Analysis and optimization of injection molding process on warpage based on Taguchi design and PSO algorithm

Collaborative beamforming in wireless sensor networks using a novel particle swarm optimization algorithm variant

Neural Network system for SoC is one topic in the world. Recently, SoC began to combine AI technique by Python. When developers consider Intelligent system on SoC, the co-design software and hardware are significant. In this case, small devices and embedded system are target system. For IoT, those techniques will grow up in the world. Those cases, avoiding premature convergence while keeping performance is a challenge in training the neural network, especially in a case of large NNs or a large number of training data. In this case, one problem is a huge memory and processing power. For tiny memory and processing system as SoC, we propose an improved particle swarm optimization (PSO) algorithm called the PSOseed2 algorithm for training NN. The PSOseed2 algorithm solves the premature convergence of the standard PSO (SPSO) algorithm by slightly modifying the velocity update function without adding many computational tasks to the SPSO algorithm. We evaluated this algorithm on field programmable gate array (FPGA)-based NN and software-based NN and trained these NNs with different PSO algorithms that are SPSO, PSOseed, PSOseed2, and dissipative PSO. Experimental results with different datasets confirmed that the NNs trained by the proposed PSOseed2 algorithm had better recognition rates and lower global learning errors than the NN trained by other PSO algorithms. In this talk, I would like to talk those relational research in the world and our results and discussion.

The particle swarm optimization (PSO) algorithm presents a new way for finding optimal solutions of complex optimization problems. In this paper a modified particle swarm optimization algorithm is presented. We modify the PSO algorithm in some aspects. Firstly, a contractive factor is introduced to the position update equation, and the particles are limited in search region. A new strategy for updating velocity is then adopted, in which the velocity is weakened linearly. Thirdly, using an idea of intersecting two modified PSO algorithms. Finally, adding an item of integral control in the modified algorithm can improve its global search ability. Based on these strategies, we proposed a new PSO algorithm named crossed PSO algorithm. Simulation results show that the crossed PSO is superior to the original PSO algorithm and can get overall promising performance over a wide range of problems.

The Particle swarm optimization (PSO) algorithm is a population-based intelligent stochastic search technique encouraged from the intrinsic manner of bee swarm seeking for their food source. With flexibility for numerical experimentation, the PSO algorithm has been mostly used to resolve diverse kind of optimization problems. The PSO algorithm is frequently captured in local optima meanwhile handling the complex real-world problems. Many authors improved the standard PSO algorithm with different mutation strategies but an exhausted comprehensive overview about mutation strategies is still lacking. This article aims to furnish a concise and comprehensive study of problems and challenges that prevent the performance of the PSO algorithm. It has tried to provide guidelines for the researchers who are active in the area of the PSO algorithm and its mutation strategies. The objective of this study is divided into two sections: primarily to display the improvement of the PSO algorithm with mutation strategies that may enhance the performance of the standard PSO algorithm to great extent and secondly, to motivate researchers and developers to use the PSO algorithm to solve the complex real-world problems. This study presents a comprehensive survey of the various PSO algorithms based on mutation strategies. It is anticipated that this survey would be helpful to study the PSO algorithm in detail for researchers.

The maximum power point tracking (MPPT) system ensures that the solar cell operates at its maximum power point, which is the point at which it produces the most power for a given set of conditions. This study uses an artificial bee colony (ABC) algorithm and particle swarm optimization (PSO) algorithms to optimize the boost converter. The ABC and PSO algorithms help to optimize the boost converter by finding the best possible duty cycle and other parameters that maximize efficiency. The resulting duty cycle of 20% produced the highest efficiency of 78.26% obtained from the boost converter. A system-wide test was conducted between 9:00 and 11:10 WIB. In MPPT systems using boost converters with the PSO algorithm, the average power is 16.80 W, while in MPPT systems using boost converters with the ABC algorithm, the average power is 14.53 W. The novelty of the study discusses a system designed to optimize power by using a boost converter in order to increase power output from solar panels. The algorithms PSO and ABC are used to analyze the data from the PV and adjust the converter parameters to optimize the output in order to increase the efficiency of the system.

In order to solve the problem of interaction between multiple evaluation indexes of seed metering performance under multiple factors of centralized seed feeding device, a multi-objective optimization of structure based on particle swarm optimization (PSO) algorithm was proposed in this paper. The wheat centralized seed feeding device was taken as the research object, and the experimental factors were cone angle of type hole, working speed and seed filling gap. The working process of wheat centralized seed feeding device was simulated by discrete element method (DEM). The average seed number of type hole, the variation coefficient of the average seed number of type hole, and the maximum tangential force between seed and seed feeding mechanism were selected as the evaluation indexes. Through the variance analysis of the evaluation indexes by the experimental factors, the optimization objective function was constructed. Using PSO algorithm, the multi-objective optimization was carried out for the wheat centralized seed feeding device. The optimization results show that the best structural combination parameters of the wheat centralized seed feeding device are the hole cone angle of 31.6° and the seed filling gap of 4.6 mm. The validity of the method was verified by simulation and field test. The results show that the PSO algorithm multi-objective optimization method proposed in this paper can provide a reference for the structural improvement and optimal design of the centralized seed feeding device. Keywords: centralized seed feeding device, multi-objective, optimization, PSO algorithm DOI: 10.25165/j.ijabe.20201306.5665 Citation: Wang Q Q, Li Z D, Wang W W, Zhang C L, Chen L Q, Wan L. Multi-objective optimization design of wheat centralized seed feeding device based on particle swarm optimization (PSO) algorithm. Int J Agric & Biol Eng, 2020; 13(6): 76–84.

A dynamic adaptive particle swarm optimization and genetic algorithm is presented to solve constrained engineering optimization problems. A dynamic adaptive inertia factor is introduced in the basic particle swarm optimization algorithm to balance the convergence rate and global optima search ability by adaptively adjusting searching velocity during search process. Genetic algorithm–related operators including a selection operator with time-varying selection probability, crossover operator, and n-point random mutation operator are incorporated in the particle swarm optimization algorithm to further exploit optimal solutions generated by the particle swarm optimization algorithm. These operators are used to diversify the swarm and prevent premature convergence. Tests on nine constrained mechanical engineering design optimization problems with different kinds of objective functions, constraints, and design variables in nature demonstrate the superiority of the dynamic adaptive particle swarm optimization and genetic algorithm against several other meta-heuristic algorithms in terms of solution quality, robustness, and convergence rate in most cases.

For many years, injection molding is adopted as the most suitable manufacturing process in the production of complex plastic components. It is very difficult to boost the product's quality stability to attain a higher forming speed and higher automation in the injection moulding process because the process often disrupted by numerous inevitable deviations. The settings for different process parameters and machine parameters have quite a major influence on the overall product quality and its performance of the injection moulding process, which shows the final product quality as output responses. Identifying the perfect process parameter settings so that numerous responses may be optimized at almost the same time is becoming a significant research challenge these days. Smart manufacturing is at the heart of the new industrial revolution, and it will continue to be the primary means of transforming and upgrading the manufacturing industry in the upcoming decades. Melt temperature, the temperature of mould, injection pressure, and velocity of molten polymer while injection, injection time, pressure of molten polymer while holding into the mold cavity, holding time of molten polymer, and cooling time are the variety of input process parameters.  While mechanical characteristics, flaws such as warpage, volumetric or dimensional shrinkage, sink mark on outer surface, residual stress, and surface finish/roughness are examples of responses. To study and optimize the molding process, researchers have used a wide range of methods. Mathematical modeling, simulation, design of experiments, Taguchi methodology, analysis of variance - ANOVA, response surface methodology - RSM, evolutionary algorithm (EA), artificial neural networks - ANN, genetic algorithms - GA, fuzzy logic, particle swarm optimization - PSO, are examples of these techniques. This paper presents a review of the numerous strategies that used till date for optimizing the key injection moulding parameters, as well as their benefits and challenges. In the review, it is discovered that a perfect injection molding process, which takes care of overall quality control is still being researched upon. The process parameters involved in injection molding, required response, and the methodologies used for optimization of overall injection molding process are discussed throughout this paper.

In our previous research applied to the job shop scheduling problem (JSSP) for machine tool production, the multi-objective optimisation model based on the particle swarm optimization (PSO) research had an imbalance performance between the convergence rate and the convergence precision. In this article, a new hybrid algorithm using PSO and generic algorithm (GA) is proposed to solve this particular problem. In this new algorithm, named hybrid PSO-GA algorithm (HPGA), the PSO algorithm is redefined and modified by introducing genetic operators, i.e. the crossover operator and the mutation operator, to update the particles in the population. The HPGA is then applied in heavy machinery company with minimising machines’ makespan and minimising jobs’ tardiness as the two optimal objectives. The comparisons with actual application report have illustrated that the proposed HPGA can obtain higher quality of schedule solution for machine tool production. Furthermore, with solution quality and convergence rate as the two estimation measurements metrics, some comparisons are performed in order to illustrate that the HPGA has superiority over the PSO, GA and simulated annealing algorithm (SA). Results have indicated that, with the combination of the merits of PSO and GA, the proposed HPGA approach can achieve not only better solution quality but also faster convergence rate than the PSO, GA and SA, within a reasonable computation time for high dimensions JSSP.

To solve the strong randomicity and slow convergence of the Particle Swarm Optimization(PSO) algorithms, two new particle’s position renewal formulas were analyzed on the basis of extrapolation in mathematics. A new modified PSO algorithms (called Leading PSO algorithms) was put forward. The Direct Torque Control(DTC) System was built in the environment of Matlab(Simulink). The weight and threshold values of BP Neural Network were trained using the modified PSO algorithms. Some disadvantages such as slow convergence speed and easily plunging into the local solution were avoided effectively. The simulation result shows that the system works well, and the rotor speed identifier has great static and dynamic performance.

To improve the simulation accuracy of disease prediction model, a modified hybrid algorithm combining BP neural network (BPNN) with particle swarm optimization (PSO) algorithm based on chaos theory optimization is proposed considering BPNN is easy to fall into the local extremum. The chaos theory is used to optimize PSO algorithm to overcome the premature convergence of the traditional PSO algorithm. Then, the improved CAPSO algorithm is used to train the BPNN, to make full use of the global search characteristic of PSO algorithm and the local search ability of BPNN. The fitness function of the PSO algorithm is used as the energy function, and the optimization method of the improved hybrid algorithm is selected according to the specified number of evolution. An optimized network model was used to predict the prevalence of coronary heart disease. Compared with other algorithms such as BP neural network, the results show that the proposed algorithm has high accuracy and can significantly improve the quality of prediction.

In this paper, we present a concept of a transistor level implementation of the Particle Swarm Optimization (PSO) algorithm that belongs to the group of unsupervised learning algorithms aimed at the design of artificial neural networks (ANNs). The algorithm exhibits an ability to search for an optimal solution in a multidimensional data space, in which many sub-optimal solutions may exist. The ANN that operates in accordance with the PSO algorithm is composed of a set of cooperating particles (agents) that explore an input data space and communicate information on the best found solution to other particles. The PSO algorithm is usually implemented in software. We in our investigations focus on its transistor level realization. Such an approach enables parallel data processing, in which the overall data rate only moderately depends on the number of particles. Most of the operations and components of such implemented PSO algorithm may be reused considering our former CMOS realizations of other self-organizing learning algorithms. This allowed us to assess main parameters of the PSO.

Improved Adaptive PSO-based Gain Tuning for PID Controllers in Utility Boilers

Niching is an important technique for multimodal optimization. Most existing niching methods require specification of certain niching parameters in order to perform well. These niching parameters, often used to inform a niching algorithm how far apart between two closest optima or the number of optima in the search space, are typically difficult to set as they are problem dependent. This paper describes a simple yet effective niching algorithm, a particle swarm optimization (PSO) algorithm using a ring neighborhood topology, which does not require any niching parameters. A PSO algorithm using the ring topology can operate as a niching algorithm by using individual particles' <i xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">local memories</i> to form a stable network retaining the best positions found so far, while these particles explore the search space more broadly. Given a reasonably large population uniformly distributed in the search space, PSO algorithms using the ring topology are able to form stable niches across different local neighborhoods, eventually locating multiple global/local optima. The complexity of these niching algorithms is only <i xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">O</i> ( <i xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">N</i> ), where <i xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">N</i> is the population size. Experimental results suggest that PSO algorithms using the ring topology are able to provide superior and more consistent performance over some existing PSO niching algorithms that require niching parameters.

This paper presents the use of particle swarm optimization (PSO) algorithm applied to the optimal design of the 4/2 switched reluctance motor (SRM). The main advantage of designing 4/2 SRM is the robust rotor structure for high speed unidirectional rotating applications such as the air conditioner's blower. In the designing process, the nite element method magnetics (FEMM) is employed to analyze the designing SRM with its optimized parameters given by PSO. This PSO algorithm is ecient and exible. The objective function is based on the ripple torque minimization with respect to rotor node position. The PSO algorithm is described and the FEMM simulation results with detailed analysis will be given for verifying optimal rotor design by PSO algorithm.