An Elastic Task Scheduling Scheme on Coarse-Grained Reconfigurable Architectures

This paper presents a method to time share the Processing Elements (PEs) of Runtime Coarse Grain Reconfigurable Architectures (CGRA) among multiple processes being executed concurrently onto the same CGRA. Runtime CGRA architectures time-multiplex the data path, creating a set of contexts for each state. These contexts configure the PEs and the routing resources of the CGRA and are typically loaded every clock cycle. The target architecture in this work is a commercial CGRA IP which is embedded as an IP into complex SoCs. Our proposed method analyzes the PE utilization in each context for multi-process systems running concurrently onto the same CGRA and time shares unused PEs assigned to one process with the other processes running in parallel. Our method reduces the total PE usage and hence the size of the CGRA IP and therefore the cost of the SoC. Results show that our method is extremely efficient and can reduce the PE utilization by up to 20% and on average by 14% and is only 2% worse than the optimal solution, while being much faster.

Coarse Grained Reconfigurable Architectures (CGRAs) are emerging as enabling platforms to meet the high performance demanded by modern applications. Commonly, CGRAs are composed of a computation layer (that performs computations) and a memory layer (that provides data and config ware to the computation layer). Tempted by higher platform utilization and reliability, recently proposed CGRA soffer dynamic application remapping (for the computation layer). Distributed scratch pad (compiler programmed) memories offer high data rates, predictability and low the power consumption (compared to caches). Therefore, the distributed scratchpad memories are emerging as preferred implementation alternative for the memory layer in recent CGRAs. However, the scratchpad memories are programmed at compile time, and do not support dynamic application remapping. The existing solutions that allow dynamic application remapping either rely on fat binaries (that significantly enhance configuration memory requirements) or consider a centralized memory. To extract the benefits of both runtime remapping and distributed scratchpad memories, we present a design framework called DyMeP. DyMeP relies on late binding and provides the architectural support to dynamically remap data in CGRAs. Compared to the state of the art, the proposed technique reduces the configuration memory requirements (needed by fat binary solutions) and supports distributed shared scratchpad memory. Synthesis/Simulation results reveal that DyMeP promises a significant (up to 60%) reduction in config ware size at the cost of negligible additional overheads (less then 1%).

As computation migrates to the edge, energy efficiency is becoming even more critical in the design of electronic devices. Therefore, new applications for the Internet of Things pose a challenge for designers to find the optimal balance between performance and energy consumption. While Coarse Grained Reconfigurable Architectures (CGRA) have been an alternative to provide the required acceleration, they are far from being the most energy-efficient, since their functional units may be underutilized by some applications. In this work, we introduce a novel approach to handle these CGRA resources, which leverages the variable usage of functional units due to the application program phases. By using our new approach and performing power-gating of under-utilized parts of the CGRA, we demonstrate that it is possible to achieve reductions of up to 52.3% in power dissipation and 75% in energy consumption.

Coarse Grained Reconfigurable Architectures (CGRAs) are emerging as enabling platforms to meet the high performance demanded by modern applications (e.g. 4G, CDMA, etc.). Recently proposed CGRAs offer runtime parallelism to reduce energy consumption (by lowering voltage/frequency). To implement the runtime parallelism, CGRAs commonly store multiple compile-time generated implementations of an application (with different degree of parallelism) and select the optimal version at runtime. However, the compile-time binding incurs excessive configuration memory overheads and/or is unable to parallelize an application even when sufficient resources are available. As a solution to this problem, we propose Transformation based dynamic Parallelism (TransPar). TransPar stores only a single implementation and applies a series for transformations to generate the bitstream for the parallel version. In addition, it also allows to displace and/or rotate an application to parallelize in resource constrained scenarios. By storing only a single implementation, TransPar offers significant reductions in configuration memory requirements (up to 73% for the tested applications), compared to state of the art compaction techniques. Simulation and synthesis results, using real applications, reveal that the additional flexibility allows up to 33% energy reduction compared to static memory based parallelism techniques. Gate level analysis reveals that TransPar incurs negligible silicon (0.2% of the platform) and timing (6 additional cycles per application) penalty.

Emerging communication technologies, such as 5G and beyond, have introduced diverse requirements that demand high performance and energy efficiency at all levels. Furthermore, the real-time requirements of different services vary significantly — increasing the baseband processor design complexity and demand for flexible hardware platforms. This paper identifies the key characteristics of hardware platforms for baseband processing and describes the existing processing limitations in traditional architectures. In this paper, Coarse-Grained Reconfigurable Architecture (CGRA) is examined as a prospective hardware platform and its characteristic features are highlighted as compared to traditionally employed architectures that make it a suitable candidate for incorporation as a domain-specific accelerator in baseband processing applications. We survey various CGRAs from the last two decades (2004-2023) and analyze their distinct architectural features which can serve as a reference while designing CGRAs for baseband processing applications. Moreover, we investigate the existing challenges toward developing CGRAs for baseband processing and explore their potential solutions. We also provide an overview of the emerging research directions for CGRA and how they can contribute toward the development of advanced baseband processors. Lastly, we highlight a conceptual RISC-V+CGRA framework that can serve as a potential direction toward integrating CGRA in future baseband processing systems.

Coarse-grained reconfigurable architectures (CGRAs) are gaining increasing attention as domain-specific accelerators due to their high flexibility and energy efficiency. These architectures offer a compelling solution for applications that require custom hardware performance while retaining a degree of programmability. However, the design space of CGRAs is inherently vast and complex, presenting significant challenges for architects to explore design choices efficiently and systematically. Existing design space exploration (DSE) methodologies for CGRAs are often time-demanding and struggle to deliver optimal solutions when confronted with high-dimensional and multi-objective design space. Therefore, we consider constructing a CGRA parameter tuning framework called MoDAF. MoDAF initializes the design space using the most representative and diverse samples. It adopts a divide-and-conquer approach, utilizing Monte Carlo Tree Search (MCTS) and space partitioning techniques to dynamically break down the complex design space into more manageable subspaces. A hybrid model handles local fluctuations within each subspace, while a dual sampling algorithm is designed to increase sampling efficiency. MoDAF also incorporates a fast evaluation model to estimate CGRA throughput and area, significantly speeding up the exploration process. Compared with previous approaches, experiments show that our proposed framework reduces the average distance from the reference set by 53.0% and the hypervolume deviation by 64.2%, while also cutting wall time by 57.5%.

One of the grand challenges in the design of portable/wearable electronics is to achieve optimal efficiency and flexibility in a tiny low power package. Coarse grained reconfigurable architectures (CGRAs) hold great promise for low power, high performance, and flexible designs for a domain of applications. CGRAs are very promising due to the ability to highly customize such architectures to an application domain. However, greater customization makes the mapping of applications onto these architectures very challenging. Good tools and fast, effective mapping algorithms are needed to support design space exploration for CGRAs. In particular, the mapping problem has been difficult to solve in a satisfying and general way. In this paper, we present an architectural design flow using crowdsourcing to provide mappings of benchmarks onto new architectures. We show that the crowd can provide high quality, reliable mappings, significantly outperforming our custom Simulated Annealing algorithm in almost all cases. We further show that the crowd can provide other types of feedback that are difficult to obtain from an automatic mapping algorithm. Our proof of concept cross-architectural study supports an 8Way or 4Way1Hop architecture as a top choice, concludes that a custom modification that constrains inputs and outputs consumes less energy but requires more area than its less constrained counterpart, and suggests that Stripe architectures are interesting to consider because they perform nearly as well as our mesh variants and may present a more straightforward mapping problem for the crowd or an automatic mapping algorithm.

Coarse-grained reconfigurable architecture (CGRA) is a promising accelerator design choice due to its high performance and power efficiency in the computation or data-intensive application domains, such as security, multimedia, digital signal processing, machine learning, and high-performance computing. CGRA consists of coarse-grained processing elements (PEs) and interconnects that determine the architecture flexibility to support different applications and also affect the performance and power efficiency significantly. Although multiple types of interconnects have been proposed, a parameterized unified model is still lacking. In this paper, we propose a flexible and scalable CGRA template with a novel interconnect model that can unify the typical neighbor-to-neighbor, switch-based, and FPGA-like interconnects. Furthermore, we present TRAM, an open-source template-based reconfigurable architecture modeling framework that integrates the Chisel-based CGRA modeling, architecture intermediate representation (IR) and Verilog generation, dataflow graph (DFG) mapping, simulation, and evaluation. The mapping flow contains graph-based placement and routing, critical-path-driven data synchronization, and simulated-annealing-based optimization. We evaluate the impacts of the rich design parameters, which demonstrate the significance of such a flexible template to facilitate architecture optimization. Compared with the related work, TRAM can achieve a 4.1× smaller DFG latency and a faster mapping speed for both the 8×8 and 16×16 CGRAs. Moreover, TRAM is able to attain an extremely high PE utilization of 94.4 % on average by architecture tuning.

In this paper, a general visualization tool for coarse-grained reconfigurable architecture (CGRA) modeling is introduced. Recently, the increasing requirement for efficient and flexible architectures has significantly boosted the interests in CGRA. However, not too much attention has been paid to visualization tools for the development of CGRAs. This paper contains two main parts of contribution. Firstly, the CGRAs are built with a high level modeling language called FDL. Secondly, a user interface which could present all the information in the FDL model is obtained. Furthermore, the generated configuration bit stream helps to build routing paths on the interface.

Energy efficient configuration unification and compression for CGRAs

Coarse-grained reconfigurable array architectures have drawn increasing attention due to their performance and flexibility. A typical coarse-grained reconfigurable array architecture has many PEs in the array, which is suitable for implementing spatial redundancy used for fault-tolerant systems design. In this paper, we propose to implement replications and a voting function on the PE array of a coarse-grained reconfigurable array architecture to design a fault-tolerant system. We also introduce thermal-aware application mapping onto the coarse-grained reconfigurable array architecture for reliability. The experiment with Viterbi decoder shows that our approach enables implementing fault-tolerance with 12% area overhead which comes from implementing conditional execution.

Coarse-grained reconfigurable architectures (CGRAs) are increasingly employed as domain-specific accelerators due to their efficiency and flexibility. However, the existing CGRA architectures suffer from low hardware resource utilization and performance due to the limitations of the scheduling scheme. In this article, an adaptive scheduler (denoted as DPTM) for concurrent and multi-task interleaved pipelining-oriented CGRA is introduced, which exploits timeslot matching and release methods to avoid the pipeline conflicts and improve the scheduling performance. The characteristics of task scheduling based on directed acyclic graph (DAG) are analyzed, and several performance-influencing factors are extracted to build a scheduling performance model for reducing the time cost of scheduling and guiding the design of scheduling schemes. Moreover, the scoreboard method of dynamic instruction schedulers is optimized to control the entry time of multiple tasks into the pipeline, and then a timeslot matching method is proposed to provide non-conflict pipelining for the multiple tasks. Further, a timeslot release method is presented to release the timeslots for unscheduled sub-tasks dynamically, which can adapt the parallel processing of multiple tasks and decrease the scheduling time. Then, an adaptive scheduling scheme combines the dynamic priority-based task assignment method, timeslot matching method, and timeslot release method to schedule massive tasks for CGRA. Finally, the overall architecture of DPTM is introduced and designed to validate the efficacy of the proposed scheduling scheme. Experimental results show that the proposed timeslot matching/release approach reduces 84% total scheduling time and decreases 40% average scheduling time at most compared to the non-timeslot-matching scheduling schemes, the proposed task assignment approach decreases 8% total scheduling time and lowers 3% average scheduling time compared to the existing approaches, and the proposed scheduler decreases 51% critical path delay, lowers 35% area overhead, and reduces 12% power consumption at most compared with the existing schedulers.

Mobile computing as exemplified by the smart phone has become an integral part of our daily lives. The next generation of these devices will be driven by providing richer user experiences and compelling capabilities: higher definition multimedia, 3D graphics, augmented reality, and voice interfaces. To meet these goals, the core computing capabilities of mobile terminals must be scaled within highly constrained energy budgets. Coarse-grained reconfigurable architectures (CGRAs) are an appealing hardware platform for mobile systems by providing programmability with the potential for high computational throughput, low cost, and energy efficiency. CGRAs are most commonly used for innermost loops that contain an abundance of instruction-level parallelism. Unfortunately, current CGRAs fail to meet future performance requirements due to their inability to scale. Simply increasing the size of the array is too expensive in terms of power and area. In this paper, we first perform a deep analysis of several mobile applications from the domains of multimedia and gaming. We then explore potential solutions in the context of these applications for scaling the array performance in an energy efficient manner: homogeneous versus heterogeneous functionality, interconnect topologies, simple versus complex processing elements, and scalar versus vector memory support.

Coarse-grained reconfigurable architectures (CGRAs) present an appealing hardware platform by providing the potential for high computation throughput, scalability, low cost, and energy efficiency. CGRAs consist of an array of function units and register files often organized as a two dimensional grid. The most difficult challenge in deploying CGRAs is compiler scheduling technology that can efficiently map software implementations of compute intensive loops onto the array. Traditional schedulers focus on the placement of operations in time and space. With CGRAs, the challenge of placement is compounded by the need to explicitly route operands from producers to consumers. To systematically attack this problem, we take an edge-centric approach to modulo scheduling that focuses on the routing problem as its primary objective. With edge-centric modulo scheduling (EMS), placement is a by-product of the routing process, and the schedule is developed by routing each edge in the dataflow graph. Routing cost metrics provide the scheduler with a global perspective to guide selection. Experiments on a wide variety of compute-intensive loops from the multimedia domain show that EMS improves throughput by 25% over traditional iterative modulo scheduling, and achieves 98% of the throughput of simulated annealing techniques at a fraction of the compilation time.

Coarse-Grained Reconfigurable Architectures (CGRAs), which provide good trade-offs between performance, hardware/ energy efficiency and flexibility, as well as offer high degree of parallelism, are fast emerging as a competing platform for the high-performance and embedded applications [3]. In this paper, we propose a timing driven approach for generating cycle-accurate high level simulator for CGRA. The simulator is generated from a high-level language describing the CGRA. Experimental results on different architectures and application kernels show that the proposed simulator is \(1.5\times \) to \(4\times \) faster than state-of-the-art RTL simulators.