REPUBLIC RS-110A

Ti-4A1-3Mo-IV is an alpha-beta type titanium alloy having a good combination of high strength, creep and stability at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear, bearing, and bend strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-26. Producer or source: Titanium Metals Corporation of America.

ALUMINUM 850.0 is an aluminum-tin-nickel-copper alloy for bearings. It is used principally in the form of permanent-mold castings which, because of their rapid solidification, are characterized by a fine, dense, fatigue-resistant structure. Solid bearings machined from permanent-mold castings of this alloy are used principally in the artificially aged T5 temper for heavy-duty engine bearings. In this field Aluminum 850.0 alloy has provided satisfactory performance under conditions of very high unit loading at medium speeds and temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, forming, heat treating, machining, joining, and surface treatment. Filing Code: Al-252. Producer or source: Various aluminum companies.

ALUMINUM 380.0 is a copper-silicon type of aluminum die-casting alloy. It has good castability and fairly good machinability; it is the most widely used aluminum die-casting alloy. It has satisfactory strength and ductility. Among the many applications of Aluminum 380.0 are internal combustion engine parts, pressure-tight castings, ornamental castings and machine frames. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Al-239. Producer or source: Various aluminum companies.

AISI Type 204 is a chromium-nickel-manganese type stainless steel comparable in properties to Type 304 stainless steel. It is austenitic, non-magnetic, and highly corrosion resistant. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-163. Producer or source: Stainless steel mills.

ARMCO 400 is a low-chromium (low-cost) non-hardenable ferritic stainless steel with relatively high corrosion and oxidation resistance and good fabricating characteristics: This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: SS-250. Producer or source: Armco Steel Corporation, Advanced Materials Division.

Inconel Alloy 725HS is a Ni-Cr-Mo-Cb alloy that is age hardenable and is a higher strength version of Inconel alloy 725 (see Alloy Digest Ni-445, January 1994). The alloy is corrosion resistant and is often used in fastener or marine fabrication applications. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as heat treating and machining. Filing Code: Ni-604. Producer or source: Special Metals Corporation.

RMI 8A1-1Mo-1V is an alpha-beta titanium alloy with a tensile strength of 135,000 psi in the mill-annealed condition. It has an excellent combination of tensile strength and creep resistance that makes it suitable for service to 1000 F. It is recommended for aircraft and jet-engine parts requiring high strength with superior creep resistance and toughness. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: Ti-84. Producer or source: RMI Company.

CLC 18.10LN is an austenitic stainless steel with 18% Cr, 9.5% Ni, and 0.14% N to provide good corrosion resistance at strengths above the other low-carbon stainless steels. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, machining, and joining. Filing Code: SS-950. Producer or source: Industeel USA, LLC.

Pyromet Alloy 617 is both oxidation resistant and very strong at high temperatures. It has one of the highest allowable stress values in the ASME Boiler and Pressure Vessel Code at 982 deg C (1800 deg F). This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and machining. Filing Code: Ni-695. Producer or source: Carpenter Specialty Alloys.

APEX 85 is beat treatable aluminum sand and permanent mold casting alloy. It is recommended for applications where good high temperature strength, high hardness, resistance to wear and good machinability are required. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-177. Producer or source: Apex Smelting Company.

MUELLER ALLOY 1820 (formerly MBCo 902) is a chromium-copper alloy with high electrical conductivity, high mechanical strength, and superior creep, fatigue and wear properties. It is used for resistance welding electrodes, switchgear, and electrical and electronic parts. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-257. Producer or source: Mueller Brass Company.

ALUMINUM 413.0 is normally classified as a die-casting alloy; however, it also can be used for sand and permanent-mold castings. Its high silicon content (12%) lowers its melting temperature and increases its fluidity, thus improving its castability. It is used for intricate thin-walled castings requiring pressure tightness, toughness and good resistance to corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-231. Producer or source: Various aluminum companies.

Aluminum Alloys 360 and A360 are die casting alloys having good strength, good corrosion resistance, and excellent castability. Alloy A360 is a purer form of Alloy 360, having lower impurity maximums. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Al-103. Producer or source: Aluminum Company of America.

ALUMINUM A332.0 is an aluminum-silicon-nickel-copper-magnesuim alloy recommended for high-strength permanent-mold castings. The as-cast material can be aged to increase hardness and strength, or it can be solution treated and aged. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-216. Producer or source: Various aluminum companies.

ALUMINUM 520.0 is an aluminum-magnesium casting alloy containing nominally 10% magnesium. It is characterized by an excellent combination of machinability, mechanical properties and resistance to corrosion. Typical applications are railroad passenger car frames and marine parts. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-237. Producer or source: Various aluminum companies.