APEX 35

ALUMINUM 122 is an aluminum sand and permanent mold casting alloy recommended for applications where good high temperature strength, high hardness, resistance to wear and good machinability are required. It responds to an age-hardening heat treatment. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Al-48. Producer or source: Aluminum Company of America.

Raffmetal EN AB-Al Cu4Ti is a heat-treatable, aluminum-copper-titanium casting alloy in ingot form for remelting. It is used extensively for producing sand and permanent mold castings for applications requiring high strength at temperatures up to 200 °C (390 °F). This alloy’s outstanding mechanical properties make it a viable alternative to steel for certain applications. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as casting, machining, and joining. Filing Code: Al-464. Producer or source: Raffmetal S.p.A.

ALUMINUM 413.0 is normally classified as a die-casting alloy; however, it also can be used for sand and permanent-mold castings. Its high silicon content (12%) lowers its melting temperature and increases its fluidity, thus improving its castability. It is used for intricate thin-walled castings requiring pressure tightness, toughness and good resistance to corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-231. Producer or source: Various aluminum companies.

ALUMINUM 380.0 is a copper-silicon type of aluminum die-casting alloy. It has good castability and fairly good machinability; it is the most widely used aluminum die-casting alloy. It has satisfactory strength and ductility. Among the many applications of Aluminum 380.0 are internal combustion engine parts, pressure-tight castings, ornamental castings and machine frames. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Al-239. Producer or source: Various aluminum companies.

Inconel Alloy 725HS is a Ni-Cr-Mo-Cb alloy that is age hardenable and is a higher strength version of Inconel alloy 725 (see Alloy Digest Ni-445, January 1994). The alloy is corrosion resistant and is often used in fastener or marine fabrication applications. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as heat treating and machining. Filing Code: Ni-604. Producer or source: Special Metals Corporation.

AISI Type 204 is a chromium-nickel-manganese type stainless steel comparable in properties to Type 304 stainless steel. It is austenitic, non-magnetic, and highly corrosion resistant. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-163. Producer or source: Stainless steel mills.

ARMCO 400 is a low-chromium (low-cost) non-hardenable ferritic stainless steel with relatively high corrosion and oxidation resistance and good fabricating characteristics: This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: SS-250. Producer or source: Armco Steel Corporation, Advanced Materials Division.

MISCO-C is a 29% Cr-9% Ni type casting alloy having high corrosion and heat resistance. It is a type CE-30 stainless steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, and joining. Filing Code: SS-15. Producer or source: Michigan Steel Casting Company, Alloy Casting Division. Originally published June 1954, revised April 1965.

ALUMINUM 850.0 is an aluminum-tin-nickel-copper alloy for bearings. It is used principally in the form of permanent-mold castings which, because of their rapid solidification, are characterized by a fine, dense, fatigue-resistant structure. Solid bearings machined from permanent-mold castings of this alloy are used principally in the artificially aged T5 temper for heavy-duty engine bearings. In this field Aluminum 850.0 alloy has provided satisfactory performance under conditions of very high unit loading at medium speeds and temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, forming, heat treating, machining, joining, and surface treatment. Filing Code: Al-252. Producer or source: Various aluminum companies.

Republic RS-110A is a titanium alloy containing manganese as its principle alloying element. The alloy is a medium strength, highly formable sheet alloy which has been used extensively as an aircraft structural material. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-35. Producer or source: Republic Steel Corporation, Titanium Division.

CLC 18.10LN is an austenitic stainless steel with 18% Cr, 9.5% Ni, and 0.14% N to provide good corrosion resistance at strengths above the other low-carbon stainless steels. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, machining, and joining. Filing Code: SS-950. Producer or source: Industeel USA, LLC.

Pyromet Alloy 617 is both oxidation resistant and very strong at high temperatures. It has one of the highest allowable stress values in the ASME Boiler and Pressure Vessel Code at 982 deg C (1800 deg F). This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and machining. Filing Code: Ni-695. Producer or source: Carpenter Specialty Alloys.

MUELLER ALLOY 1820 (formerly MBCo 902) is a chromium-copper alloy with high electrical conductivity, high mechanical strength, and superior creep, fatigue and wear properties. It is used for resistance welding electrodes, switchgear, and electrical and electronic parts. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-257. Producer or source: Mueller Brass Company.

Aluminum Alloys 360 and A360 are die casting alloys having good strength, good corrosion resistance, and excellent castability. Alloy A360 is a purer form of Alloy 360, having lower impurity maximums. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Al-103. Producer or source: Aluminum Company of America.

ALUMINUM A332.0 is an aluminum-silicon-nickel-copper-magnesuim alloy recommended for high-strength permanent-mold castings. The as-cast material can be aged to increase hardness and strength, or it can be solution treated and aged. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-216. Producer or source: Various aluminum companies.