paper, two procedures for LMS adaptation with a constraint on the magnitude of the adaptive weight vector are derived. The constraints greatly reduce the probability that the adaptive filter will cancel a narrow-band input. Simulation results are used to demonstrate the efficacy of the constrained adaptation.

Adaptive feedback cancellation in hearing aids

Affine projection algorithms (APA) have been widely employed for acoustic echo cancellation (AEC) since they provide a natural trade-off between convergence speed and computational complexity. However, their application in Acoustic Feedback Cancellation (AFC) in hearing aids so far has been limited due to lack of performance improvement in one microphone settings. A two microphone technique was recently proposed to provide an improved cancellation for a larger class of input signals. This paper proposes to use APA in the two microphone closed-loop feedback cancellation. It is shown that APA has significantly improved the misalignment and maximum stable gain of the system. Moreover, a new variable Gaussian step-size control (VGSS) for APA is also proposed. The simulation results indicate an improvement in convergence speed of the proposed algorithms as compared to previously suggested methods.

The feedback cancellation scheme in hearing aids mainly employs Filtered-XLMS (FXLMS) algorithm However, the conventional FXLMS algorithm doesnot provide satisfactory performance in the presence of outliers acquired by the microphone. In this paper, Filtered-X Wilcoxon LMS (FXWLMS) and Filtered-X least mean log square (FXLMLS) are being introduced as two robust learning algorithms for effective feedback cancellation in the presence of outliers. The simulation studies demonstrate the superior feedback cancellation performance of FXLMLS and FXWLMS over FXLMS in the presence of outliers.

The adaptive feedback canceller (AFC) based on the least mean square (LMS) or normalized LMS (NLMS) algorithm shows poor convergence for sparse impulse response, since they do not consider the characteristics of the impulse response. The acoustic feedback path of the hearing aid exhibits sparse characteristics consisting of few active coefficients and many non active (near to zero) coefficient values. This paper proposes an improved gradient controlled improved proportionate NLMS (IGC-IPNLMS) algorithm for cancelling the feedback phenomenon in hearing aids. The IGC-IPNLMS algorithm employs a variable convergence factor, an estimate of the gradient vector for allocating step size, the controlling parameter of the IGC-IPNLMS algorithm is also updated in each iteration based on the sparseness measure. Further, the reduction in computational complexity is achieved by using sparse partial update method along with the IGC-IPNLMS algorithm (SIGC-IPNLMS) for feedback cancellation. The simulation results show the superior performance of the proposed method for white noise and speech segment as input.

Approximated affine projection algorithm for feedback cancellation in hearing aids

A new subband feedback cancellation scheme is proposed, capable of providing additional stable gain without introducing audible artifacts. The subband feedback cancellation scheme employs a cascade of two narrow-band filters Ai(Z)and Bi(Z)ng with a fixed delay, instead of a single filter Wi(Z)and a delay to represent the feedback path in each subband. The first filter, Ai(Z), is called the training filter, and models the static portion of the feedback path in ith subband, including microphone, receiver, ear canal resonance, and other relatively static parameters. The training filter can be implemented as a FIR filter or as an IIR filter. The second filter, B?I?(Z), is called a tracking filter and is typically implemented as a FIR filter with fewer taps than the training filter. This second filter tracks the variations of the feedback path in the i?th? subband caused by jaw movement or objects close to the ears of the user.

The use of an adaptive feedback canceler (AFC) for howling suppression in hearing aids seems very attractive since it is not only unaffected by the changes in the operating environment, but it also limits signal degradation due to the feedback signal. This, however, requires a reference signal which is correlated with the feedback signal but not with the input signal. In hearing aids, such a signal is hard to obtain. The output signal could be used as reference if its correlation with the input signal could sufficiently be removed. If the reference signal is correlated with the input signal, the input signal will also be canceled by the AFC. Here, the use of a frequency compressor as a decorrelator is proposed. The performance of this system is then investigated via digital simulation. Results indicated that with the use of the proposed system and the proper choice of system parameters, an increase of about 18 dB in the howling margin could be achieved with minimal deterioration in output signal quality.

Low-rank enhanced Hammerstein-spline adaptive filter for sparsity-aware nonlinear feedback cancellation in hearing aids

Coherence is a frequency-domain measure of linear dependence between input and output of a system, e.g. a hearing aid, and describes the cumulative effect of different forms of signal corruption, e.g. noise and non-linear distortion. From the coherence function, a general frequency-dependent signal-to-noise ratio can be derived. In this investigation, the applicability of this measuring technique is demonstrated in connection with non-linear distortion in hearing aids. The influence of hearing aid gain and automatic gain control is illustrated, with speech-shaped noise as input signal. For the three hearing aids tested. The gain setting influences the signal-to-noise ratio heavily due to non-linear distortion, especially near maximum gain. The introduction of automatic gain control reduces the effect of non-linear distortion somewhat at high gain settings.

Acoustic feedback arises from the leakage of sound from the loudspeaker back to the microphone and is a common problem in hearing aids and public address systems. One popular solution to this problem is adaptive feedback cancellation (AFC) which utilizes an adaptive filter (AF) to estimate and subsequently subtract the feedback component from the microphone. Due to the closed-loop system the loudspeaker signal and the incoming signal exhibit a high correlation. However, model-based and more recently learning-based AF methods typically neglect this correlation in their derivation, leading to sub-optimal performance in closed-loop scenarios. In this paper, we propose Neural-AFC, a recurrent neural network (RNN) designed for AFC step-size control optimization, that addresses this problem by including not only the adaptive filter but also the acoustic feedback path and the system gain in the recurrence model. Our experiment results show that when trained within this closed-loop model, Neural-AFC improves the steady-state performance and (re)convergence rate compared to conventional and open-loop RNN-based AF in both hearing aid and public address system applications.

A input signal for a hearing device signal processing unit is generated with the aid of an electro-acoustic converter. An output signal is generated by applying signal amplification. The signal amplification is adapted by determining a reference level of the input signal using statistical calculation methods. A minimum input signal level is determined by subtracting a predefined difference value from the reference level of the input signal. An amplification function is applied to the input signal when the signal level is less than the minimum input signal level. This amplification function is different from an amplification function applied when the signal level is greater than the minimum input signal level.