An optimized support vector machine intelligent technique using optimized feature selection methods: evidence from Chinese credit approval data

Cancer survival classification using integrated data sets and intermediate information.

We develop and validate a radiomics model based on multiparametric magnetic resonance imaging (MRI) in the classification of the pulmonary lesion and identify optimal machine learning methods. This retrospective analysis included 201 patients (143 malignancies, 58 benign lesions). Radiomics features were extracted from multiparametric MRI, including T2-weighted imaging (T2WI), T1-weighted imaging (TIWI), and apparent diffusion coefficient (ADC) map. Three feature selection methods, including recursive feature elimination (RFE), t test, and least absolute shrinkage and selection operator (LASSO), and three classification methods, including linear discriminate analysis (LDA), support vector machine (SVM), and random forest (RF) were used to distinguish benign and malignant pulmonary lesions. Performance was compared by AUC, sensitivity, accuracy, precision, and specificity. Analysis of performance differences in three randomly drawn cross-validation sets verified the stability of the results. For most single MR sequences or combinations of multiple MR sequences, RFE feature selection method with SVM classifier had the best performance, followed by RFE with RF. The radiomics model based on multiple sequences showed a higher diagnostic accuracy than single sequence for every machine learning method. Using RFE with SVM, the joint model of T1WI, T2WI, and ADC showed the highest performance with AUC = 0.88 ± 0.02 (sensitivity 83%; accuracy 82%; precision 91%; specificity 79%) in test set. Quantitative radiomics features based on multiparametric MRI have good performance in differentiating lung malignancies and benign lesions. The machine learning method of RFE with SVM is superior to the combination of other feature selection and classifier methods. • Radiomics approach has the potential to distinguish between benign and malignant pulmonary lesions. • Radiomics model based on multiparametric MRI has better performance than single-sequence models. • The machine learning methods RFE with SVM perform best in the current cohort.

Sentiment classification has become one of the most popular text classification domains especially in recent years. As it is valid for all text classification problems, high dimensionality of the feature space is one of the most important concerns for sentiment classification due to accuracy considerations. This study analyses the performance of six recent text feature selection methods for document level sentiment classification using two widely-known classifiers namely Support Vector Machines (SVM) and naive Bayes (NB). Three datasets including different types of sentiment data were utilized in the experiments. These datasets are named as Cornell movie review, Sentiment140, and Nine public sentiment. For evaluation, two different success measures namely Micro-F1 and Macro-F1 were used. Also, 3-fold cross-validation is preferred for a fair system performance evaluation. Experiments indicated that distinguishing feature selector (DFS) and discriminative features selection (DFSS) methods are superior to the other four feature selection methods for sentiment classification. The highest classification performances with SVM classifier were obtained when it is combined with DFSS feature selection method in general. On the other hand, highest classification performances with NB classifier were obtained when it is combined with DFS feature selection method.

Recent remote sensing literature has shown that support vector machine (SVM) methods generally outperform traditional statistical and neural methods in classification problems involving hyperspectral images. However, there are still open issues that, if suitably addressed, could allow further improvement of their performances in terms of classification accuracy. Two especially critical issues are: 1) the determination of the most appropriate feature subspace where to carry out the classification task and 2) model selection. In this paper, these two issues are addressed through a classification system that optimizes the SVM classifier accuracy for this kind of imagery. This system is based on a genetic optimization framework formulated in such a way as to detect the best discriminative features without requiring the a priori setting of their number by the user and to estimate the best SVM parameters (i.e., regularization and kernel parameters) in a completely automatic way. For these purposes, it exploits fitness criteria intrinsically related to the generalization capabilities of SVM classifiers. In particular, two criteria are explored, namely: 1) the simple support vector count and 2) the radius margin bound. The effectiveness of the proposed classification system in general and of these two criteria in particular is assessed both by simulated and real experiments. In addition, a comparison with classification approaches based on three different feature selection methods is reported, i.e., the steepest ascent (SA) algorithm and two other methods explicitly developed for SVM classifiers, namely: 1) the recursive feature elimination technique and 2) the radius margin bound minimization method

The right and left-hand motor imagery (MI) analysis based on the electroencephalogram (EEG) signal can directly link the central nervous system to a computer or a device. This study aims to identify a set of robust and nonlinear effective brain connectivity features quantified by transfer entropy (TE) to characterize the relationship between brain regions from EEG signals and create a hierarchical feature selection and classification for discrimination of right and lefthand MI tasks. TE is calculated among EEG channels as the distinctive, effective connectivity features. TE is a model-free method that can measure nonlinear effective connectivity and analyze multivariate dependent directed information flow among neural EEG channels. Then four feature subset selection methods namely relief-F, Fisher, Laplacian, and local learningbased clustering (LLCFS) algorithms are used to choose the most significant effective connectivity features and reduce redundant information. Finally, support vector machine (SVM) and linear discriminant analysis (LDA) methods are used for classification. Results show that the best performance in 29 healthy subjects and 60 trials is achieved using the TE method via the Relief-F algorithm as feature selection and support vector machine (SVM) classification with 91.02% accuracy. The TE index and a hierarchical feature selection and classification can be useful for the discrimination of right- and left-hand MI tasks from multichannel EEG signals. Effective connectivity features were extracted from electroencephalogram (EEG) to analyze relationships between regions.Four feature selection methods used to select most significant effective features.Support vector machine (SVM) used for discrimination of right and left hand motor imagery (MI) task. In this study, we investigated brain activity using effective connectivity during MI task based on EEG signals. The motor imagery task can accomplish the same goal as motor execution, since they are both activated by the same brain area. Transfer entropy, coherence, and Granger casualty were employed to extract the features. Differential patterns of activity between the left vs. right MI task showed activity around the motor area rather than other areas. In order to reduce redundant information and select the most significant effective connectivity features, four feature subset selection algorithms are used: Relief-F, Fisher, Laplacian, and learning-based clustering feature selection (LLCFS). Then, support vector machine (SVM) and linear discriminant analysis (LDA) are used to classify left and right hand MI task. Comparison of three different connectivity methods showed that TE index had the highest classification accuracy, and could be useful for the discrimination of right and left hand MI tasks from multichannel EEG signals.

This paper presents a novel feature selection method which is named filtered and supported sequential forward search (FS/spl I.bar/SFS) in the context of support vector machines (SVM). In comparison with conventional wrapper methods employing the sequential forward search (SFS) strategy, it has two important properties that reduce the computation time of SVM training during the feature selection process. First, instead of utilizing all the training samples to obtain the classifier, FS/spl I.bar/SFS, by taking advantage of the existence of support vectors in SVM, dynamically maintains an active data set for each SVM to be trained on. In this way, the computational demand of a single SVM training decreases. Secondly, a new criterion, in which the discriminant ability of individual features and the correlation between them are both taken into consideration, is proposed to effectively filter out non-essential features before every SFS iteration begins. As a result, the total amount of training is significantly reduced. The proposed approach is tested on both synthetic and real data to demonstrate its effectiveness and efficiency.

Biomedical data are widely accepted in developing prediction models for identifying a specific tumour, drug discovery and human cancers detection. However, previous studies usually focused on different classifiers, and overlook the class imbalance problem in real-world biomedical datasets. This paper mainly focuses on reviewing and evaluating some popular and recently developed resampling and feature selection (FS) methods for class imbalance learning with data distribution being considered. Experimental results show that: 1) resampling and FS techniques exhibit better performance using support vector machine (SVM) classifier; 2) techniques such as random undersampling and FS perform better than other data pre-processing methods with T location-scale distribution when using SVM and K-nearest neighbours (KNN) classifiers. Random oversampling outperforms other methods on negative binomial distribution using Random Forest with lower level of imbalance ratio; 3) FS outperforms other data pre-processing methods in most cases, thus, FS with SVM classifier is the best choice for imbalanced biomedical data learning.

This paper presents an effective feature selection method for support vector machine (SVM). Unlike the traditional combinatorial searching method, feature selection is translated into the model selection of SVM which has been well studied. In more detail, the basic idea of this method is to tune the parameters of the Gaussian ARD (Automatic Relevance Determination) kernel via optimization of kernel polarization, and then to rank all features in decreasing order of importance so that more relevant features can be identified. The proposed method is tested on two UCI data sets to demonstrate its effectiveness.

The research focuses on the classification of nutrient deficiencies in rice plant leaves using a combination of Support Vector Machine (SVM) and Particle Swarm Optimization (PSO) methods for feature selection. Image features are extracted using Histogram of Oriented Gradients (HOG), which is then optimized with PSO to select the most relevant features in the classification process. Indonesia is one of the largest rice producers in the world, with food security as a major issue that requires sustainable solutions, especially in the agricultural sector. The growth and yield of rice plants are highly dependent on the availability of nutrients such as Nitrogen (N), Phosphorus (P), and Potassium (K). However, traditional observation methods to detect nutrient deficiencies in plants become inefficient as the scale of production increases. The dataset used includes images of rice leaves showing nitrogen (N), phosphorus (P), and potassium (K) deficiencies. Experiments show that the SVM model optimized with PSO provides a classification accuracy of 83.19% and a runtime of 129.63 seconds with 1150 best feature combinations out of 2303 extracted features, which is higher accuracy and faster runtime than the model that does not use PSO. These results show that the integration of PSO in the feature selection process not only improves the accuracy of the model, but also reduces the required computation time. This research makes an important contribution to the development of an automated system for the classification of nutrient deficiencies in crops, which can be implemented in large farms or other agricultural fields.

Accurate estimation of river flow can have a significant importance in water resources management. In this study, Genetic programming (GP) and Support Vector Machine (SVM) methods were used to forecast daily discharge of Barandoozchay River. The daily discharge data of Barandoozchay River measured at the Dizaj hydrometric station during 2007 to 2011 was used for modeling, which 80% of the data used for training and remaining 20% used for testing of models. The results showed that in the both of considered methods, the models including discharges of one, two and three days ago had higher accuracy in verification step and the accuracy of models decreased with increasing discharge values. Comparing the performance of GP and SVM methods indicated that, however the accuracy of the GP method with the R=0.978 and RMSE=1.66 (m3/s) was slightly more than SVM method with R=0.976 and RMSE=1.80 (m3/s), but the SVM is easier than GP method. Thus, the SVM method can be used as an alternative method in forecasting daily river discharge.

The specifications of the forests in Kalimantan are part of the vegetation type which is characteristic of dry lowland forests that are rich in biodiversity. The Kalimantan forest area is known as an area that has the highest vascular biodiversity in the world. Until 2014, the rate of forest loss as a source of biodiversity was always high every year. The National Polar-Orbiting Suomi Partnership (Suomi NPP) is a new generation of weather satellite imagery from NASA which currently continues to develop application algorithms for environmental monitoring. The support vector machine (SVM) method is a one-class learning machine method with artificial neural network methods that can recognize patterns from input or examples given and also include supervised learning. This study aims to analyze the effect of each parameter on the SVM method and the combination that can produce the highest accuracy, and analyze the ability of the SVM method for making hotspot maps based on the number of forest fire areas in East Kalimantan. The results of the study showed that the Support Vector Machine (SVM) method on the spectral data produced a total of 85%.

Accuracy of data and information on various types of land use and land cover (LULC) is crucial in watershed management planning. The development of remote sensing technology in predicting LULC has been widely used, such as the Support Vector Machine (SVM) and Random Trees (RT) methods. Both methods are part of the model of machine learning and belong to the category of supervised learning. This method can predict, study, and recognize data patterns from the results of training data. The aim of this research is the use of SVM and RT methods for the identification of LULC. Based on the SVM method analysis results, the forest area is 211.61 km2, coffee plantations are 32.92 km2, shrubs are 16.85 km2, built-up/bare land is 3.40 km2, the water body is 3.17 km2, and cloud/shadow is 6.79 km2. While the RT method obtained a forest area of 215.51 km2, coffee plantations covering an area of 29.32 km2, shrubs are covering an area of 16.32 km2, built-up/bare land surrounding an area of 7.22 km2, water body covering an area of 2.62 km2, and cloud/shadow covering an area of 3.75 km2. Overall, the percentage accuracy of the SVM method of 87%, and the RT of 86%. The success rate of modeling SVM (AUC = 0.73) and RT (AUC = 0.75) based on the results of data validation using the area under the receiver operating characteristic curve (AUC) was considered fair good.

Feature-based quality classification for ultrasonic welding of carbon fiber reinforced polymer through Bayesian regularized neural network

With the rapid development of artificial intelligence in recent years, the research on image processing, text mining, and genome informatics has gradually deepened, and the mining of large-scale databases has begun to receive more and more attention. The objects of data mining have also become more complex, and the data dimensions of mining objects have become higher and higher. Compared with the ultra-high data dimensions, the number of samples available for analysis is too small, resulting in the production of high-dimensional small sample data. High-dimensional small sample data will bring serious dimensional disasters to the mining process. Through feature selection, redundancy and noise features in high-dimensional small sample data can be effectively eliminated, avoiding dimensional disasters and improving the actual efficiency of mining algorithms. However, the existing feature selection methods emphasize the classification or clustering performance of the feature selection results and ignore the stability of the feature selection results, which will lead to unstable feature selection results, and it is difficult to obtain real and understandable features. Based on the traditional feature selection method, this paper proposes an ensemble feature selection method, Random Bits Forest Recursive Clustering Eliminate (RBF-RCE) feature selection method, combined with multiple sets of basic classifiers to carry out parallel learning and screen out the best feature classification results, optimizes the classification performance of traditional feature selection methods, and can also improve the stability of feature selection. Then, this paper analyzes the reasons for the instability of feature selection and introduces a feature selection stability measurement method, the Intersection Measurement (IM), to evaluate whether the feature selection process is stable. The effectiveness of the proposed method is verified by experiments on several groups of high-dimensional small sample data sets.

This study investigated the effect of a new approach, the support vector machine, as a classifier tool to identify the weeds in corn fields at early growth stage. Image segmentation was done by transforming original color images to gray level images according to the statistical values of red, green, blue components. The Gray Level Co-occurrence Matrix (GLCM) and statistical properties of the histogram from the gray level images were further used to obtain the texture features of the weeds and corn seedlings. These texture features were used in the classification procedure. Principle component analysis was used to select the texture features according to their better contributions to reduce space dimensions. A Support Vector Machine (SVM) classifier was employed to recognize the weeds and the corn seedlings. The results indicated that the SVM classifiers with different feature selections could identify successfully weed-corn with a higher accuracy ranged from 92.31 to 100%. A comparison study of the recognition capabilities of SVM and back-propagation (BP) neural-network classifier using the same data set was conducted. It was found that the SVM classifier provided the best recognition performance with an accuracy of 100%, which exceeded the accuracy of 80% given by the BP classifier. Key words: Corn seedling, weeds, texture, support vector machine, recognize.