An improved SVM classifier based on double chains quantum genetic algorithm and its application in analogue circuit diagnosis

The problem with development of the support vector machine (SVM) classifiers using modified particle swarm optimization (PSO) algorithm and their ensembles has been considered. Solving this problem would allow fulfilling the high-precision data classification, especially Big Data classification, with the acceptable time expenditures. The modified PSO algorithm conducts a simultaneous search of the type of kernel functions, the parameters of the kernel function and the value of the regularization parameter for the SVM classifier. The idea of particles' «regeneration» served as the basis for the modified PSO algorithm. In the implementation of this algorithm, some particles change the type of their kernel function to the one which corresponds to the particle with the best value of the classification accuracy. The offered PSO algorithm allows reducing the time expenditures for the developed SVM classifiers, which is very important for Big Data classification problem. In most cases such SVM classifier provides the high quality of data classification. In exceptional cases the SVM ensembles based on the decorrelation maximization algorithm for the different strategies of the decision-making on the data classification and the majority vote rule can be used. Also, the two-level SVM classifier has been offered. This classifier works as the group of the SVM classifiers at the first level and as the SVM classifier on the base of the modified PSO algorithm at the second level. The results of experimental studies confirm the efficiency of the offered approaches for Big Data classification.

Performance analysis of SAR filtering techniques using SVM and Wishart Classifier

A boosted SVM classifier trained by incremental learning and decremental unlearning approach

In order to improve the performance of Support Vector Machine (SVM) classifier for imbalanced data, this paper proposes dynamic cost-sensitive SVM classifier based on chaos particle swarm optimization (CPDC_SVM). Firstly, this paper introduces dynamic cost-sensitive thought to SVM classifier, and gives the method for structuring dynamic cost and cost-sensitive SVM model. Secondly, we propose the evaluation methodology performance for classifier, and adopts decimal base to code the particles. At last, chaos thought is introduced in particle swarm optimization algorithm, and the Algorithm of the dynamic cost-sensitive SVM classifier is given, which improves convergent speed and accuracy of particle swarm optimization, and can optimize dynamic cost-sensitive SVM well, so CPDC_SVM adds effectively the convergence speed and accuracy for the particle swarm optimization algorithm. Experimental results show CPDC_SVM has higher precision than traditional SVM classifier, and dynamic cost and chaos particle swarm optimization can improve the performance for classifier.

BackgroundThis study aimed to screen the feature modules and characteristic genes related to ulcerative colitis (UC) and construct a support vector machine (SVM) classifier to distinguish UC patients.MethodsFour datasets that contained UC and control samples were obtained from the Gene Expression Omnibus database. Differentially expressed genes (DEGs) with consistency were screened via the MetaDE method. The weighted gene coexpression network (WGCNA) was used to distinguish significant modules based on the four datasets. The protein–protein interaction network was established based on intersection genes. Enrichment analysis of Gene Ontology (GO) biological processes (BPs) and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway enrichment were established based on DAVID. An SVM combined with recursive feature elimination was also applied to construct a disease classifier for the disease diagnosis of UC patients. The efficacy of the SVM classifier was evaluated through receiver operating characteristic curves.ResultsTwelve highly preserved modules were obtained using the WGCNA, and 2009 DEGs with significant consistency were selected using the MetaDE method. Sixteen significantly related GO BPs and 12 KEGG pathways were obtained, such as cytokine-cytokine receptor interaction, cell adhesion molecules, and leukocyte transendothelial migration. Subsequently, 41 genes were used to construct an SVM classifier, such as CXCL1, CCR2, IL1B, and IL1A. The area under the curve (AUC) was 0.999 in the training dataset, whereas the AUC was 0.886, 0.790, and 0.819 in the validation set (GSE65114, GSE37283, and GSE36807, respectively).ConclusionsAn SVM classifier based on feature genes might correctly identify healthy people or UC patients.

Failure of power transformer is very complex, so that it is difficult to use the mathematical model to describe their faults. In this study, an intelligent diagnostic method based on ant colony-support vector machine (AC-SVM) approach is presented for fault diagnosis of power transformer. The AC-SVM selects kernel function parameter and soft margin constant C penalty parameter of support vector machine (SVM) classifier. The performance of the AC-SVM system proposed in this study is evaluated by cases in China. The test results show that this AC-SVM model is effective to detect failure of power transformer.

This study investigated the effect of a new approach, the support vector machine, as a classifier tool to identify the weeds in corn fields at early growth stage. Image segmentation was done by transforming original color images to gray level images according to the statistical values of red, green, blue components. The Gray Level Co-occurrence Matrix (GLCM) and statistical properties of the histogram from the gray level images were further used to obtain the texture features of the weeds and corn seedlings. These texture features were used in the classification procedure. Principle component analysis was used to select the texture features according to their better contributions to reduce space dimensions. A Support Vector Machine (SVM) classifier was employed to recognize the weeds and the corn seedlings. The results indicated that the SVM classifiers with different feature selections could identify successfully weed-corn with a higher accuracy ranged from 92.31 to 100%. A comparison study of the recognition capabilities of SVM and back-propagation (BP) neural-network classifier using the same data set was conducted. It was found that the SVM classifier provided the best recognition performance with an accuracy of 100%, which exceeded the accuracy of 80% given by the BP classifier. Key words: Corn seedling, weeds, texture, support vector machine, recognize.

The conventional method used in forest inventory is time-consuming, especially in field surveying and requires an expert’s knowledge and observation to do species identification. This standard method can be facilitated by advances in remote sensing technology. An airborne hyperspectral image mosaic was utilised in the research to evaluate the ability of this high spectral fidelity dataset that was incorporated into a feature extraction Support Vector Machine (SVM) classifier to successfully detect and map a tree species of interest (Shorea kunstleri King) within the mixed dipterocarp forest stand of the Lambir Hills National Park. In this study, two types of feature extraction Principal Component Analysis (PCA) and Spectral Derivative (SD) were applied to classifiers SVM. To demonstrate the effect, classification of the hyperspectral image with no feature extraction was done. The accuracies achieved from different feature extraction were compared statistically. Based on the results, Shorea kunstleri King was able to be discriminated against within 53 species of Shorea. SVM classifier is known for its ability to generalise well even with limited training samples and is commonly used in image classification. The Kernel parameter in SVM classifier alongside feature extraction significantly affects the classification accuracy. Therefore, feature extraction does affect the classification accuracy, but it depends on the morphology of the study area. It is concluded that the SVM method with SD feature extraction could detect tree crowns of Shorea kunstleri with a Kappa coefficient of 0.8126 which showed a great agreement with the observed samples and overall accuracy of 89.89% that shows the accuracy of the final map.

We perceive the digital watermark detection as classification problem in image processing. We classify watermarked images as positive class whilst unwatermarked images as negative class. Support Vector Machine (SVM) is used as classifier of the watermarked and unwatermarked digital images. Two watermarking schemes i.e. Cox's spread spectrum (SS) and Single Value Decomposition (SVD) are used to embed watermark into digital images. These algorithms are selected based on their different level of robustness to Stirmark attacks. The payload of the watermark used for both algorithms is consistent at certain number of bits. SVM is trained with both the watermarked and unwatermarked images. Receiver Operating Characteristics (ROC) graphs are plotted to assess the statistical detection behavior of both the correlation detector and SVM classifier. We found that straight forward application of SVM leads to generalization problem. We suggest remedies to preprocess the training data in order to achieve substantially better performance from SVM classifier than those resulting from the straightforward application of SVM. Both watermarked and unwatermarked images are attacked under Stirmark and are then tested with the correlation detectors and SVM classifier. A comparison of the ROC of the correlation detectors and SVM classifier is performed to assess the accuracy of SVM classifier relative to correlation detectors. We found that SVM classifier has higher robustness to Stirmark attacks.

Determining optimal bead central angle by applying machine learning to wire arc additive manufacturing (WAAM)

In this Letter, the authors present a unified framework for fall event detection and classification using the cumulants extracted from the acceleration (ACC) signals acquired using a single waist-mounted triaxial accelerometer. The main objective of this Letter is to find suitable representative cumulants and classifiers in effectively detecting and classifying different types of fall and non-fall events. It was discovered that the first level of the proposed hierarchical decision tree algorithm implements fall detection using fifth-order cumulants and support vector machine (SVM) classifier. In the second level, the fall event classification algorithm uses the fifth-order cumulants and SVM. Finally, human activity classification is performed using the second-order cumulants and SVM. The detection and classification results are compared with those of the decision tree, naive Bayes, multilayer perceptron and SVM classifiers with different types of time-domain features including the second-, third-, fourth- and fifth-order cumulants and the signal magnitude vector and signal magnitude area. The experimental results demonstrate that the second- and fifth-order cumulant features and SVM classifier can achieve optimal detection and classification rates of above 95%, as well as the lowest false alarm rate of 1.03%.

This paper presents a preliminary exploration showing the surprising effect of extreme parameter values used by Support Vector Machine (SVM) classifiers for identifying objects in images. The Radial Basis Function (RBF) kernel used with SVM classifiers is considered to be a state-of-the-art approach in visual object classification. Standard tuning approaches apply a relative narrow window of values when determining the main parameters for kernel size. We evaluated the effect of setting an extremely small kernel size and discovered that, contrary to expectations, in the context of visual object classification for some object and feature combinations these small kernels can demonstrate good classification performance. The evaluation is based on experiments on the TRECVid 2013 Semantic INdexing (SIN) training dataset and provides initial indications that can be used to better understand the optimisation of RBF kernel parameters.

Support vector machine (SVM) classifiers are popular in many computer vision tasks. In most of them, the SVM classifier assumes that the object to be classified is centered in the query image, which might not always be valid, e.g., when locating and classifying a particular class of vehicles in a large scene. In this paper, we introduce a new classifier called Maximum Margin Correlation Filter (MMCF), which, while exhibiting the good generalization capabilities of SVM classifiers, is also capable of localizing objects of interest, thereby avoiding the need for image centering as is usually required in SVM classifiers. In other words, MMCF can simultaneously localize and classify objects of interest. We test the efficacy of the proposed classifier on three different tasks: vehicle recognition, eye localization, and face classification. We demonstrate that MMCF outperforms SVM classifiers as well as well known correlation filters.

Gene expression data using retrieved ovarian cancer (OC) samples were used to identify genes of interest and a support vector machine (SVM) classifier was subsequently established to predict the recurrence of OC. Three datasets (GSE17260, GSE44104 and GSE51088) investigating OC gene expression were downloaded from the Gene Expression Omnibus. Differentially expressed genes (DEGs) in samples from patients with non-recurrent and recurrent OC were revealed via a homogeneity test and quality control analysis. A protein-protein interaction (PPI) network was subsequently established for the DEGs using data from Biological General Repository for Interaction Datasets, Human Protein Reference Database and Database of Interacting Proteins. Degrees of interaction and betweenness centrality (BC) scores were calculated for each node in the PPI network. The top 100 genes ranked by BC scores were selected to identify feature genes via recursive feature elimination using the GSE17260 dataset. Following this, a SVM classifier was constructed and further validated using the GSE44104 and GSE51088 datasets and independent gene expression data obtained from the Cancer Genome Atlas (TCGA). A total of 639 DEGs were identified from the three gene expression datasets, and a PPI network including 249 nodes and 354 edges was constructed. A SVM classifier consisting of 39 feature genes (including cullin 3, mouse double minute 2 homolog, aurora kinase A, WW domain containing oxidoreducatase, large tumor suppressor kinase 2, sirtuin 6, staphylococcal nuclease and tudor domain containing 1, leucine rich repeats and immunoglobulin like domains 1 and aurora kinase 1 interacting protein 1) was subsequently constructed. The prediction accuracies of the SVM classifier for GSE17260, GSE44104 and GSE51088 datasets as well as data downloaded from TCGA were revealed to be 92.7, 93.3, 96.6 and 90.4%, respectively. Furthermore, the results of the present study revealed that patients with predicted non-recurrent OC survived significantly longer compared with the patients with predicted recurrent OC (P=6.598×10−6). A SVM classifier consisting of 39 feature genes was established for predicting the recurrence and prognosis of OC. Therefore, the results of the present study suggested that the 39 feature genes may serve important roles in the development of OC and may represent therapeutic biomarkers of OC.

Rough set classifier or SVM (Support Vector Machine) classifier is a typical machine learning model. The Rough set classifier and SVM classifier are used to classify nodes as trust nodes, strange nodes and malicious nodes. We use the Rough set classifier to replace the method by settings of the threshold. The innovation of the article is to improve the computation accuracy and the efficiency of the classification computation by using Rough set combined with SVM classifier. In the cases where according to the value of an attribute or the values of two attributes the corresponding classification result can be determined, we use the Rough set classifier. In other cases, we use SVM classifier. Compared with existing security models, experiment results indicate that the model can obtain the higher examination rate of malicious nodes and the higher transaction success rate.