Analytical separations using packed and open-tubular capillary electrochromatography

Open-tubular capillary electrochromatography (OT-CEC) is an alternative approach to conventional CEC. The primary advantage of OT-CEC is the elimination of problems associated with frits and silica particles in conventional CEC. This report is an investigation of the utility of using a polymeric surfactant (molecular micelle) for OT-CEC. In this approach, fused-silica capillaries coated with thin films of physically adsorbed charged polymers are developed by use of a polyelectrolyte multilayer (PEM) coating procedure. The PEM coating is constructed in situ by alternating rinses with positively and negatively charged polymers, where the negatively charged polymer is a molecular micelle. This can offer a number of advantages for separation of hydrophobic analytes. In this study, poly(diallyldimethylammonium chloride) was used as the cationic polymer and poly(sodium N-undecanoyl-L-glycinate) was used as the anionic polymer for PEM coating. The performance of the modified capillaries as a separation medium is evaluated by use of seven benzodiazepines as analytes. The run-to-run, day-to-day, week-to-week, and capillary-to-capillary reproducibilities of electroosmotic flow are very good with relative standard deviation values of less than 1% in all cases. In addition, the chromatographic performance of the monomeric form of the molecular micelle is compared for the separation of these analytes. The PEM-coated capillary was remarkably robust with more than 200 runs accomplished in this study. Strong stability against extreme pH values was also observed. The general utility of this approach is discussed in detail.

Use of nanoparticles in capillary and microchip electrochromatography

Escherichia coli adhesive coating as a chiral stationary phase for open tubular capillary electrochromatography enantioseparation

We describe the use of the polymeric surfactant poly(sodium undecylenic sulfate) (poly-SUS) as a stationary phase coating in open-tubular capillary electrochromatography (OT-CEC) coupled with electrospray ionization-mass spectrometry (ESI-MS) for the analysis of beta-blocker and benzodiazepine analytes. The production of a polymeric surfactant coating on the capillary inner wall involves (i) adsorption of the cationic polymer poly(diallyldimethylammonium chloride) (PDADMAC) to the inner surface of capillary, and (ii) adsorption of the negatively charged poly-SUS onto the cationic polymer layer via strong physical interaction of the two polymer layers. As compared with micellar electrokinetic chromatography (MEKC) coupled with ESI-MS, the main advantage of this proposed method is minimization of introduction of the monomeric or polymeric surfactant into the mass spectrometer, thus avoiding the interference of the nonvolatile micelle in ESI-MS. The effects of buffer pH and applied voltage on the separation of the analytes are also discussed. Under optimum conditions, four of the five beta-blockers and four benzodiazepines are separated.

Recent applications and chiral separation development based on stationary phases in open tubular capillary electrochromatography (2019–2022)

Evaluation of a composite nanomaterial consist of gold nanoparticles and graphene-carbon nitride as capillary electrochromatography stationary phase for enantioseparation

Microorganisms attach to nonliving surfaces in many natural, industrial, and medical environments, enveloped within extracellular polymeric substances. The result is a biofilm. Biofilms are reported to exist in 65-80% of bacterial infections refractory to host defenses and antibiotics therapy and are regarded as a central problem in present-day medical microbiology. Understanding of the parameters governing the interaction of antimicrobials with biofilms is thus of great interest in any attempt to increase biocide efficacy. In this work, study was made of the feasibility of using open tubular capillary electrochromatography (CEC) in bacterial biofilm studies with living cells. Staphylococcus aureus was selected as model bacterium. First, S. aureus was shown, under various conditions, to form a biofilm on the inner wall of a fused-silica capillary coated with poly(L-lysine). Optimal conditions for biofilm formation, such as bacterial concentration, growing time, and the stability of the ensemble, were preliminarily defined with conventional 96-microtiter well plates. Continuous flushing of the capillary with fresh cells meant that no growth medium was needed. The presence of biofilm in the capillary was confirmed by atomic force microscopy. Interactions between S. aureus biofilms and different antibiomicrobial agents were studied by capillary electrochromatography. The effect of five antibiotics (penicillin G, oxacillin, fusidic acid, rifampicin, vancomycin) on biofilms was examined in terms of retention factors and reduced mobilities of the antibiotics. The antibiotic susceptibility profile for S. aureus is similar as the result of minimal inhibitory concentrations registered on the 96-microtiter well plates for both planktonic and biofilm cells. The results show, for the first time, that bacterial biofilms can be studied by CEC. The technique allows highly efficient and easy characterization of interactions between S. aureus biofilms and potentially active antimicrobial compounds under different conditions. Reagent and cell consumption are minimal.

Chiral covalent organic framework-based open tubular capillary electrochromatography column for enantioseparation of selected amino acids and pesticides.

In this work, open-tubular capillary electrochromatography (OT-CEC) method with bare gold nanoparticles (GNPs)-based stationary phase has been developed and applied for separation of tryptic peptide fragments of native and glycated proteins, bovine serum albumin (BSA), and human transferrin (HTF). The GNPs-based stationary phase was prepared by immobilization of bare GNPs, freshly reduced from tetrachloroaurate(III) ions by citrate reduction, on the sol-gel pretreated inner wall of the fused silica capillary. The separation efficiency, peak capacity, and peptide recovery of this open-tubular capillary column were investigated by varying the experimental parameters such as type and concentration of the buffering constituent and pH of the background electrolyte (BGE), temperature, and separation voltage. The best separations of the above tryptic peptides were achieved in the BGE composed of aqueous 100 mmol/L sodium phosphate buffer, pH 2.5, at separation voltage 10 kV per 47-cm long, 50 μm inside diameter capillary thermostated at 25°C. OT-CEC with bare GNPs stationary phase is shown to be a suitable technique for separation of complex peptide mixtures arising from tryptic digestion of native and glycated BSA and HTF, and for investigation of glycation (nonenzymatic glycosylation) of these proteins.

Open tubular capillary electrochromatography in etched, chemically modified 20 μm I.D. capillaries

Open tubular capillary electrochromatography (OTCEC) is an analytical technique that incorporates features of high performance liquid chromatography (HPLC) and capillary electrophoresis (CE). Polyimide capillaries can be etched to increase the low loading capacity, a potential drawback of CE. The etching process also changes the surface matrix of the capillary, thereby altering its electroosmotic properties. In addition, silanization and hydrosilation reactions exchange the silanol surface for silica hydride and incorporate a novel bonded stationary phase, resulting in unique electroosmotic properties and analyte-stationary phase interaction. In this study, the electrochromatographic behavior of certain amines, amino acids, nucleotides, and neurotransmitters was investigated as a function of electroosmotic flow, electrophoretic mobility, and chromatographic interaction with the bonded phase. It was determined that etched chemically modified capillaries provide a viable, and often superior, alternative to traditional capillaries with respect to efficiency and resolution.

Chiral drugs exert pharmacological effects through strict matching with chiral biological macromolecules and chiral recognition. Each enantiomer has different pharmacological activities, metabolic processes and rates, as well as toxicity pharmacokinetic characteristics owing to the difference in its interactions with the chiral environment. Therefore, method development for the resolution of chiral drugs is of great significance for the synthesis of chiral drugs and for quality control during the production process. Molecularly imprinted polymers (MIPs) are prepared by using a target molecule as the template. MIPs demonstrate highly specific recognition properties toward the target molecule since they have specific spatial molecular structures and functional groups. Hence, MIPs are particularly suitable for the separation and purification of chiral drugs. Capillary electrochromatography (CEC) offers the advantages of high separation efficiency and high selectivity owing to the dual separation mechanisms including capillary electrophoresis and liquid chromatography. By using MIPs as the stationary phases for CEC, the advantages of the two technologies can be combined to achieve efficient separation of chiral drugs. MIPs were first applied to CEC for chiral resolution in 1994, and since then, there have been notable advances in this field. The four main chiral separation modes in CEC involve the use of MIPs as the stationary phases of open tubular, packed, and monolithic columns, and as the pseudostationary phase in the separation medium. This review summarizes the research progress of these four methods and reveals the potential of MIPs in chiral resolution by CEC. The advantages and disadvantages of these methods are commented. MIPs as the stationary phases of packed columns can allow for chiral separation. However, the preparation of packed columns in narrow capillaries is difficult. In addition, frits must be prepared at the ends of the capillaries to seal the MIPs. The frits lead to the formation of bubbles during the CEC analysis, thus resulting in poor repeatability and stability. These problems can be overcome by using MIP-based open tubular columns. Furthermore, conditioning of open tubular columns is easy and less time-consuming. However, open tubular columns have limited capacity. MIP-based monolithic columns have greater capacity than do open tubular columns, and frits are not required in this case. However, in situ preparation of MIPs monolith in narrow capillaries is still challenging. The application of MIPs to chiral CEC can also be realized by using them as pseudostationary phases (additives) in the separation medium, and this allows for ease of operation. Moreover, the amount of MIPs introduced into the capillary can be accurately controlled. Thus, the batch-to-batch reproducibility can be improved, but this has the disadvantage of increased MIP consumption. In order to further expand the potential of MIPs in chiral CEC, the following aspects must be considered. First, improvement of the preparation method. In most reported MIP-based-chiral CEC techniques, the peaks of the imprinted molecules show severe tailing, and this problem must be resolved. Improving the mass transfer rate of the prepared MIPs may be a suitable solution in this regard. Second, development of new functional monomers. A functional monomer is an indispensable component in the preparation of MIPs. New functional monomers can be prepared according to the "three-point interaction" rule. Third, selection of template molecules. A single enantiomer of chiral drugs is used as the template molecule to prepare chiral MIPs. The method is not suitable for the preparation of MIPs of chiral drugs for which a single enantiomer is difficult to obtain. Therefore, appropriate choice of the template molecules for these drugs is imperative. Fourth, discussion of chiral separation mechanism. The mechanism of interaction between the template molecules and MIPs needs to be explored further, in order to obtain theoretical guidance for the design and preparation of chiral MIPs.

Capillary electrochromatography (CEC) has been realised as a combination of high performance liquid chromatography (HPLC) and capillary electrophoresis (CE) allowing the separation of analytes based on their differing adsorption and migration behaviour. There is a considerable interest in developing new methodologies for CEC, which uses chromatographic beads or monoliths as stationary phases or alternatively employs open tubular (OT) capillaries relying on surface modifications. Besides the bulk flat flow profile of the mobile phase in CEC columns allowing an enhanced resolution, due to the influence of the applied electrical field there are other possibilities to provide a higher resolution with better detection. As an additional newly means for peak sharpening and sample enrichment isotachophoresis and a “sweeping mechanism” could be envisaged, which both take advantage of the inhomogeneous electric field pattern in the capillary by choosing appropriate leading and terminating background electrolytes (BGEs). Transient isotachophoresis would be another technique to provide an increased plate height in the separations, using an optimized sample matrix, e.g. containing a relatively high acetonitrile content, with the same leading and terminating BGEs. In this thesis, a new method to generate a “sharpening zone”, which is similar to the concept of transient isotachophoresis, was established using an aqueous sample matrix containing an organic solvent. Target analytes within this zone could be concentrated whilst they migrated through the capillary. A novel technique was developed that used the sharpening zone for sweeping and concentrating several unresolved analyte peaks allowing an enhanced peak resolution. As the aim was to concentrate only some part of the analyte zone containing compounds of interest, the position and width of the sharpening zone needed to be well controlled. Various techniques to tune the width and position of the sharpening zone were thus developed, involving modifying the organic modifier content in the BGE, applying pressure additionally to the electroosmotic flow (EOF) and modifying the inner surface of the capillaries. This work also critically evaluated some related existing knowledge and theoretical approaches in CEC including the concept of tuneable system eigenpeaks (noncomigrating or ghost peaks caused by waves of an electric field in the capillary). Although peak broadening caused by eigenpeaks (which often suppresses resolution in CEC) has been well described for aqueous or pure non-aqueous BGEs, a systematic study of eigenmobility in aqueous/acetonitrile BGEs had not been reported. The experiments related to the eigenmobility led to a new approach to tune the eigenpeak position in chromatograms whereby a selective sample peak sharpening mechanism was elaborated using the sharpening zone. The novel approach was demonstrated for the separation of various peptides in the CE mode and for the resolution of incompletely resolved chiral amino acids in CEC. These investigations furthermore led to the development of an appropriate stationary phase, which was produced using techniques for an in-column synthesis of a molecular imprinted polymer (MIP). Well prepared MIPs are capable of specifically enhancing the retention of target analytes, herein focusing on enantio-selective isolation of chiral molecules. Since such a MIP was rather rigid, which often caused capillary clogging when used as a conventional monolithic stationary phase, this MIP was incorporated into porous layer open tubular (PLOT) capillaries. Numerous experimental difficulties were overcome with respect to the vinylisation of long fused-silica capillaries and for the polymerisation of the MIP within using thermal- and photo-polymerisations. A method for the characterization of such MIP-PLOT capillaries was elaborated involving the Langmuir adsorption theory. The new columns were evaluated using chromatography, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and CEC analysis. All experiments were designed according to the principles of Green Chemistry. These concepts involved the use of small scale analysis, simulation studies reducing the number of performed experiments, systematic studies with low amounts of solvents and materials, and optimisation of synthesis methods to reduce time, energy and reagent consumption. The theories, methods and results presented in this thesis will, in the future, allow further targeted developments of novel analytical tools for a green, sensitive, selective and improved resolution analysis of chemical and biological compounds including chiral compounds, peptides and proteins.

Capillary electrochromatography: effect of electrolyte concentration on electroosmotic flow and column efficiency

Protein separation by open tubular capillary electrochromatography employing a capillary coated with phenylalanine functionalized tentacle-type polymer under both cathodic and anodic electroosmotic flows